Used Processing in British Columbia, Canada

Line Shaft Box Conveyor

Line Shaft Box Conveyor. Consists of: 13 sections of used line shaft conveyor. Each 10 ft. long. 24 in. overall width. 22 in. between rails. 1.9 in. diva rollers on 3 in. centers. 2 sections are 10 ft. long. 0.5 ...

18 in. x 26 ft. Belt Conveyor

2 HP Eurodrive: Trough width: 18 inch. | Belt width: 17 inch. | Overall length: 26 ft. | Cleats: 1 in. high, Spaced at 24 in. apart. | Volts: 208/460 Volt. | Ratio: 18:1.

20in. Wide x 17ft. Long H-Beam Conveyor

Head Pulley 22.5" Diameter x 19" Wide Smooth Steel Tail Pulley 22.5" Diameter x 19" Wide Smooth Steel Troughing Idlers 10° Belt 20" Wide 1 Ply H-Beam Dimensions: 6" Tall x 3.5" Wide Overall Dimensions:

16in x 26ft Channel Conveyor

Head Pulley 12in Diameter x 24in Wide Steel Tail Pulley 12in Diameter x 20in Wide Steel Wing Style Troughing Idlers 10° Belting 16in Wide x 0.25in Thick 3 Ply Motor and Reducer Phase 3-Phase

20in Wide x 69in Long Feed Conveyor

Pulleys: Overall Dimensions: Size: 20in Wide x 69in Long x 24in High | Belt: 20in Wide, 2-Ply, 0.5in Thick | Head: 16in Dia. x 26in Long Smooth Steel | Tail: 16in Dia. x 26in Long Smooth Steel | Drive: Electric M...

10in Wide x 9ft Long Conveyor

• Manufacturer: Corbilt

Drive: Nord Gearhead Electric Motor | Voltage: 208-230/460 Volt | Phase: 3-Phase | Speed reducer: Nord Gear Reducer | Ratio: 5.4-1 | Size: 10in Wide x 9ft 3in Long | Head pulley: 9in Diameter x 10in Wide - Rubbe...

24in Wide x 46.5ft Long Channel Conveyor

• Manufacturer: Jeffrey

(15) PROK Idler Sets @ 35° (1) Robins Idler Set @20° Speed Reducer and Chain Drive: Overall Dimensions:

48 in Cleated Belting

(1) 51 ft. long section. 48 in. wide.

International Industrial Blower Size 165

International Industrial Blower 6 In. X 27 In. Double Draw Intake 18 In. X 22 In. Discharge 12 In. Wide X 18 In. Dia Wheel

Chicago SQ High pressure blower

24 inch dia. Housing. 16 inch dia. Wheel. 9 inch inlet. 8 inch x 4 inch discharge. 3 hp belt drive motor. 3500 rpm. 575 Volt

New York 2604 High Pressure Blower

• Manufacturer: Baldor - Reliance

View Spec Sheet Here: Specs Mounted on Base Frames: Blower 1: Blower 2:

AE Fan Equipment 40HP High Pressure Blower

• Manufacturer: AE Fan Equipment

Silencer on Suction End (24in Long x 24in Wide x 24in Deep) Silmark Control Panel Skid Mounted Toshiba H7 Adjustable Speed Control Overall Dimensions:

40,000 CFM Blower

40,000 CFM Blower. 3 groove pulley. Diameter: 43 in. | Blade: 16 in. | Outlet: 14 in. | Inlet: 16 in.

Northern 7900 Series Centrifugal Blower

• Manufacturer: Northern

Size 17 LS WHL 7900 Series. 2 Units available 1 Bare unit 1 on operating platform Less than 300 hours on each. Located on Eastern Canada View Spec Sheet Here: Specs

Allied Blower 222 BI Fan

• Manufacturer: Allied

Top horizontal discharge No motor included Please contact for more information