Used Processing in Japan

Makino F-101
- Manufacturer: Makino
Specifications:Fully automatic type converted to semi-automatic Filtration area: 14.5m2 Filtration volume: 200L Filtration plate dimensions: 650 x 650 x 18 chambers Filtration plate material: PP
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: Tanabe Wiltech
Manual scraping device. Bottom discharge type. Main motor pole change specification, 13Kw-26Kw 200V, explosion proof
Hiroshima, Japan
1991 Mitsubishi Kakoki SJ-30T
- Manufacturer: Mitsubishi
1 set of new spare parts available Disassembly tool is available
Hiroshima, Japan
Reaction can 5000L
Material: Wetted parts SUS304. Drive unit is removed and placed separately.
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
2007 IHI IX-36T
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2007 Sekko Sangyo SSR150
- Manufacturer: Seikou Sangyo
18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units
Hiroshima, Japan
Tokuju V-150
- Manufacturer: Deoksary
Total capacity: 335L Stocking capacity: 150L Power: 1.5kw | Purchasing area: 50 Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
3000 L Cylinder vertical type
Jacket: SS, with stirrer Material: SUS | Quantity saved: One
Hiroshima, Japan
3300L Cylindrical vertical
Main unit SUS Jacket SS Distiller Material: SUS · SS | Quantity saved: One
Hiroshima, Japan
3000 L Cylinder vertical type
With level gauge H3180 (tank only) · H3930 (whole) φ 1100
Hiroshima, Japan
SUS tank
Total capacity: approx. 3000L. *Some accurate capacity requires actual size measurement due to lack of data. Equipped with an agitator (eG3).
Hiroshima, Japan
1990 Hosokawa Micron DBX-1000RMW
- Manufacturer: ホソカワミクロン
Mixing capacity 1000L Motor: 3.7Kw for rotation (explosion-proof) / 0.4Kw for revolution (explosion-proof) Rotation speed: 55RPM for rotation/ 1.6RPM for revolution Design withstand pressure: FV Jacket: 1.9Kg/cm²...
Hiroshima, Japan
SUS tank
Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity.
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: 巴工業
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
Mitsubishi SJ 6000 Centrifugal Separator
- Manufacturer: Mitsubishi
- Model: SJ 6000
Good condition Mitsubishi SJ 6000 Centrifugal Separators manufactured in 2010. Located in Japan and other countries. Click request price for more information.
Japan