Used Material Handling in Saxony, Germany

2000 Bürkle AS-WO-S

• Manufacturer: Bürkle

Table size approx. 3360 x 1850 mm Sliding belt length approx. 5000 mm Automation technology conveyor table: Sliding table from a wooden door production line Conveyor technology: Used electric pneumatic transverse...

Trough chain conveyor #23778

with gearbox (suitable motors in stock) used very stable trough chain conveyor TKF Reedler 11,8 meter was used for coal, can also be used for other products grain sand etc. capacity up to 300 to /H possible with ...

Trough chain conveyor #23777

with drive motor/gearmotor SEW Eurodrive used very stable trough chain conveyor 13,5 meter heatable was used for coal 1380/3,4 rpm kW 0,55 / Nm 1800 230/400 V ; 3,05/1,75 A ; 50 Hz -This trough chain conveyor is ...

3x roller tables roller table 6250 mm #B12388

1x length approx. 2250 mm 2x length approx. 2000 mm Conveyor width approx. 530 mm roller tables roller table roller table not driven roller table roller table used 3 pieces frame width approx. 650 mm frame height...

Honert T250

• Manufacturer: Honert

progressive thread solid trough screw, screw conveyor used without drive motor, but can be offered with, also overhaul. Changes and errors in the technical data, specifications and prices as well as prior sale re...

Chip conveyor Wire conveyor Scraper conveyor Apron conveyor 1,3 + 0,8 + 0,6m with coolant pump #B11809

lower belt length approx. 1300 mm pitch approx. 800 mm upper belt length approx. 600 mm chip conveyor plate conveyor with liquid tray used ejection height approx. 800 mm belt width 140 mm with pump and gear motor...

massive TKF trough chain conveyor Redler heatable coolable 6,7m 1 to 250 to/H #27651

Trough width inside approx. 450 mm Trough depth inside approx. 400 mm distance between flights 280 mm The trough chain conveyor is offered tested and newly primed. center inlet - center outlet approx. 5100 mm dis...

Trough chain conveyor 60-80 t/H #B11096

Lengths from 5 to 50 meters Inside width approx. 280 mm inner height approx. 400 mm Trough chain conveyor approx. 60-80 to/h used trough lengths from 5 to 50 meters possible trough inner width approx. 280 mm inne...

Günzburger Steigtechnik stationary crossing

• Manufacturer: GÜNZBURGER ACCESS TECHNOLOGY

Stationary transition, stationary step-over GÜNZBURGER ACCESS TECHNOLOGY 3720 x 960 x 2310 mm handrail installed on both sides with knee rail, height: 1100 mm aluminum grooved used, tested ! Dimensions ( assemble...

EUROLINE stationary transition

• Manufacturer: Pagus

Stationary transition, stationary step-over EUROLINE 512 Size 6 5126306 DIN EN ISO 14122 Handrail installed on both sides with knee rail, height: 1100 mm aluminum grooved used, tested ! Dimensions ( assembled, le...

STEINERT Lifting magnet

• Manufacturer: Steinert

Lifting magnet, electric lifting magnet, battery lifting magnet STEINERT ELECTROMAGNET CONSTRUCTION SBM24 used, tested !

JUNGHEINRICH drum gripper

• Manufacturer: Jungheinrich

Drum gripper , hot-dip galvanized JUNGHEINRICH for picking up one or two rolling hoop or beaded drums or plastic L-ring drums used, tested !

PAGUS solid rubber wheel

• Manufacturer: Pagus

Solid rubber wheel, with rim, 5 pieces PAGUS СККИ-ЗЕБРА 2x 630 - 220 - 480 Rim diameter: Ø 480 mm, rim width: 220 mm Bolt circle diameter: Ø 275 mm, 8x bore: Ø 27.5 mm 3x 630 - 200 - 480 Rim diameter: Ø 480 mm, r...

PAGUS Lifting magnet

• Manufacturer: Pagus

Lifting magnet, permanent lifting magnet PAGUS used, tested !

VEM Lifting magnet

• Manufacturer: VEM

Lifting magnet, lifting magnet VEM LB 3 x 8 ( LB3x8 ) TGL 10273 220 V DC voltage used, tested !