Used Cnc Lathes in Florida, USA

Trusted Seller
2007 Okuma Captain-L470M 15559
- Manufacturer: Okuma
- Model: Captain L470
Bar capacity: 3.500 | Chuck description: B-215 Kitagawa 3-Jaw Hydraulic Chuck | Chuck size: 15.00 | Chuck type: Hydraulic | Distance between centers: 49.20 | Control make/model: OSP-P200L CNC Control | Live mill...
Maitland, FL
Trusted Seller
2022 Okuma LB-4000EX-II/C750 15506
- Manufacturer: Okuma
- Model: LB4000 EX
Chip Conveyor: LNS Right Hinge 52" Temperature Regulator Hydraulic Oil Shower Coolant Prepped for Mist Collector
Maitland, FL
Trusted Seller
2002 Okuma Impact LU15M 15482
- Manufacturer: Okuma
- Model: IMPACT LU 15
X-Axis Travel (Upper/Lower) 10.24"/5.51" Z-Axis Travel (Upper/Lower) 25.20"/24.21"
Maitland, FL
Trusted Seller
2021 DN Solutions Lynx 2100LSYB 15367
- Manufacturer: DN Solutions
Parts Conveyor Control options: Rigid Tapping | 2nd chuck description: 3-Jaw Chuck | Bar capacity: 2.600 | Barfeeder make / model: LNS Quick Load Servo 80+ Barfeeder | Chuck description: 3-Jaw Chuck | Chuck size:...
Maitland, FL
Trusted Seller
2011 Okuma Genos L200E-M 14657
- Manufacturer: Okuma
- Model: GENOS L200E-M
Travels: - C-Axis: 0.001 degrees Royal 5C Collet Chuck Royal 16C Collet Chuck 3-Jaw Chuck Barfeeder Control Ready (Does NOT include barfeeder)
Maitland, FL
Trusted Seller
2004 Mazak Integrex 15550
- Manufacturer: Mazak
- Model: INTEGREX
Y-Axis Travel: 25.6" B-Axis Head Tilt: -30° to +210° C-Axis Index: 0.001° Coolant Through Milling Head CAT#50
Maitland, FL
Trusted Seller
2016 Citizen Miyano-BNA 42S2 15332
- Manufacturer: Citizen
- Model: Miyano BNA42S
Barfeeder Additional control options: Interpolation Threading 800 Registered Programs Tool Nose R Compensation | Control options: Color Monitor, G-Code, Rigid Tapping, Manual Pulse Generator / Pendant | B-axis tr...
Maitland, FL
Trusted Seller
2006 Ganesh Cyclone-32CS 15161
- Manufacturer: Ganesh
Y-Axis Travel: 19.29” Minimum Input Unit: 40 Millionths OD Turning Tool Positions: 6 OD Tools ID Turning Tool Positions: 5 ID Tools OD Turning Tool size ½” ID Turning Tool Bore Size 25 mm Spindle Center Height 40...
Maitland, FL
Trusted Seller
2005 Mori Seiki ZT2500Y 14830
- Manufacturer: Mori Seiki
- Model: ZT-2500
Spindle Bearing Inner Diameter: 5.1″ Subspindle Travel: 38″ C-Axis Indexing: .001° Rotary Tool Spindle Speed: 4,000 RPM X-Axis Travel (Turret 1 / Turret 2): 11″ / 7.9″ Y-Axis Travel (Upper Turret Only): +/- 2.8″ ...
Maitland, FL
Trusted Seller
2001 Milltronics ML14 14088
- Manufacturer: Milltronics
- Model: ML14
Teach, Manual, and Automatic Modes Dual Electronic Handwheels Yaskawa Spindle Drive Hardened and Ground Bedways
Maitland, FL
Trusted Seller
2014 Haas ST-10 13564
- Manufacturer: Haas
- Model: ST-10
Control options: Early Power Failure Detection, Rigid Tapping, Ethernet / LAN | Turret options: Bolt-On Tool Style Turret | Auction url: { blankshield(document.getElementById('rtp_Uq9DMr').parentElement);}); ...
Maitland, FL
Trusted Seller
2017 Nakamura Tome WT-150MMYS 15369
- Manufacturer: Nakamura tome
- Model: WT-150MMYS
Hainbuch SPANNTOP Pull Back Nove Collet Chuck – Left Spindle Hainbuch SPANNTOP Nove Collet Chuck – Right Spindle Y-Axis on Upper Turret ChipBlaster JV40 – 1,000 PSI High-Pressure Coolant System Keller Tramp Oil S...
Maitland, FL
Trusted Seller
2018 SMEC SL2000T2Y2 12666
- Manufacturer: SMEC
- Model: SL2000T2Y2
Travels: - X2 Axis: 6.6" - XB Axis: 4.72" - Y1 Axis: 4.13" - Y2 Axis: 4.13" - Z2 Axis: 27.9" - ZB Axis: 28.3" (4) Live Tool Holders
Maitland, FL
Trusted Seller
2008 Doosan Puma 240 15450
- Manufacturer: Doosan
- Model: PUMA 240
C-Axis Travel: .001 ATS main and sub Parts Conveyor
Maitland, FL
Trusted Seller
2018 Tsugami M08SY-II 14132
- Manufacturer: Tsugami
- Model: M08SY
Travels: - Y-Axis: ± 1.97" - A-Axis: 19.92" LNS Chip Conveyor
Maitland, FL
Tornos Swiss GT26 CNC Lathe
- Manufacturer: Tornos
- Model: Swiss GT26
Good condition Tornos Swiss GT26 CNC Lathes manufactured in 2017. Located in USA and other countries. Click request price for more information.
USA