Used Processing in Piedmont, Italy

ARBURG - ALLROUNDER ALLDRIVE 320A 500-170 - Plastic injection molding machine - 2008

• Manufacturer: Arburg
• Model: Allrounder 320

Clamping Force: 50 Ton Holding force: 50 Ton Maximum opening stroke not detected Minimum mold height not detected Plate spacing Not detected plate size: 450 × 450 mm Distance between columns: approx. 370×370mm Ma...

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mold height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm Maximum w...

DEMAG - INTELECT 100/420-310 - Plastic injection molding machine - 2004

• Manufacturer: Demag
• Model: Intelect 100/420-310

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mold height: 200 mm Maximum mold height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between column...

HTST PLATE PASTEURIZER for liquid products

• Manufacturer: TAS Impianti

PLATE PASTEURIZER FOR LIQUID PRODUCTS HTST pasteurizer with plate heat exchanger for continuous pasteurization of liquid products. The machine allows the pasteurization of liquid food products such as milk, beer,...

TAS Impianti Hot Air Dryer - Our "ES12" model

• Manufacturer: TAS

Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

TAS Impianti Hot Air Dryer - Our "ES12" model

• Manufacturer: TAS

Hot air dryer - Ns. mod. "ES12" The machine was conceived, designed and manufactured with the aim of reducing moisture in granular food products. Entirely made of aisi 304 stainless steel for product contact part...

INGERSOLL RAND - RSE90N-A13 - Screw Compressor - 2022

• Manufacturer: Ingersoll Rand

Volume flow: 18.16 mc/min Operating pressure: 13 bar Suction pressure: 1 bar Speed: 2200rpm Approximate dimensions: 2500 x 1400 x 2200 mm Warning: the information reported has been taken on board the machine usin...

FULLSTRAP - FULLSTRETCH - Parcel packer

Machine dimensions: approx. 2700x1800x2100mm Maximum packing height: approx. 1800mm Base diameter: approx. 1650mm Warning: the information reported has been taken on board the machine using measuring instruments ...

CSC - 3000 l tank - 2019

Approximate dimensions: D1200 x 2500 mm Consider at least 1400 mm of lateral clearance due to flanges and valves. Capacity: 3000 litres Pressure: 12 bar Warning: the information reported has been taken on board t...

6000x3000 N.3 Cast iron surface plate

• Manufacturer: 6000x3000

N.15 support points Leveling from above Technical details: 6000 x 3000 x 100 mm | Weight: 5700 Kg x 1 | Overall dimensions: 6000 x 3000 x 100 mm

4950x1500 Cast iron surface plate

• Manufacturer: 4950x1500

N.8 support and levelling columns - N.10 support points Leveling from above - N.3 T slots 12 mm - T slots distance 700 mm - N.1 U marking line 35 x 20 mm

TORTI SALGEMMO Swarf conveyor

• Manufacturer: TORTI SALGEMMO

1990 GAMUT Swarf conveyor

• Manufacturer: GAMUT

Swarf conveyor with tank and coolant filter