Used Material Handling in Flanders, Belgium

HOLZ-HER 1117 Feeder

• used

• Manufacturer: Holz-Her

Complete with stand. Throughput: 5/10/15/20 m / min. 3 rubber feed rollers Motor: 0,55/0,75 kW. Year of construction:

2001 SAULUS Feeder

• used

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermedi...

1993 BIRONCAR Feeder / Stacker

• used

hydraulic scissor lift dimensions of the table: 3 x 1,3 m height min/max: ca. 0,5 m / 1,6 m max load 2 tons Pusher with panel thickness adjustment up to 10 cm Feeding height: approx. 1,10 m. Stroke approx. 2,8 m.

MAGIK MAGIK48 Feeder

• used

Complete with tripod and base. 4 rubber feed rollers Motor power: 0.75 kW Machine number: Year of construction:

ORMA MACCHINE - Feeder / Stacker

• used

• Manufacturer: Orma

Stacker behind press Useful width: 2,55 m. Length: 2,70 m. Height: ca. 90 cm Hydraulic ramp Panel feed by 13 parallel driven belts electrical cabinet not included Machine number: Year of construction: Tension:

2006 FAMATEC Adiutor 1500 Vacuum lifting device

• used

• Manufacturer: Famatec

Maximum load capacity: 60 kg Maximum plate width: 1200 mm Maximum reach: 3.4 m Vertical stroke: 1.7 m

2023 METAL SUD VENTOSA MVLA... Vacuum lifting device

• used

vacuum lifting max.200 kg arm range: 5 m 4 vacuum cups 200 x 200 mm Height needed: 3500 mm. Electrical winch

2002 GABBIANI TR 100 Panel turning device

• used

• Manufacturer: Gabbiani

In line 90° panel turning device Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported o...

1992 HACKEMACK KTR 3120 Panel- and stackrotating device

• used

• Manufacturer: Hackemack

In line panel rotator Max. panel sizes: 5200 x 1350 mm Max. panel thickness: 60 mm Working height: ca. 900 mm 6 cycles/min

1991 HITACHI/ANVERRA DT 200 Vacuum lifting device

• used

• Manufacturer: Hitachi

vacuum lifting max.200 kg arm range: 5m 6 vacuum cups diameter 245 mm Height needed: 4650 mm. Electrical winch Tilting frame Tension:

2002 GABBIANI TR 001 Panel turning device

• used

• Manufacturer: Gabbiani

In line 90° panel turning device Panels entering crosswise, turning them to lengthwise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported o...

2002 GABBIANI TR 100 Panel turning device

• used

• Manufacturer: Gabbiani

In line 90° panel turning device (or transport crosswise without turning) Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 m...

2009 TILTECH TILWOOD Vacuum lifting device

• used

Vacuum lifting system with frame for X - Y movement Lifting system with 4 suction cups, frame 1.2 x 0.8 m. Max. load 120 kg. via pneumatic hoist Bal-Trol Stroke in Y via double guideway: 30 m. Stroke in X: 6 m.

2019 ELEKTRISCHE STAPELAAR CL1535J Panel- and stackrotating device

• used

Rated capacity: 1500kg Service weight: 510kg Lift height: 3500mm Load center: 600mm Weight without battery: 450kg Allowed battery weight: 60kg

Cart - Movexx T1000 Cleanroom - DK126

• used

• Manufacturer: Movexx