Used side by side

Trusted Seller
DMG MORI 1.250" Double Sided Boring Bar Holding Block T10100A09 (LOC3279)
- Manufacturer: DMG Mori
- Model: T1
DMG MORI 1.250" Double Sided Boring Bar Holding Block T10100A09 (LOC3279) Condition:New For NL/NLX/NZX
$950 USD
Lansing, MI
Trusted Seller
DMG Mori 1.5" Double Sided Boring Bar Holding Block T10134A05/BD 007 IN (LOC1677
- Manufacturer: DMG Mori
- Model: T1
Mpn: T10134A05/BD 007 IN | Material: Steel | Coolant through: Yes | Warehouse location: LOC1677 | Shank capacity: 1.5"
$800 USD
Lansing, MI
1996 MORI SEIKI CL-25B CNC LATHE SIDE CONTROL PANEL
- Manufacturer: Fanuc
HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY
$115 USD
Los Angeles, CA
1996 MORI SEIKI CL-25B CNC LATHE INTERLOCK SIDE CONTROL PANEL
- Manufacturer: Fanuc
HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY
$80 USD
Los Angeles, CA
OKUMA CROWN CNC LATHE HIGH PRESSURE COOLANT SIDE DISCHARGE MANUAL P-K762-008-E
- Manufacturer: Fanuc
“120 DAY WARRANTY. REMOVED FROM MACHINE” OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION NEXT DAY AIR SERVICE AVAILABLE ON AL...
$60 USD
Los Angeles, CA
Trusted Seller
2006 Nakamura Tome TW-20MM
- Manufacturer: Nakamura tome
- Model: TW-20MM
Twin Facing Spindles Design Full "C" Axis Spindle Rotation Both Spindle Live Milling / Drilling Capability on Both Turrets Collet Chuck - Both Spindles Barfeed Interface LNS Quick Load Servo S3 Short Bar Feed Uni...
$134,950 USD
Get financing
Est. $2,540/mo
Massachusetts, USA
Trusted Seller
2006 NAKAMURA-TOME TW-20MM
- Manufacturer: Nakamura
- Model: TW-20MM
Used CNC Lathe: 20 hp, 5,000 RPM, 8.5" turning dia. Comes with Fanuc 18i-TB, twin spindles, live milling, collet chucks, barfeed interface, chip conveyor, and more. Maximum Bar Capacity Left Side / Right Side 2.5...
Ohio, USA
Trusted Seller
2000 OKUMA MACTURN 30
- Manufacturer: Okuma
- Model: Macturn 30
5-axis CNC lathe, 20 hp, 4,500 RPM max, 80-tool changer, full contouring B-axis, Y-axis capability, C-axis rotation. Includes tool presetter, coolant system, chip conveyor. Used, functional. Upper B Axis Turret F...
Ohio, USA
Trusted Seller
2015 Romi C680
- Manufacturer: Romi
- Model: C680
- Spindle bore: 171.95799999999997 millimeter
ROMI C680 CNC TURNING CENTER, Siemens Sinumerik 828D CNC Control, 16" 3-Jaw Chuck & 19" 4-Jaw Chuck, 27" Swing, 118" Between Centers, 2.55" Thru Hole, 1800 RPM, 2-Sided Tool Post, Steady Rest, Chip Conveyor & Coo...
Cincinnati, OH
Trusted Seller
2010 Okuma LU45-M
- Manufacturer: Okuma
- Model: LU45M
Options Included – Live Tooling Dual Turrets Extended Tailstock Steadyrest Airblow Auto Door Service Reports Available Upon Request Completed in December 2019 12.17.19 Replaced 3 operator windows. Replaced light ...
$129,900 USD
Get financing
Est. $2,445/mo
Chicago, IL
Trusted Seller
2013 Okuma LT-3000EX 2T2MY
- Manufacturer: Okuma
- Model: LT3000 EX
- Spindle bore: 80.00999999999999 millimeter
Y-axis on Upper and Lower Turret Full C-axis (0.001 deg) on Main and Sub-Spindle Side Discharge Chip conveyor MP 1000 PSI Coolant Thru Transformer 2 Axial Tool holders. 8 Radial Tool Holders
$179,500 USD
Get financing
Est. $3,378/mo
Chicago, IL
Trusted Seller
2013 Okuma LT-3000EX 2T2MY
- Manufacturer: Okuma
- Model: LT3000 EX
- Spindle bore: 80.00999999999999 millimeter
Y-axis on Upper and Lower Turret Full C-axis (0.001 deg) on Main and Sub-Spindle Side Discharge Chip conveyor MP 1000 PSI Coolant Thru Transformer 4 Axial Tool holders 7 Radial Tool holders
$179,500 USD
Get financing
Est. $3,378/mo
Chicago, IL
Trusted Seller
2018 OKUMA GENOS L300-M
- Manufacturer: Okuma
- Model: GENOS L300
CNC Lathe, used, with 20 hp, 4,500 RPM, and 8" hydraulic hollow chuck. Equipped with OSP-P300LA-e control, coolant system, chip conveyor, and Rebel V-80 bar feeder. Current hours: 7,120. Coolant System with Separ...
Ohio, USA
Trusted Seller
2020 OKUMA GENOS L300-MYW
- Manufacturer: Okuma
- Model: GENOS L300
5-axis CNC lathe used with OSP-P300LA-e control, 15 hp, 3,800 RPM max, and 10" chuck. Features Y-axis, tool stations, 1000 PSI coolant pump, modified parts catcher, and Edge Technologies Rebel V-80 bar feeder. Y-...
Ohio, USA
Trusted Seller
2011 DOOSAN PUMA TT1800SY
- Manufacturer: Doosan
- Model: PUMA TT1800SY
- Spindle bore: 75.946 millimeter
Used CNC lathe with dual turrets and sub spindle. Features include FANUC 31i control, live milling, and Y-axis. Comes with FMB Turbo barfeed, LNS ChipBlaster, and Mist-Fit collector. FANUC 31i-MODEL A CNC CONTRO...
Ohio, USA