Used Presses in Germany

Trusted Seller
2005 Komatsu E2G 400
- Manufacturer: Komatsu
- Model: E2G400
- Stroke length: 500 mm
- Daylight: 1,250 mm
2 cushion cylinder 2 pads moving bolster left to right 2 moving bolster
Gammertingen, Germany
Trusted Seller
Komatsu 500 QP - 5125
- Manufacturer: Komatsu
- Stroke length: 500 mm
- Daylight: 1,350 mm
2 cushion cylinder 1 pad moving bolster right to left
Gammertingen, Germany
Trusted Seller
1974 SCHULER E4-600-3.3-762
- Manufacturer: Schuler
- Stroke length: 762 mm
- Shut height: 1,322 mm
With moving bolster front to back Pressure total: 600 ton | Ram stroke: 762 mm | Slide adjustment: 406 mm | Shut height (stroke down, adjustment up): 1322 mm | Free frontal opening l-r: 3700 mm | Free lateral ope...
Gammertingen, Germany
Trusted Seller
1997 KAISER V 315 WR 2740
- Manufacturer: Kaiser
- Model: V 315 WR 2740
- Stroke length: 160 mm
- Shut height: 1,050 mm
hydraulic tool clamping device Tool changing cart Pressure total: 315 ton | Ram stroke: 160 mm | Slide adjustment: 100 mm | Shut height (stroke down, adjustment up): 1.050 mm | Free frontal opening l-r: 2.740 mm ...
Gammertingen, Germany
Trusted Seller
2002 KUHNE MASCHINENBAU KEPK-1
- Manufacturer: Kuhne
Orbital Cold Forming Machine! - Not not suitable for screw production!!!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precisio...
Leipzig, Germany
Trusted Seller
Polam PZPE Kostuchna PH 6 AL
- Manufacturer: Polam PZPE Kostuchna
- Stroke length: 20 mm
pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length...
Leipzig, Germany
Trusted Seller
2022 Rodcraft WP30P
- Manufacturer: Rodcraft
- Stroke length: 142.5 mm
Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./...
Leipzig, Germany
Trusted Seller
LEINHAAS DWP 63 CN
- Manufacturer: LEINHAAS
- Power requirement: 11 kW
DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D.
Leipzig, Germany
Trusted Seller
1985 WMW Zeulenroda PYTE 3.15
- Manufacturer: Zeulenroda
- Model: PYTE 315
- Stroke length: 280 mm
- Daylight: 355 mm
The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm f...
Leipzig, Germany
Trusted Seller
1991 WAGNER DORTMUND VWG
- Manufacturer: Wagner
- Model: VWG
- Power requirement: 18 kW
Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit sto...
Leipzig, Germany
Trusted Seller
WMW Zeulenroda PYTE 2.5x150
- Manufacturer: Zeulenroda
- Stroke length: 280 mm
- Daylight: 355 mm
Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition.
Leipzig, Germany
Trusted Seller
2001 FEINTOOL MFA 2500
- Manufacturer: FEINTOOL
- Capacity: 250,000 kg
- Stroke length: 67 mm
roll-off try with leveller Capacity: 250 ton | V – ring nominal force: 30 - 125 ton | Counter ram nominal force: 30 - 125 ton | Ram stroke: 67 mm | Table surface area: 560 x 600 mm | Slide area: 560 x 560 | Numbe...
Gammertingen, Germany
Trusted Seller
2006 LAUFFER RKP 140
- Manufacturer: LAUFFER
- Stroke length: 800 mm
- Daylight: 1.0 mm
Pressure total: 140 ton | Stroke: 800 mm | Daylight: 1.004 mm | Free frontal opening l-r: 2.060 mm | Table surface area: 2.000 x 520 mm | Slide area: 2.040 x 520 mm | Working speed: 4 -20 mm / sec | Rapid travel...
Gammertingen, Germany
Trusted Seller
1989 SMG HZPU 1400/900 - 3600/2500
- Manufacturer: SMG
- Stroke length: 950 mm
- Daylight: 2,000 mm
with hydraulic tool clamps on the ram Pressure total: 1400 ton | Stroke: 950 mm | Daylight: 2000 mm | Table surface area: 3600 x 2500 mm | Slide area: 3600 x 2500 mm | Die cushion capacity in table: 400 ton | Die...
Gammertingen, Germany
Trusted Seller
1996 LOIRESAFE EDIM 800/320/28-20
- Manufacturer: LOIRESAFE
- Stroke length: 1,600 mm
- Daylight: 1,900 mm
Pressure total: 80 - 800 ton | Ram stroke: 1600 mm | Free frontal opening l-r: 2850 mm | Free lateral opening f-b: 1000 mm | Daylight: 1900 mm | Table surface area: 2800 x 2000 mm | Slide area: 2800 x 2000 mm | ...
Gammertingen, Germany