- Trusted Seller
2010 Nagano Science LH 21 - 12 M
- Manufacturer: Nagano Science
Machine Specifications Power supply AC200V (within 190 to 220V) 3φ 50/60Hz Maximum load current (main breaker) 18.5A (30A) Operating ambient temperature range +5°C to +35°C Temperature/Humidity Range Temperature/...
Tokyo, Japan - Trusted Seller
2016 AIRMAN PDS670SD-4C5
- Manufacturer: ������������
Hours: 3531H | Specification: 0.7MPa.TRAILER TYPE
Chiba, Japan - Trusted Seller
2005 TOSHIBA IS850GT-81A
- Manufacturer: Toshiba
- Model: IS850
Screw dia: 105mm | Shot volume: 4320cm3 | Distance between tie rods: 1060x1060mm | Platen size: 1530x1530mm | Daylight opening: 2250mm
Chiba, Japan - Trusted Seller
2005 NIIGATA ALL ELECTRIC MD450S-IV
- Manufacturer: Niigata
- Model: MD450
Screw dia: 76mm | Shot volume: 1588cm3 | Distance between tie rods: 810x810 | Daylight opening: 1550mm
Chiba, Japan - Trusted Seller
Chiba, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems ST-230C
- Manufacturer: Hitachi Industrial Equipment Systems
Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.
Tokyo, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems SRL-11DMNA5
- Manufacturer: Hitachi Industrial Equipment Systems
- Model: SRL-11
Machine Specifications Low noise scroll type oil-free dryer built-in package type ○ Configuration Main unit SRL-5.5CB Dryer HDP-110A ○ Capacity Output 5.5x2 kW 3-phase 50Hz Maximum pressure 0.8MPa Blowing volume ...
Tokyo, Japan 
Tsukuba, Japan
$509 USDTsukuba, Japan
Tsukuba, Japan
$1,696 USDTsukuba, Japan
Caterpillar 389mm Height Condenser Coil: PN 552-8372; 高さ389mm のコンデンサーのコイル
- Manufacturer: Caterpillar
Part no: 552-8372
$576 USDTsukuba, JapanCyto centrifuge made in 1993
- Manufacturer: サイトウ遠心機
200V No operation panel Where to use: Chemical factory Food factory Feed and fertilizer factory Water treatment plant | Processing power: 3m3 / h | Rotation speed: 7300rpm | Power: 5.5kw | Material: Wetted parts ...
Kure, Japan
plastic injection machine
- Manufacturer: Sumitomo
two unit electric plastic injectionmachine . JSW 20 ELIII . And Sumitomo Se30D . Please attached photos
Japan1992 Belltong Engineering Model KP-110-1000
- Manufacturer: 鐘通エンジニアリング
RPF Production Equipment Waste Plastic Volume Reducing Machine (PLAPACK) Parts replacement (sequencer) is required for the operation panel. With drawing, specification and instruction manual
Kure, Japan
Mitsubishi SJ 6000 Centrifugal Separator
- Manufacturer: Mitsubishi
- Model: SJ 6000
Good condition Mitsubishi SJ 6000 Centrifugal Separators manufactured in 2010. Located in Japan and other countries. Click request price for more information.
Japan
Tip: Enter manufacturer, model or keyword
