Used Machine Tools in United Kingdom

1997 FARREL 3D Banbury

• Manufacturer: Farrel

Farrel Bridge 3D Banbury Internal Mixer Machine number 70-M-1326 (rebuilt 1997), mixing chamber capacity: 70.5 litre, Approx capacity 52.7kg hydraulic drop door (cored for heating/cooling) with rotac rotary actua...

Sieve - Siebmachinen & Fordertechnik oscillating screen model ASM 300 built in 2018 but has never

• Manufacturer: Taucha Fördertechnik

Sieve - Siebmachinen & Fordertechnik oscillating screen model ASM 300 built in 2018 but has never been used. This is two deck machine with a single deck area of 3.0M2. The sieve has a 2.2kw drive and the output ...

Shredder - Morbark Mulch Hog HD30, YOM, Ser No and running hours not known. It has a 770mm wide tray

• Manufacturer: Morbark

Shredder - Morbark Mulch Hog HD30, YOM, Ser No and running hours not known. It has a 770mm wide tray feeder feeding the 150kw mill and a 900mm wide twin chain exit conveyor about 9.0 metres long with about 5.0 me...

Cyclone - Cyclone in mild steel, built 2021 and done only 2 seasons work. Built to replace worn

Cyclone - Cyclone in mild steel, built 2021 and done only 2 seasons work. Built to replace worn out unit aspirating milled grass from X26 hammer mill. The cyclone has a top mounted 11kw fan. Maximum body diameter...

Cyclone - Cyclone in mild steel, built 2021 and done only 2 seasons work. Built to replace worn

Cyclone - Cyclone in mild steel, built 2021 and done only 2 seasons work. Built to replace worn out unit aspirating milled grass from X26 hammer mill. The cyclone has a top mounted 11kw fan. Maximum body diameter...

Drum Separator - Hocker Polytechnik foil separating line with rotary separator model PMA-F 120/19/

• Manufacturer: Höcker Polytechnik

Drum Separator - Hocker Polytechnik foil separating line with rotary separator model PMA-F 120/19/3,00-15V with 3kw drive. Drum diameter is 1200mm and length 1900mm. The separator was built in 2009 and can handle...

Magnet - Bakker Magnetics overband magnet model 28.074/01/1 Ser No 28381744 with 2.2kw drive and

Magnet - Bakker Magnetics overband magnet model 28.074/01/1 Ser No 28381744 with 2.2kw drive and belt speed of 1.72 M/sec. 700 mm wide x 2600 mm long. Built 2008. (UCPE 6512) Price - £2,500. Please read the follo...

Drum Separator - Hocker Polytechnik foil separating line with rotary separator model PMA-F 120/19/

• Manufacturer: Höcker Polytechnik

Drum Separator - Hocker Polytechnik foil separating line with rotary separator model PMA-F 120/19/3,00-15V with 3kw drive. Drum diameter is 1200mm and length 1900mm. The separator was built in 2009 and can handle...

Magnet - Bakker Magnetics overband magnet model 28.074/01/1 Ser No 28381744 with 2.2kw drive and

Magnet - Bakker Magnetics overband magnet model 28.074/01/1 Ser No 28381744 with 2.2kw drive and belt speed of 1.72 M/sec. 700 mm wide x 2600 mm long. Built 2008. (UCPE 6512) Price - £2,500. Please read the follo...

Fan- Ceilcote (now Verantis) centrifugal fan with upward inclined outlet and 45kw motor and vee belt

Fan- Ceilcote (now Verantis) centrifugal fan with upward inclined outlet and 45kw motor and vee belt drive. The fan output is 28,588 cfm at 8.54" WG or 48,571M3/hr at 2,125Pa. The fan was built in 1998. 2 remaini...

Conveyor - 2.5 metre long hydraulic log tipping conveyor with 4 x V rollers. (UCPE 6451) Price - £

Conveyor - 2.5 metre long hydraulic log tipping conveyor with 4 x V rollers. (UCPE 6451) Price - £2,500. Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipm...

Brush Sifter - Le Coq 530 brush sifter with 7.5kw motor and 4mm screen. This has been fully

Brush Sifter - Le Coq 530 brush sifter with 7.5kw motor and 4mm screen. This has been fully refurbished. New belts, pulleys, bearings and brushes. Grit blast and paint job. (UCPE 6248) Price - £4180. Please read ...

Tray Feeder - Steel hopper 1.8M x 1.8M x 4.0M high overall with supporting legs and board top. The

Tray Feeder - Steel hopper 1.8M x 1.8M x 4.0M high overall with supporting legs and board top. The hopper has an open outlet 800mm long x 400mm wide which is 1650mm above base level. A Triton TF4S vibrating tray ...

Storage Hopper – Hopper with tapered screw dischargers on the outlet. The hopper is 3.2M long x 2.7M

Storage Hopper – Hopper with tapered screw dischargers on the outlet. The hopper is 3.2M long x 2.7M wide x 5.1M high with an offset outlet 2.5M long x 300mm wide 1.27M above floor level. The total hopper volume ...

Mori Seiki NMV-3000DCG Machining Center

• Manufacturer: Mori Seiki
• Model: NMV-3000DCG

Good condition Mori Seiki NMV-3000DCG Machining Centers manufactured in 2009. Located in USA and other countries. Click request price for more information.