Used Processing in Victoria, Australia

Conveyor
3.6 mt long x 100 mm wide flat belt conveyor. The conveyor has magnets the lenth of it and was last used for moving cans. SEW geared drive .75kw 48 rpm. Stainless steel frame and rollers.
Melbourne, Australia
DAHAN DW-180
- Manufacturer: DETECTED_MANUFACTURER
NEW - Dewatering screw press with st/steel auger and dewatering screen. Capacity up to 10m3/hr 0.5mm (500micron) heavy duty St/Steel wedge wire screen 180mm dia screw auger with 80mm screw pitch. End plate resist...
Melbourne, Australia
FAM 60-230
- Manufacturer: FAM
Inclined stainless steel screw feeder. St/Steel hopper (60 Litre) with vibrating motor. Hopper dia at the top is 550mm. Distance from ground to top of Hopper is 700mm. Screw auger is 80mm dia and the discharge he...
Melbourne, Australia
FANTECH 27ALDW
- Manufacturer: Fantech
Fantech Air Fan. 11 kw 27 inch dual inlet. Inlet: 27 | Kw: 11 | Air flow: 7613 L/Sec | Static pressure: 741 PA | Total pressure: 801 PA | Outlet velocity: 10 m/s
Melbourne, Australia
Littleford 2000
- Manufacturer: Littleford
Littleford USA Plough Mixer. 2000L Mixing barrel 940 diam x 2940 L. Stainless steel mixing chamber. Drive 55kw 4 pole 415/3 motor. Falk Shaft mount gearbox ratio 14.68/1.
Melbourne, Australia
FLOTTWEG Z32
- Manufacturer: Flottweg
Refurbished - Flottweg Z33 Decanter fitted with a 22kw motor, Stainless steel contact parts. Approx 4,000-8,000lts per hr This decanter has a pump discharge which allows product to be pumped out and minimise Oxyg...
Melbourne, Australia
ALFA LAVAL Clip 10 RM
- Manufacturer: Alfa-Laval
- Model: CLIP 10 RM
Alfa Laval Clip 10 RM Plate Heat exchanger. Food grade. Last used to pasteurize Sugar syrup at 30,000L/hr. Pressure 10bar ,Temp 110c, Year 1995 , Volume 361.5L Regular service by Thornhill gaskets.
Melbourne, Australia
CHAMPION CDS75
- Manufacturer: Champion
- Hours: 400 hour
- Nominal power: 75 kilowatt
Champion CSD75, 75kW, 100Hp, Sullair powered energy efficient air end over 400cfm. Acoustically housed in very good condition. Make Champion Model CSD75 Motor 75kw (100Hp) Capacity 400cfm Pressure 8 bar Housed Ac...
Melbourne, Australia
CMG 45
- Manufacturer: CMG
Axial Tube Fan. Run and Tested. CMG Electric motor. 0.55kW 1370 RPM
Melbourne, Australia
SEW 2.4m x 0.35m
- Manufacturer: SEW-Eurodrive
Two conveyors in one. One slow conveyor and one fast conveyor bolted up together. First section is 1.5m long x 350mm wide ss SEW drive .75kw @ 81 rpm Second section is .9m x 350mm wide ss SEW drive .75kw @ 150 rp...
Melbourne, Australia
HMPS HMPS5010
- Manufacturer: HMPS
HMPS5000 series fully automatic case packers eliminate end of line labour constraints. Packing various products in wrap-a-round, end-load, sleeve or tray style cartons. The system erects, loads and seals cartons ...
Melbourne, Australia
CONTECH ENGINEERING 2.4 x 450
- Manufacturer: CONTECH ENGINEERING
Flat belt conveyor with reject mechanism. Last used on confectionary. 2.4mt long x 450mm wide. Stainless steel below the belt. Mild steel frame. Fitted with SEW geared drive. 0.37kw 36rpm.
Melbourne, Australia
SEW 8.2 x 0.7
- Manufacturer: SEW-Eurodrive
Flat belt conveyor, 8.2m long x 700mm wide, belt height from the ground is 900mm. Driven by SEW geared motor 0.12kw, 415V with varaiable speed drive.
Melbourne, Australia
ALPMA V64/ASch
- Manufacturer: ALPMA
Soap wrapper (Pleated) for round soap bars. Made in Germany by Alpma Model V64/A Sch. Last doing 50 units per min paper pleated round soap 60mm diam. Also has a H&B Schleuter gmbh Germany Labeler.
Melbourne, Australia
JACMOR ENGINEERING 400 x 3
- Manufacturer: JACMOR ENGINEERING
Stainless steel Auger 400 diam. 2 lengths approx 3m each.
Melbourne, Australia