Building Filters
- Trusted Seller
2014 Cincinnati Milacron MTs 125
- Manufacturer: Cincinnati
Core Pull, Air Blast *Spec Sheet Available* Machine type: Injection Molding Machines | Machine location: Idaho | Stock #: 522179 | Clamping capacity: 125 Ton | Shot size: 7.6 Oz | Controller: Endura Touch Control...
- Trusted Seller
2016 Krauss Maffei 300-1000CX
- Manufacturer: Krauss-Maffei
- Model: 300-1000CX
Features: Air Core Pull on Fixed Platen Blue Power EURO67 Robot Interface EURO73 Robot Interface for Side Entry Pneumatic Hot Runner Control Low Hours
- Trusted Seller
2002 Van Dorn 500SP2800
- Manufacturer: Van Dorn Demag
Equipment Overview This 2002 Van Dorn Demag 500SP2800 is capable of consistent, high-volume PET preform or industrial molding. Its 1,676 g shot capacity significantly exceeds your 960 g requirement, and the large...
- Trusted Seller
2022 Tederic E328-E500C
- Manufacturer: Tederic
FEATURES Clamping Unit – SPI platens – High rigidity clamping unit with contactless tie bars – Mechanical and Electrical Safety – Heavy duty ball screw – Hydraulic ejector – 1 x hydraulic core pull – Oversized ad...
- Trusted Seller
2022 Tederic NEO E478-E500c
- Manufacturer: Tederic
FEATURES Clamping Unit – SPI platens – High rigidity clamping unit with contactless tie bars – Mechanical and Electrical Safety – Heavy duty ball screw – Hydraulic ejector – 1 x hydraulic core pull – Oversized ad...
- Trusted Seller
2023 600 Ton LS Mtron LSG-600H-i35a Injection Molding machine
- Manufacturer: LS Mtron
Available: 2023 600 Ton LS Mtron LSG-600H-i35a: US Tonnage: 606 Shot size: 60 Oz. Screw Diameter: 75 mm. Tie bar spacing: 36.6" x 36.1" Platen Size: 53.1" x 50.4" Max. Open daylight: 65" Control: KEBA 18.5...
Illinois, USA - Trusted Seller
2012 123 US Ton Nissei FNX110-12A Hybrid Injection Molding machine
- Manufacturer: Nissei
- Model: FNX110-12A
2012 123 US Ton Nissei FNX110-12AHybrid Injection Molding machine: Shot size: 5.3 Oz Screw size: 40 mm Screw type: GP screw. Note: You can choose the 40 mm (GP) or a 28 mm (Made in CPM). Only one screw can be...
Vermont, USA 
2004 Autojector EV-200 7.58
- Manufacturer: Autojector
Size: 200 | Shot size: 12.08 | Clamp style: Vertical | Daylight: Max 25" | Core pull: Yes | Controls: Camac | Clamp type: Rotary | Table size: 58" | Injection orient: Horizontal | Voltage: 460/3/60 | – screw dia...
Valley City, OH
2000 Engel ES330H/85VRB
- Manufacturer: Engel
Ejector Stroke-5″ Rotary Table Dia-38.39″ Clamp Stroke- 11.81″
Valley City, OH
2002 Husky HL1000 RS155/135
- Manufacturer: Husky
- Model: HL1000 RS155135
Size: 1100 | Shot size: 296 oz. | Clamp style: Hydraulic | Platen size: 81" x 71" | Dbtb: 61" x 52" | Daylight: Max 90.4" | Hko: Yes | Core pull: Yes | Controls: Polaris | Clamp type: Single Station | Max mold s...
Valley City, OH
2005 Arburg 420C 800-250VU
- Manufacturer: Arburg
- Model: 420 C
Euromap Platens 35 mm screw Min Mold Height – 250mm Clamp Stroke- 500mm New screw & barrel New Heater Bands
Valley City, OH- Trusted Seller
BOY 60E
- Manufacturer: Boy
Injection molding machine BOY 60E Injection molding machine BOY 60E. Fully hydraulic injection moulding machine which is characterized by precision, performance, energy efficiency and compact design, simultaneous...
Vissenbjerg, Denmark - Trusted Seller
2018 HAITIAN ZHAFIR ZERES ZE1900
- Manufacturer: HAITIAN
This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZH...
Germany - Trusted Seller
Stork SXS 2500-1450 I Injection Molding
- Manufacturer: Stork
We hereby offer this used Stork SXS 2500-1450 injection molding from 2010, located in The Netherlands. This robust machine boasts a formidable clamping force of 2500 kN, ensuring optimal performance across a wide...
1999 Ergotech50/370_200 DEMAG
- Manufacturer: Demag
- Model: Ergotech
Demag Ergotech 50/370_200 Closing 50 tons Year 1999 D227ee Scrow 30mm Spray weight 94 g Bar spacing 37x37 Core pull x3
Vienna, Austria
