Used Husky Processing

2002 Husky GL 300 72-cavity PET Preform Injection Moulding system

• Manufacturer: Husky
• Model: GL 300

Husky GL 300 72-cavity PET Preform Injection Moulding system, year 2002 Working hours: 98,046 hrs (October 2023) Consisting of: * Husky GL300 P100/110 E120 PET Preform Injection Moulding machine (2002) * Husk...

2003 Husky GL 300 56-Cavity PET Preform Injection Moulding system

• Manufacturer: Husky
• Model: GL 300

Husky GL 300 56-Cavity PET Preform Injection Moulding system, year 2003 Working hours: approx. 160,000 hrs. Includes: * Husky GL300 PET P100/110 E120 injection moulding machine * Husky 3-stage outtake robot * P...

2015 Husky HPETL230E-RSE95D-95

• Manufacturer: Husky

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully el...

2006 HUSKY H400 RS65/60

• Manufacturer: Husky

Husky 3.2HP air compressor, 11.8 @40 PSI SCFM

• Manufacturer: Husky

1-Used husky model vt631403aj air compressor, serial number l7/14/09-00401. Scfm rating 11.8 at 40psi and 10.3 at 90psi. This 60 gallon unit has 3.2 hp motor. (stock#7870g)

Husky 4HP 80 Gallon Compressors

• Manufacturer: Husky
• Model: HS781003AJ

Husky Compressors (2 available) Model HS781003AJ - 4 HP | 80 Gallon - 240V | 60 Hz | 1PH - 12.2 @ 175 PSI - 12.6 @ 90 PSI - 175 PSI max

Husky Pro Air Compressor 7 HP

• Manufacturer: Husky

Husky Pro 60 Gallon Vertical Air Compressor – 7 HP Cast-Iron Pump The Husky Pro VT631302AJ is a space-saving vertical air compressor designed for reliable power and efficiency in workshops or garages. With a dur...

2023 Husky HPP5e 96 cavity 46.5gm PCO1881 Preform Mould

• Manufacturer: Husky

Husky HPP 5e 96 cavity 46.5gm PCO1881 Preform Mould Cold Half, year 2023 Only used for approx 240,000 shots! Preform drawing available upon request. Cycle time: 16.3 sec Was made to work on a Husky HPP5e HyPE...

2010 Husky HyPET 120 PET Preform Injection Moulding system

• Manufacturer: Husky

Husky HyPET 120 PET Preform Injection Moulding system, year 2010 Power on Time : 71,455 hours (Actual run-time wil be much less as customer had frequent mould changes). Equipment is in very good working conditi...

2003 Husky H90 PCO1810 Closure Injection system

• Manufacturer: Husky
• Model: H90

Available is a Husky H90 PCO1810 Closure Injection system, year 2003 – composed of: * Husky H90 RS 45/42 Injection moulding machine – Distance between Tiebars : 450 X 450 mm – Injection Capacity : 291 Cu.Cm – Ma...

2015 Husky 20L PET Preform Injection Mould

• Manufacturer: Husky

Husky 8 cavity 20L PET Preform Injection Mould, manufactured June 2015 HyPET standard with 3.6 gen. Hot Runner Cavities : 8 Pitch : 140 x 240 Preform weight : 675 gm Neck type : Snap-on as well as Threaded neck ...