Blansko, Czech Republic
1990 Kovofiniš OVO 150
- Manufacturer: Kovofiniš
max. working pressure of 0.7 MPa max. working temperature 40 ° C min. Operating temperature 0 ° C volume of 53 l
Blansko, Czech Republic
AGRE GE 7.5
- Manufacturer: AGRE
Performance knocked 0.73 m3 / min. The working pressure of 10 bar Installed power 5.5 kW 400V Frequency 50 Hz Weight 375 kg
Blansko, Czech Republic
Schneider druckluft AM 75.10 D
- Manufacturer: Schneider
flow of 10500 l / min compression pressure 10 bar maximum operating speed 2960 / min installed engine power - 75 kW - 400 Volts - 50 Hz
Blansko, Czech Republic
1990 TOS Čelákovice 2 JSK 75-22
- Manufacturer: TOS
container volume 500 L maximum pressure of 0.98 MPa, maximum temperature of 200 ° C machine weight 60kg
Blansko, Czech Republic
SOLLAU DND-MC E-fficient
- Manufacturer: Sollau
Max. suspension height: 1000 mm Electrical connection: 415 V (also suitable for voltages of 400 and 380 V) Magnet power supply: from 0.6 to 12 kW Max. conveyor belt speed: 5 m / s Max. conveyor belt width: 2000 m...
Velký Ořechov, Czech Republic
SOLLAU DND-MC E-xtreme
- Manufacturer: Sollau
Max. suspension height: 1000 mm Electrical connection: 415 V (also suitable for voltages of 400 and 380 V) Magnet power supply: from 1 to 34 kW Max. conveyor belt speed: 5 m / s Max. conveyor belt width: 2000 mm ...
Velký Ořechov, Czech Republic
SOLLAU DND-MC Mx F
- Manufacturer: Sollau
Installation height up to 450 mm Capture of ferromagnetic particles larger than 1 mm This is the strongest series of magnetic separators from SOLLAU. The magnetic induction of these devices is at the limit of the...
Velký Ořechov, Czech Republic
SOLLAU DND-MC Mp F
- Manufacturer: Sollau
Installation height up to 340 mm Wider version specially designed for applications above spillway Capture of ferromagnetic particles larger than 1 mm It is a series intended for installation up to a height of 340...
Velký Ořechov, Czech Republic
SOLLAU DND-MC Nm
- Manufacturer: Sollau
Installation height up to 250 mm Capture of ferromagnetic particles larger than 0.5 mm This is the strongest neodymium series especially for mobile applications where extremely high separator efficiency is requir...
Velký Ořechov, Czech Republic
SOLLAU DND-MC Ms F
- Manufacturer: Sollau
Installation height up to 320 mm Capture of ferromagnetic particles larger than 1 mm This series is intended for demanding users who expect high performance from the separator even at greater depths. The maximum ...
Velký Ořechov, Czech Republic
SOLLAU MSP-AC EKO V4BARRACUDA
- Manufacturer: Sollau
Separator including valves and flaps Fully automatic design Connection diameter 20 to 150 mm Control panel with display Pneumatically cleaned four-valve version. The material flows through the inlet pipe to the s...
Velký Ořechov, Czech Republic
SOLLAU DND-MC E-conomic
- Manufacturer: Sollau
Ideal for application in mobile crushing and recycling lines Power / weight ratio: the strongest magnetic field in relation to the weight of the separator Low weight Low stop height Compact design Attractive pric...
Velký Ořechov, Czech Republic
SOLLAU DND-MC Mm F
- Manufacturer: Sollau
Installation height up to 400 mm Capture of ferromagnetic particles larger than 1 mm These separators are intended for very demanding applications at greater depths (up to 400 mm).
Velký Ořechov, Czech Republic
SOLLAU DND-MC Ns
- Manufacturer: Sollau
Installation height up to 220 mm Capture of ferromagnetic particles larger than 0.5 mm Stronger neodymium variants for installation up to a height of max. 220 mm, intended for medium-demanding applications. Its a...
Velký Ořechov, Czech Republic
Atlas-Copco GA 5 Industrial Compressor
- Manufacturer: Atlas-Copco
- Model: GA 5
Good condition Atlas-Copco GA 5 Industrial Compressors available between 2000 and 2006 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword