Used Processing in Slovakia

RESERVED: WOOJIN SELEX NE280 Injection Molding Machine (2006 )
- Manufacturer: WOOJIN SELEX
- Clamping force 280 ton - Distance between tie bars 610x610 mm - Platen Size HxV 900x900 - Clamp stroke: 570 mm - Max open stroke: 1220mm - Mould height min/max: 250/650mm - Screw dia :55 mm - Injection Pressure...
Slovakia
1991 Engel ES 330/65
- Manufacturer: Engel
- Model: ES 33065
Clamping force 65 ton Screw diameter 35 mm Weight 4000 kg L x W x H: 4300 mm x 1600 mm x 2000 mm documentation fully funtional machine, is not under power tie bars was working until 7 CW/2023
Slovakia
RESERVED: Arburg 420 C 1000-350 (2001)
- Manufacturer: Arburg
- Model: 420 C 1000-350
Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 40 mm Injection volume: 182 cm3 Shot weight: 153 g Working hours: 77.000 L x W x H 4700 x 1600 x...
Slovakia
1996 Arburg Allrounder 320 M 500 - 90, 50 t, missing system card
- Manufacturer: Arburg
NEGOTIABLE PRICE! Is sold in condion as is - Card: system missing Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control...
Slovakia
RESERVED: 1998 Arburg Allrounder 320 M 500 - 210, 50 t
- Manufacturer: Arburg
NEGOTIABLE PRICE! Clamping force 50 t Srew 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 101 ccm Control Multronica Core pullers - no Hotrunner zones ...
Slovakia
RESERVED (2008) Ferromatik MM 1000-6610 ,Screw: 90 mm
- Manufacturer: Ferromatik
MM 1000-6610 Ferromatik Clamping force: 1000 tons Screw diameter: 90 mm Injection pressure: 2300 bar Injection volume 2799 cm3 Injection shot: 2407 g Plattens dimensions: 2000 x 1605 mm Distance between ti...
Slovakia
2004 MTA Italy TAE402 Chiller
- Manufacturer: MTA
- Model: TAE
It was used as a cooling backup. Not under power Currently, 1 out of 4 compressors on the device is damaged. It has no effect on operation. That is, except for the reduced cold. power. It cooled approximately ...
Slovakia
RESERVED: Arburg 320C 600-250U (2001) Vertical / horizontal
- Manufacturer: Arburg
- Model: 320 C
Clamping force: 60 tons Distance between tie bars: 320 x 320 mm Clamping plates dimensions: 446 x 446 mm Mold Height min. / max. : 200 x 550 mm Max oppening: 350 mm Ejector path: 125 mm Screw diameter: 35 m...
Slovakia
(2011) Wittmann Battenfeld EcoPower 110/130 UNILOG B6, Electric machine
- Manufacturer: Battenfeld
Wittmann Battenfeld EcoPower 110/130 UNILOG B6 - clamping force 110 tons - screw diameter 25 mm - weight of the molding max 55.8 gPS - dimensions between guide columns 470x470 mm - min. tool height 200 mm - max....
Slovakia
RESERVED: 2012 Arburg Allrounder 375 V 500-290 Vertical Injection Molding Machine
- Manufacturer: Arburg
- Model: Allrounder
26835 motohours clamping force 50 ton screw diameter 30 mm closing pistons type of oil Optima 32ZP volume of liters 120 screw type % glass: PK-V 30%, type of srew D30 L=978 weight of molding max 92 g PS d...
Slovakia
2007 WOOJIN SELEX NS 110
- Manufacturer: WOOJIN SELEX
clamping force 110 tons screw diameter 30 mm AK glass + 30% weight of molding max 120 gPS dimensions between guide columns 410x410 mm min. tool height 150 mm max. tool height 400 mm closing the joint weig...
Slovakia
1995 Engel ES 1050/175 HL
- Manufacturer: Engel
- Model: ES 1050175 HL
srew dia 55 mm clamping force 175 t HxV 820x520 mm HxV 820x750 mm weight 11500 kg
Slovakia
Hydraulic clamping system PASCAL
- Manufacturer: Pascal Japan
Hydraulic clamping system PASCAL Force: 160kN Manufacturer: Pascal corp. , made in Japan
Slovakia
2007 GETECHA GRS 300 - A2.11 Mill - Granulator
- Manufacturer: Getecha
- Model: GRS300
- Noise level: 85 dB
Condition: very litle used, very good condition, year of made 11/2007
Slovakia
Demag EL-EXIS S 100/420-310 hybrid (year 2005)
- Manufacturer: Demag
Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamp...
Slovakia
Arburg Allrounder 420 Injection Molding
- Manufacturer: Arburg
- Model: Allrounder 420
Good condition Arburg Allrounder 420 Injection Moldings available between 1995 and 2010 years. Located in Slovakia and other countries. Click request price for more information.
Slovakia