Used Processing in Michigan, USA

2002 JOHNFORD DMC-1200H

• Manufacturer: Johnford
• Model: DMC1200H

JOHNFORD DMC-1200H DMC SERIES – MOVING TABLE BRIDGE MILLS 2002 Specifications X 47.2" Y 35.4" Z 30" Power 24.8 hp RPM 10,000 RPM # ATC 24 Taper hsk 100 Table-L 51.2" Table-W 33.5" Weight 26,4...

MAYFRAN 2 available

• Manufacturer: MAYFRAN

Width: 12 inches | Length: 132 inches

Ransburg A12425-00 Catalyst Flow Sensor Module

• Manufacturer: Ransburg

Came from working unit 30 day warranty Wr19 Bin8

Graco Triton 1:1 150 ( 233501)

• Manufacturer: Graco

Came from working unit 30 day warranty Wr20 Mpn: 3D350 | Flow rate: 5.5 GPM

GRIEVE HB-500 ELECTRIC HEAT TREAT FURNACE

• Manufacturer: Grieve

Grieve Electric Heat Treat Furnace, Model Modified HB-500, S/N 510353, Work Area 38"W X 38"H X 40"L, 230V/3/60, 45 Amps, 15 Kw, Overall Size 67"W X 91"H X 52"L, Double doors with Brixon spring tension latches and...

GRIEVE AB-500 ELECTRIC HEAT TREAT FURNACE

• Manufacturer: Grieve

Grieve Electric Oven, Model AB-500, S/N 41298, 500 Degrees F, Work Area 36"W X 36"H X 36"L, 230V/3/60, 20 Amps, 6.6 Kw, Overall Size 54"W X 79H X 60"L, Single door with high temperature silicone rubber gasket and...

24" x 8' "Steel Trak" Conveyor by New London Engineering

• Manufacturer: TRAK

2016 HENNIG 102627

• Manufacturer: HENNIG

Standard Specifications "Goose Neck" Style 17.75" Belt Width Dimpled Hinge Belt Conveyor Variable Frequency Drive 94.61" Overall Length

MAYFRAN 18" x 15' Steel Belt Conveyor

• Manufacturer: MAYFRAN

Pheumatic Conveying Conveyor macawber NEW!

• Manufacturer: macawber

Pheumatic Conveying Conveyor macawber NEW!. Condition is "New". Shipped via freight

THERMAL CARE AQ0W1004 10 Ton Water Cooled Chiller Used

• Manufacturer: Thermal Care

Accuchiller 10 Ton Water Cooled 10 HP Compressor 5.0 HP Process Pump R-438A Refrigerant @ 12 Lbs 30°/70°F Min/Max Temp Heat Transfer Fluid: 30% Glycol 460 Volt 3 Phase 60 Hz 24 F.L. Amps Tested Good ...

CINCINNATI MILACRON Dryer w/ 3 Hoppers & Loaders DD-1700 HOP USED

• Manufacturer: Cincinnati

Una-Dyn Dehumidifying Drying System DHD-25 Approx. 850-900 Lbs. per. Hour **Please look at all pictures to see what is included** Pre-Cooler Included Heater Hose not Included Need Desiccant Replaced 7.5 HP...

10' X 24" WIDE ROLLER CONVEYORS Stock# 11016

Used roller conveyor, 10' length, 24" wide. Overall width is 28 1/4", with 25" between frames. Rollers have a 2 1/2" diameter and are placed on 6" centers. Features include fixed vertical rollers and 32" roller h...

2008 Fanuc M-410ib/300 R30iA controller *Very Low hours

• Manufacturer: Fanuc
• Model: M-410
• Load capacity: 300 kilogram
• no. of axis: 4 axis

Fanuc M-410iB/300 with R30iA controller is an industrial palletizing robot that can handle heavy payloads up to 300kg.