Used Processing in Switzerland

Trusted Seller
2007 MECAIR 3001-100
- Manufacturer: MECAIR
Aspirated air: 3000 m3/min | Static pressure: 3400 Pa | Filter surface totally: 30 m2 | Nominal speed: 2850 t/min | Voltage 50 hz 3x: 400 Volt | Installed power: 6 kW | Weight: 300 kg | Length: 1200 mm | Width: ...
Brügg, Switzerland
Trusted Seller
2019 URRETXU PED EX 132
- Manufacturer: URRETXU
Machine's weight about: 300 kg | Length: 9500 mm | Width: 700 mm | Height: 1800 mm
Brügg, Switzerland
Trusted Seller
2019 URRETXU PED EX 132
- Manufacturer: URRETXU
Machine's weight about: 300 kg | Length: 9500 mm | Width: 700 mm | Height: 1800 mm
Brügg, Switzerland
Trusted Seller
2002 NETSTAL SYN 1500-460
- Manufacturer: Netstal
Clamping force: 150 to | Stroke volume: 201 cm3 | Ejector stroke: 150 mm | Ejector force: 49 kN | Pressure on material: 2218 bar | Screw diameter: 40 mm | From: 20 t/min | Up to: 300 t/min | Mould heating: 20 kW...
Brügg, Switzerland
Trusted Seller
2005 ELBARON RON/A 60 SV
- Manufacturer: ELBARON
Aspirated air: 720 m3/h | Voltage 50 hz 3x: 230 Volt | Total installed power: 0.328 kW | Weight: 27 kg | Length: 1100 mm | Width: 500 mm | Height: 500 mm
Brügg, Switzerland
Trusted Seller
2011 ELBARON RON/A 60 SV
- Manufacturer: ELBARON
Aspirated air: 720 m3/h | Voltage 50 hz 3x: 230 Volt | Total installed power: 0.328 kW | Weight: 22 kg | Length: 700 mm | Width: 470 mm | Height: 380 mm
Brügg, Switzerland
Trusted Seller
2013 KNOLL VRF 1000 / 3200
- Manufacturer: Knoll
Total capacity: 5800 l | Flow / duty: 1000 l/min | Voltage 50 hz 3x: 400 Volt | Total installed power: 61 kW | Length: 3200 mm | Width: 2120 mm | Height: 2735 mm | Water cooler: HSS
Brügg, Switzerland
Trusted Seller
1993 Macchi coextruder
- Manufacturer: Macchi
Macchi coextruder year 1993 3 layers Thickness control: K design: (Karat, Kundig K-150); contact system integrated with air ring No water-cooled rollers after nip roller (Calender) Back to back rewinders, model B...
Lugano, Switzerland
Trusted Seller
2010 Curioni 541
- Manufacturer: Curioni
Curioni 541 year 2010 For the production of paper bags with flat concealed handle unit and die cut / banana handle With Robatech hotmelt gluing unit (for the handle unit and bottom gluing system which can be also...
Lugano, Switzerland
Trusted Seller
1979 Hosokawa Alpine extruder
- Manufacturer: Alpine
Hosokawa Alpine extruder year 1979/80, made in Germany Monoextruder In 2002 was done a refurbishment (new screw cylinder complete, outer part of screw, PLAST CONTROL dosing system for 3 materials). For the produc...
Lugano, Switzerland
Trusted Seller
1962 W&H Tuber AM 1130/65
- Manufacturer: W&H
W&H Tuber AM 1130/65 year 1962 Flush cut 2-3 plies With 2 color in line flexo printer With photocell for preprinted material Overhauled in 2017 Visible in production Immediately available About Complete line for ...
Lugano, Switzerland
Trusted Seller
1965 G&H Bottomer Progress 525
- Manufacturer: GARTEMANN & HOLLMANN
GARTEMANN & HOLLMANN Bottomer Progress 525 year 1965 For the production of open mouth and valve sacks With one valve unit Glues the bottom and valve of a paper sack in automatic mode in a single cycle Double feed...
Lugano, Switzerland
Trusted Seller
2006 W&H Complete multiwall line: Tuber AM 2185, In line printer Flexa 820, Bottomer AD 2390 with Trans System 2 and W&H palletizer Arcomat 2
- Manufacturer: W&H
In line printer 4 color Tuber W&H Transystem 1 with software SIMATIC S7-300 of SIEMENS Bottomer With valve unit W&H Transystem 2 with software SIMATIC S7-300 of SIEMENS Palletizer Visible in production Immediatel...
Lugano, Switzerland
Trusted Seller
1973 W&H Triumph 1
- Manufacturer: W&H
- Model: TRIUMPH 1
W&H Triumph 1 year 1973 with in-line printer 5 colors and photocell Every year on machine is done maintenance and all worn-out parts are changed 1 ply Equipped with 5 colors In-line printer. The machine was equip...
Lugano, Switzerland
Trusted Seller
2021 W&H paper sack line: W&H Tail-End Printer FLEXA 820, W&H Tuber AM 8115, W&H Bottomer AD 8320 CL with TRANSYSTEM
- Manufacturer: W&H
Bottomer AD 8320 CL with TRANSYSTEM year 2021 Tail-End Printer Tuber 3 plies Stepped end and flush cut Automation TRANSSYSTEMS 1 AUTOMATED MATERIAL FLOW SYSTEM between Tuber AM 8115 and Bottomer Bottomer for 2 an...
Lugano, Switzerland