Used Processing in Florida, USA

Hartnett Delta Tablet Printer

• Manufacturer: Delta

One (1) used Hartnett Delta tablet printer. Capable of two color & axial printing, production rate 60-240k units per hour. Tablet diameters minimum 3mm to maximum 19mm. Tablet thickness minimum 3mm maximum 25mm. ...

Niro MP1 Fluid Bed Dryer Granulator

One (1) used Niro Model MP1 Fluid Bed Dryer Granulator. stainless steel construction, 10 bar internal shock pressure with misc chambers, air handling, blower and controls, serial# 05305-1310, built 2005.

Acasi Piston Filler- TruPiston -2-SH

New Acasi Piston Filler- Model TruPiston Model-2-SH Construction features: Pneumatic driven with independent adjustment for each piston. Capable of handling breakable particles up to ¾ in diameter. Reservoir tank...

Belco L Bar Sealer, STC-2520

• Manufacturer: Belco

One (1) used Belco L Bar Sealer, Model STC-2520. This unit features welded tubular steel frame, impulse and constant heat sealing, sealing wire sensor to prevent overheating, adjustable tilt table/conveyor, digit...

GEA/Aeromatic MP-Micro Fluid Bed Dryer

• Manufacturer: GEA

One (1) used Aeromatic Fielder lab fluid bed dryer/ granulator, Model MP-Micro, bench top design, stainless steel enclosure with spray granulation with wurster chamber, electrically heated, 110 volt with controls...

Rotary Vacuum Dryer 150CFT Bush Tank Fab Rotary Vacuum Dryer

One (1) used 150 cu ft Bush tank fab rotary vacuum dryer, 304 stainless steel construction, 4' diameter x 16' long drum, rated full vacuum, internal jacket rated 15 PSI, 5" shaft, packing glands on stands with 30...

Rotary Vacuum 141 CFT Buss Rotary Vacuum Dryer

• Manufacturer: Buss

ONE (1) Used Buss Rotary Vacuum Dryer, 141 cu. ft. working capacity, 304 stainless steel construction, 5' diameter x 12' long rated full vacuum internal, cored paddle and shaft agitator rated 5 Kg/centimeters squ...

Shanklin " L" Bar Sealer S-4C

• Manufacturer: Shanklin

One (1) used Shanklin " L" Bar Sealer, Model S-4C. Sealing area 22" X 33", 220 Volts, 20 Amps, 1 Phase, air 60 (P.S.I.), Serial# S-7937

Battenfeld BK850/200 85 Ton Horizontal Injection Molder

• Manufacturer: Battenfeld

One (1) used Battenfeld Model BK850/200 85 Ton Horizontal Injection Molder. This unit features a maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", complete with Unilog 4000 controller.

Mini-Glatt 4 Fluid Bed System With Wurster

• Manufacturer: Glatt

One (1) used Mini-Glatt 4 Fluid Bed System. This unit features stainless steel construction, rated 3.3 bar internal shock rating, with Wurster insert, CE and ATEX rated.Year built 2004.

Beseler L Bar Sealer

• Manufacturer: Beseler

One (1) used Beseler L Bar Sealer, Model# 2016-MB-SL. Sealing area 14" X 18", 115 Volts, 1 Phase, 60 Hertz, Serial# 01097781

Fluid Air 0005

• Manufacturer: Fluid Air

Fluid Air Model 0005 Fluif bed dryer with explosion proof enclosure design, 208/230V, 3PH, Unit is base only, missing all inserts in chamber.

J.C.Pardo & Sons 500 Gal Vacuum/Jacketed Mixing Tank

One (1) used J.C.Pardo & Sons 500 Gal Vacuum/Jacketed mixing tank. Vessel rated for 15 Psi @ 287 Deg F or Full Vacuum, jacket rated for 40 PSI at 287 Deg F., 5 h.p. Reeves variable speed drive rated output from 1...

Aeromatic Strea1 Lab Fluid Bed Dryer

One (1) used Aeromatic Fluid Bed Dryer Model STREA-1. Dryer features stainless steel chamber, 2 kg capacity, 16.5 liter chamber volume, with heater and controls, 125 volt.

Luwa Thin Film Evaporator

• Manufacturer: Luwa

One (1) u sed 1.4 sq. ft. Luwa/Buss Pilot Plant Thin Film Evaporator, stainless steel construction, Model LN-0012, 4.7 liter chamber volume, rated full vacuum internal at 482 degrees F, jacketed for 290 PSI at 48...