Used Processing in Hiroshima, Japan

2007 Buhler SDV 1100
- Manufacturer: ビューラー
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan
2006 uzax 1050l
- Manufacturer: ユザックス
Material: SS | Quantity saved: One
Hiroshima, Japan
2006 Veolia CMF12
- Manufacturer: ヴェオリア
PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...
Hiroshima, Japan
1999 Mitsubishi Kakoki SJ-50F
- Manufacturer: 三菱化工機
6500 rpm, 5520 L/h, explosion-proof specification Previous experience: refining fuel oil (C fuel oil) We only have enough for one set of disassembling tools, so the remaining two units will be purchased or manufa...
Hiroshima, Japan
Magellan PT-60
- Manufacturer: Mazellar
Mixing volume: 60 L Remarks Catalog Power: 0.2kw | Material: Main section SUS | Quantity saved: One
Hiroshima, Japan
2024 Tanabe Wiltech SHC-400D
- Manufacturer: タナベウィルテック
Material of main parts such as screws: SUS316 (stellited cutting edges). Currently 400V specification, but rewinding to 200V is available. Screen hole diameter 100mm Basket diameter φ400
Hiroshima, Japan
1979 Izumi Food Machinery Cylinder Vertical
- Manufacturer: Izumi
Jacket / stirrer (0.75 kw, two stirring blades) Closed type, with shower ball / manhole
Hiroshima, Japan
1984 Iwai machine cylinder vertical type
- Manufacturer: Iwai Machinery
Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole
Hiroshima, Japan
1996 HAKKO INDUSTRIES (now GL HAKKO) 6000L
- Manufacturer: Hakko
Explosion-proof, cyclo reducer (reduction ratio 1/15). Shaft seal: mechanical seal. Maximum pressure of main unit: FV to 0.18 MPa / Jacket: 0.54 MPa. Design temperature: [Body] -20 to 170°C / [Jacket] -20 to 200°C.
Hiroshima, Japan
Mutual Sangyo RM-1000
- Manufacturer: 相互産業
Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
Four stirrer paddles
Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1
Hiroshima, Japan
SUS tank with coil
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
Asada Ironworks MHK-20
- Manufacturer: 浅田鉄工
Due to long-term storage after maintenance, immediate delivery is not possible, but delivery can be made in a short period of time. Hydraulic unit available Drawings available
Hiroshima, Japan
Tokyo Coki MT-CD-2
- Manufacturer: 東京コーキ
Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...
Hiroshima, Japan
Tomoe Kogyo AS-26
- Manufacturer: 巴工業
Three-phase separation Rotation speed: 15,000 rpm With startup board Click here to see a video of the trial run when the maintenance was completed (YouTube).
Hiroshima, Japan