Used Processing in Poland

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

2021 RYCSYSTEM

• Manufacturer: RYCSYSTEM

The bottling line is used for automated dosing, then filling and labeling of liquid products. These can be food products such as juices and beverages, as well as other products (chemicals, cosmetics, pharmaceutic...

2020 WENZHOU FURI MACHINERY CO. LTD. FRTB-SD3-C

• Manufacturer: WENZHOU FURI MACHINERY CO. LTD.

DIGI AW-5600FX

• Manufacturer: DIGI

DIGI AW-5600FX packaging machine

2020 AULONA MACHINERY S.r.l MPB – 25

• Manufacturer: AULONA MACHINERY S.r.l

2022 TOYO MACHINERY&METAL CO., LTD. Japonia Si-350-6S/JH750E

• Manufacturer: Toyo

Clamping force: 3430 kN | Screw diameter: 60 mm | Injection speed: 300 mm/s | Injection pressure: 220 MPa | Control: SYSTEM 800, Euromap 67, Euromap 73 interface

2019 HAITIAN JUPITER JU III 5500 / 3430

• Manufacturer: HAITIAN

Screw model ϕ 80 mm B Clamping force: 5500 kN | Injection weight: 1830 g | Injection pressure: 159 MPa | Installed power: 59 Kw | Max mold height: 900 mm | Ejector stroke: 250 mm | Ejector force: 110 kN | Mold op...

2017 Reepack REETRAY 25

• Manufacturer: Reepack

Vacuum pump 40 - 60 m3/h Tray dimensions max: 430 x 305 mm

2021 GUDEPOL GD-SMART 11/10

• Manufacturer: GUDEPOL

Motor power: 11 kW | Maximum pressure: 10 bar

Compressor Suction EKOM DUO/M (with box, with membrane dryer)

New, Made in Slovakia, Compressor DK50 PLUS + Suction machine Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 1 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar)...

SUCTION PUMP FOR EKOM 2.1-10 (stationary mammal in a box)

new Slovak production, Mammal in silent housing size DK50.10S, The mammal is standard equipped with a control module that starts the device after 24V AC / DC signal from the unit. The box effectively reduces the ...

SUCTION PUMP FOR EKOM 2.1Z (stationary mammal without housing)

new Slovak production, Mammal without silencing housing, The mammal is standard equipped with a control module that turns on the mammal after 24V AC / DC signal from the unit, Technical data: Rated voltage / freq...

Compressor and Mammal EKOM DUO 2 (with box)

New, Made in Slovakia, Compressor DK50 2V + 2 suckers Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 2 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar): 140 l....

EKOM DUO Compressor and Suction (with box)

New, Slovak Manufacture, Compressor DK50 PLUS + Suction, Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 1 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar): 75 ...