Used Cnc Lathes in Lombardy, Italy

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Round: 14 mm - Square: 10 mm - Hexagonal: 12 mm Max feed length: 75 mm. Spindle: Number of speeds: 16 - Spindle revolutions: 900-6000 rpm. - Production cycles: no. 22 Production c...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Max feed length: 75 mm. umber of speeds: 16 - RPM: 900-6000 rpm - Production cycles: 22 Production cycle range: pieces per minute 4.9 to 72 - seconds per piece 12.2 to 0.84. No. 6...

L. PONTIGGIA 3 QG 750x15500 THREE SLIDES BED CNC LATHE

• Manufacturer: Pontiggia Leopoldo

Complete with: - n. 1 four jaws table Ø 1.200 mm. - n. 1 automatic square turret - n. 1 closed steady - n. 4 open steadies - n. 1 boring support

HARDINGE CONQUEST T42L motorized 3-axis cnc lathe

• Manufacturer: Hardinge
• Model: Conquest T42

Used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe The used HARDINGE CONQUEST T42L motorized 3-axis cnc lathe is a rugged and precise CNC lathe with an inclined bed of medium size, turning length about 700mm,...

1986 STAR MOD. cnc lathe JNC 16

Automatic cnc sliding headstock lathe Turrets: Diameter: 16 mm. Max bar feed: 160 mm. Max bar feed with synchronized sleeve: 95 mm. Spindle speeds: 375 - 7,500 rpm. Drive motor power: Devices and Accessories: Acc...

GILDEMEISTER NEF 710 x 3000 CNC LATHE

• Manufacturer: Gildemeister
• Model: NEF 710

Retrofitted in 2008. Complete with: - n. 1 four jaws table Ø 610 mm. - n. 1 self centering chuck Ø 315 mm. - n. 2 closed steadies - n. 1 open steady - chipconveyor

2008 YU SHINE YS VL 1200 ATC

• Manufacturer: YU SHINE

Type: CNC MOTORIZED VERTICAL LATHE | Conditions: Used | Status: Good | Type of control: Fanuc 0i-TC | Table diameter: Ø 1.250 mm | Max. load on table: 5.000 Kg | Max. swing diameter: Ø 1.600 mm | Max. turning di...

MORI SEIKI SL 2500 Y-axis motorized CNC lathe

• Manufacturer: Mori Seiki

Used MORI SEIKI SL 2500 Y Y-axis motorized CNC lathe The used MORI SEIKI SL 2500 Y Y-axis motorized CNC lathe is a fast, medium-sized, tilt-bed CNC lathe equipped with a tailstock, a C-axis electric spindle, and ...

SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe

• Manufacturer: Spinner

Used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe The used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe is a robust CNC tilting bed lathe with ASA 8″ size flat guideways, with BARU...

2000 BIGLIA B 501 YS motorized counter-spindle CNC lathe

• Manufacturer: Biglia
• Model: B 501 YS

Used BIGLIA B 501 YS Sub-Spindle Motorized CNC Lathe The used BIGLIA B 501 YS sub-spindle motorized CNC lathe is a fast, small-to-medium sized, tilt-bed CNC lathe with an ASA 8" main spindle with a "C" axis, a FA...

1998 CITIZEN CINCOM E32 sliding headstock lathe

• Manufacturer: Citizen
• Model: E32

Automatic sliding headstock lathe Bar passage: 32 mm. Max bar feed: 320 mm Max drilling/tapping: Ø 16mm/M12. Spindle speed: 130 to 6000 rpm. Main tool turret: 12 positions Secondary tool turret: 12 positions Moto...

2001 TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader

• Manufacturer: Takamaz

Used TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader The used TAKAMAZ X20 HI SERVER 2-axis cnc lathe with gantry loader is a fast CNC lathe with inclined shooting bench, 2 medium-sized axes with tailsto...

LATHE BIGLIA B565YS

• Manufacturer: Biglia
• Model: B 565

MAIN SPINDLE MAX. BAR DIAMETER: 70 MM MAX. TURNING DIAMETER: 290 MM MAX. TURNING LENGTH: 560 MM SPINDLE NOSE: A2-6 SPINDLE POWER: 11KW SPINDLE SPEED: 40-4000 RPM C AXIS: 360° INC. INDEXING 0.001° TURRET NUMBER OF...

2005 HANKOOK VTC 85

• Manufacturer: Hankook
• Model: VTC 85

Type: CNC VERTICAL LATHE | Condition : Used | Status: Good | Control type: FANUC 21i-TB | Max. swing over bed: Ø 1,000 mm | Max turning diameter : Ø 850 mm | Max. turning length: 850 mm | X axis travel: 480 mm ...

2011 TSUGAMI HS32

• Manufacturer: Tsugami

Type: SWISS TYPE CNC LATHE | Condition: Used | Status: Very good | Type of control: Fanuc 31i-A | S1/s2 spindle speed: 8.000 rpm | N. of axis: 6 | Weight: 3.400 Kg | Max bar passage: Ø 32 mm | Bar feeder: Iemca ...