- Trusted Seller
2" Acme Hill Model XL Double Leadscrew Threader #0110510
- Manufacturer: Acme
Specifications Equipped With 2" Acme Hill Model XL Double Leadscrew Threader Specifications: Capacity 1/2" to 2-1/2" included Carriage Travel 18" Spindle Speeds 26, 34, 43, 54, 66, 83, 108, 137 RPM Drive Shaft 41...
Houston, TX - Trusted Seller
1971 LANDIS 6
- Manufacturer: Landis
Note: All Specifications Subject to Verification Capacity: 2.5" - 6" | Spindle speeds: 10.8 - 36.7 RPM | Spindle motor: 7.5 HP | Carriage travel: 22" | Front 3-jaw chuck: 28" | Rear 3-jaw chuck: 32" | Spindle hol...
Houston, TX - Trusted Seller
1981 13-3/8" Harley Receding Die Head Pipe Threader #0110276
- Manufacturer: Harley
Specifications Equipped With 13-3/8" Harley Receding Die Head Pipe Threader S/N: 133 Model: HP753 Year: 1981 Specifications: Equipped With: (2) Universal 3-Jaw Chucks Power Rapid Traverse Coolant System Complete
Houston, TX - Trusted Seller
Oster 784 Pipe and Bolt Threader up to 4″
���Normal wear from use.��� Oster Threader 4������ Model 784 RE121 Only $4,899 USD! Excluding shipping. Sold as is, but warranted in good condition. We���re quite friendly and It���s much faster than back and f...
$4,899 USDMontreal, Canada - Trusted Seller
6 in. Oster Pipe and Bolt Threader, Model 716
6 inch ���Oster��� pipe and bolt threader, Model 716 Model (Cat. No.) 716 Headstock mounted push button control Heavy duty three phase motor, It���s now in our heated warehouse, and can be shipped on two days not...
$8,000 USDMontreal, Canada - Trusted Seller
Oster 716 Pipe and Bolt Threader 6″ model LE31
���Normal wear from use.��� Oster 716 LE31 Pipe and Bolt Threader 6��� capacity. Only $6,899.00 USD! Excluding shipping. Sold as is, but warranted in good condition. We���re quite friendly and It���s much faster...
$6,899 USDMontreal, Canada 
HORIZONTAL DRILLING AND TAPPING MACHINE, DIE CAST | INDUSTRIAL MACHINE | HYPNEUMAT INC.
- Manufacturer: Hypneumat Inc
Product Description This pneumatic feed and clamping system from Hypneumat Inc. is a specialized industrial equipment designed to automate processes such as drilling and tapping in production lines. Equipped wit...
Laredo, TX- Trusted Seller
ETTCO ATU-4 PRODUCTION TAPPING MACHINE AND TAPPING UNIT T151487
- Manufacturer: Ettco
4" of lead screw travel • 30 cycles per minute possible • Swivel mounted operator interface terminal, with English or Spanish display • Programmable controller • 3.5 HP, 1140 RPM high reversing motor 230/460 VAC,...
$1,980 USDEl Paso, TX Ridgid 300 Pipe Threader with Tripod legs
- Manufacturer: Ridgid
- Model: 300
This is a preowned item, what you see in the picture is what you get. Contact us if you have any questions regarding your purchase.
$3,000 USDMiami Lakes, FL
Ridgid No. 811 Universal 1/8'' to 2'' Die Head w/Threading Dies 1/4''
- Manufacturer: Ridgid
Ridgid Universal Die Head No. 811 1/8'' to 2'' Pipe 1/4'' to 2'' Bolt 1/4'' Dies Included
$210 USDUnited States
Tapmatic Reversible Tapping Head NCR50 W/ Cat 50 Toolholder 2500 RPM
- Manufacturer: CST Tapmatic
CST Tapmatic CAT 50 Taper Tapping Head Part #: NCR50 95% Feed Rate M12 Taps 2500 RPM Max Capacity: 1/2''
$605 USDUnited States
Ridgid No. 811 Universal 1/8'' to 2'' Die Head w/Threading Dies 1/4'' - 3/8''
- Manufacturer: Ridgid
Ridgid Universal Die Head No. 811 1/8'' to 2'' Pipe 1/4'' to 2'' Bolt 1/4'' - 3/8'' Dies Included
$210 USDUnited States
Tapmatic M12 Part #NCR1A, 1/2" Reversible Tapping Head Attachment 2000 RPM Max
- Manufacturer: Kennametal
Kennametal Tapmatic Reversible Tapping Head Attachment M12 1/2'' Part #: NCR1A 2000 RPM Max CAT 50 Taper
$200 USDUnited States
Tapmatic Model #NCR1A Reversible Tapping Attachment w/CAT 40 Holder 1/2'' Cap
- Manufacturer: TAPMATIC
Tapmatic Reversible Tapping Head w/CAT 40 Taper Holder Model #: NCR1A Max Capacity: 1/2'' or M12 2000 RPM Max
$225 USDUnited States- Trusted Seller
2006 KIA Kiacenter V25
- Manufacturer: Kia
KIA V25 CNC Vertical Machining Center New 2006 Control: Fanuc | Equipped with: Fanuc Control 16 ATC Coolant tank and pump | X: 16.0 in | Y: 15.0 in | Z: 15.0 in | Rpm: 8000.0 rpm | # atc: 16.0
United States
Tip: Enter manufacturer, model or keyword
