Used Presses in Germany

1988 Exner EX100SBZR 1000 kN

• Manufacturer: Exner

1 hydraulic double-column press (11), manufacturer: Exner, type EX100SBZR, built in 1988, power 42 kW, pressing force 1,000 kN, GG 11 Exner, type EX100SBZR, built in 1988, SN 10094, power 42 kW, pressing force 1,...

1998 BRUDERER BSTA 50 USL

• Manufacturer: Bruderer
• Model: BSTA 50 USL

BRUDERER precision roller feed BBV 205 / 120 Press capacity: 50 ton | Ram stroke adjustable: 16 - 51 mm | Slide adjustment: 64 mm | Free frontal opening l-r: 1100 mm | Free lateral opening f-b: 250 mm | Table sur...

1990 KAISER V 40 W 600

• Manufacturer: Kaiser
• Model: V 40 W 600
• Shut height: 290 mm

2002 a roll feeder was installed Modell MWVL-200, YOM 2002

HIDROGARNE PPCM - 50

• Manufacturer: HIDROGARNE
• Stroke length: 250 mm
• Daylight: 400 mm

Only in use for demonstration at our warehouse Press capacity: 50 ton | Throat depth: 265 mm | Stroke: 250 mm | Daylight: 400 mm | Table surface area: 700 x 450 mm | Slide area: 550 x 300 mm | Table height over f...

1986 Heilbron EP50 500 kN

• Manufacturer: Heilbron

1 eccentric press (23), manufacturer Heilbronn, type EP50, built in 1986, pressure force 500 kN, stroke 8 - 100 mm, stroke rate 140/min, ram adjustment 50 mm, drive power 3 kW, GG 3,000 kg, two-hand operation, sw...

2001 KAISER KSTU 1000 - 20 - 4 P

• Manufacturer: Kaiser
• Stroke length: 300 mm
• Shut height: 600 mm

electrical overload protection SIEMENS Control S7 2-hand control panel Schleicher leveller (650 mm, max. 2.0 mm) Wanzke decoiler (max. 6t) Helmerding feeder (600 mm, 0,6 - 6,0 mm)

2002 Exner EXSBZRD 500/100 5000 kN

• Manufacturer: Exner

1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 8...

1997 KAISER KSTU 1250-12.5-3PR

• Manufacturer: Kaiser
• Shut height: 450 mm

electrical overload protection pneumatic clutch 2 connecting rods PLC Siemens S5 Strip shear AI 40 max. shear force 10t Sheet thickness max. 4 mm Sheet width max. 400 mm Cross section 600 mm2 Kaiser Feeder KWV 40...

1020 liter heatable/coolable, insulated pressure vessel made of stainless steel 304

max. allowable working temperature: 50 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 50 °C remarks: Cooling system, consisting of a copper pipe that is attached ove...

1000 liter stainless steel 316 pressure vessel

• Manufacturer: Kühni AG

max. allowable working temperature: 200 °C notice: some residues of previous content, manhole cover plated

11118 Liter Rostfrjia heiz-/kühlbarer Reaktor aus V2A

• Manufacturer: Rostfrjia

max. allowable working temperature: 150 °C Volume: 11.118 liter | Vacuum: 1,0 bar | Max. excess pressure: 4,0 bar

5000 liter horizontal tank, Aisi 316

max. allowable working temperature: 50 °C remarks: 1 manhole diameter 500 mm in the front floor; tank with internal fittings (see photos); tank not suitable for use in the food sector

1500 liter pressure vessel, AISI304

max. allowable working underpressure (dj): 4,0 bar remarks: No guarantee for the functionality of the heat-/cooling jacket (has not been tested)

9140 liter vacuum vessel with internal full-pipe coil, AISI304

max. allowable working temperature: 200 °C max. allowable working temperature (dj): 242 °C remarks: Maximum operating pressure heating coil 35 bar; 3 support brackets, Fe; Manhole diameter approx. 490 mm; several...

11424 liter coolable pressure vessel / sterile tank, Aisi 304

• Manufacturer: Alfa-Laval

max. allowable working temperature: 145 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, pipe end cut flush remarks: Do...