Used Evaporators

Wiped/Thin Film Evaporator Stainless Steel 316 - IPP# 70252

• Manufacturer: Luwa

3 sections jacket rated by 10bar @ 200 degrees C ( total volume 150liter).

Evaporator Rising/Falling Film Two Effect Stainless Steel 304 - IPP# 216076

double effect evaporation system. See video of system operating at Capacity based on a brine stream at 24% to 50% strength. Feedstock of 32,000 lbs/hr(normal operating) or up to 50,000 lbs./hr. brine at ~ 20-25% ...

Hastelloy - C22 Clad Wiped/Thin Film Evaporator - IPP# 220954

• Manufacturer: SMS Buss

with 316 SS rotor, Jacket rated for 218 psi at 482 degrees F. Heating surface area 150.7 Sq. Ft., Serial numbers: Lower Body Serial Number 1400/56, National Board Number 717; Interm body Serial Number 1400/56, Na...

Stainless Steel 321 Buhler OTW-500 Crystallizer/Evaporator Plastic - IPP# 219971

• Manufacturer: Bühler

Vibrating fluid bed with enclosed chamber rated pe=60 mbar total pressure drop, ca.30 mbar differential pressure ca 2 mbar design pressure pe=90 mbar @ 200 deg C, 400 deg C product thickness ca.200mm Openings inc...

Stainless Steel 316L Pfaudler Wiped/Thin Film Evaporator - IPP# 233717

• Manufacturer: Pfaudler

wiped film evaporator system. Jacket rated for 160 psi at 650 degrees F. Drive system by Pfaudler, 3 DTW With 158 Sq.Ft. external condenser, 316 SS tubes 316 SS tube sheet 316 SS heads CS shell NB # 43399 Shell s...

Stainless Steel 316 Rodney Hunt Wiped/Thin Film Evaporator - IPP# 116939

• Manufacturer: Rodney Hunt

Turbo-film evaporator CS jacket jacket rated 150 psi @ 400 degree F. with 16" cone bottom. Unit driven by 15 HP, 3/6/440 volt, 1760 rpm motor. Rotor speed 690 rpm. Includes:134 Sq Ft, 10" diameter x 8' long 304 S...

Rising/Falling Film Evaporator APV Three Effect Stainless Steel 316 - IPP# 215278

• Manufacturer: APV

98.6% water evaporation 4-effect falling film evaporator system Designed by Fritz Voltz sohn feed rate 3.4m3/hr, product 1.3 m3/hr Feed to 1st evaporator is 3.4 m3/hr @ 34.8% concentration and @ 104 deg C vacuum ...

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O

• Manufacturer: Organomation

Organomation Associates 12 position N-Evap unheated nitrogen evaporator, N-Evap-111, Cat. No. 11155-O is a reliable solution for efficient nitrogen evaporation in the lab. This model is ideal for laboratories nee...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215307

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215302

• Manufacturer: Luwa

wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts, 323.9mm ID x 8450mm long x 7mm thick shell carbon steel jacket 368mm diameter x 8410mm lon...

Biotage Turbovap LV Evaporator, P/N 416200

• Manufacturer: Biotage

The Biotage Turbovap LV Evaporator, P/N 416200 is a top choice for laboratories needing efficient solvent evaporation solutions. This evaporator streamlines sample preparation processes, saving valuable time and ...

Stainless Steel 321 Buhler Group OTW-890 Crystallizer/Evaporator Plastic - IPP# 219978

• Manufacturer: Bühler

used on PET pellets fluid bed crystallizer product weight 720-820 kg/m3, granule density 1340 kg/m3, viscosity of granule 830 (SV)

Stainless Steel Austenitic Clad Luwa SMS Wiped/Thin Film Evaporator - IPP# 215303

• Manufacturer: Luwa

jacketed horizontal wiped film evaporator/crystalliser jacket 6 bar @ 100 degrees C (130 liter), 316Ti (1.4571) stainless steel wetted parts 323.9mm ID x 8450mm long x 7mm thick carbon steel jacket 368mm diameter...

Stainless Steel 316 Luwa SMS Wiped/Thin Film Evaporator - IPP# 88542

• Manufacturer: Luwa

Rated vac int. Upper jkt rated 257 psi (17.5 Kg/cm2) @ 208 deg C, lower jkt rated 205 psi (14 Kg/cm2) @ 298 deg C. 10" btm cone, 8" dia x 24" long entrainment section No motor, unit is setup for belt drive No stand.