Processing » Foundry & Casting » Peru

Building Filters

9

Used Foundry & Casting in Peru

MULTIPLE SHEAR
- used
Features Multi-Shear Origin Italy Condition Used Multi-shears are equipped with multiple blades arranged in a specific configuration. These blades work together to simultaneously cut multiple sections of sheet me...
Lima, Peru
2004 Liebert 6 Ventiladores
- refurbished
- Manufacturer: Liebert - Vertiv
6 Fan Dry Cooler Volts: 440 Engines: 0.75 HP
Lima, Peru
2024 Inductotherm 1 TM
- refurbished
- Manufacturer: Inductotherm
1 TM Induction Furnace Body. Internal Diameter of the Coil: 59 cm Coil Height: 90 cm Number of Coil Turns: 24
Peru
Ramming Mass CMG80CR
- new
- Manufacturer: CMG
CMG80CR STAMPABLE REFRACTORY MASS CMG80CR is a ramming compound designed for use in the construction of the pouring spout of induction furnaces and the walls of pouring ladles. This mass is made from high purit...
Lima, Peru
2005 Varios Eje excentrico
- refurbished
- Manufacturer: Varios
Shakeout: Under restoration Width: 1500 mm: Length: 2400 mm | Engine: 5 hp: Vibration: Eccentric shaft
Peru
2012 Power Hammer 215
- used
- Manufacturer: Power Hammer
To break necks of 9 cm in diameter in chrome molybdenum steels and up to 6 inches in diameter in white irons, varying the pressure from 60 psi, for smaller diameters and working with 100 psi or more, for larger d...
Lima, Peru
1985 Inductotherm - USA VIP Power Trak
- refurbished
- Manufacturer: Inductotherm
Power Supply of 350 Kw- 1200 Hz Oven Capacity: (2) of 750 kilos - with refrigerated cables, Hydraulic System with control for hydraulic lifting of the oven. Closed circuit cooling system, with two water pumps and...
Lima, Peru
$CMG Refractario Apisonable en Seco$
CMG Refractario Apisonable en Seco
- new
- Manufacturer: CMG
CMG80CR is a dry neutral mass, designed to be used as a refractory lining in induction furnaces, mainly for production of high manganese steel, high carbon steel, stainless steel and alloy steel, etc. This mass ...
Lima, Peru
Fluidized Bed Sand Classifier and Cooler
- refurbished
- Manufacturer: CANOMINERALES GROUP
Cools and classifies foundry sand - Fluidized Bed type - Capacity up to 15 TPH - New cooling coil, pressure tested - New thermocouples at the sand inlet and outlet Suitable for sand with temperature of 300°C, in...
Lima, Peru