- Trusted Seller
Herman-Schwabe D
- Manufacturer: Herman-Schwabe
- Capacity: 25,000 kg
25 TON HERMAN SCHWABE CLICKER PRESS MODEL D S/N 26694 RATED CAPACITY ............................... 25 TONS STROKE ...........(ADJUSTABLE)................ 1/4" - 3" SWING ARM ..............................
HERMAN SCHWABE Hydraulic Programmable Traveling Die Cutting / Impression Press
- Manufacturer: Herman-Schwabe
HERMAN SCHWABE Hydraulic Traveling Die Head Cutting / Impression Press Model: ATH S/N: 95130 72" Auto-feed Programmable Traveling Head Durant Solidstate 1900 Controller with Programmable Product feed for Continuo...
- Trusted Seller
SCHWABE 45002
- Manufacturer: Herman-Schwabe
- Model: 45002
- Capacity: 110,000 kg
Used- Herman Schwabe Die Press, Model 45002. 110 Ton capacity. Measurements of the Cutting Surface: 32" W. x 80" L . *Light Curtains are attached, but do not function*
Valley Cottage, NY - Trusted Seller
SCHWABE DG
- Manufacturer: Herman-Schwabe
- Capacity: 35,000 kg
Schwabe DG die cutter 30'' x 34'' cutting area 35 ton shuttle table under power
Valley Cottage, NY - Trusted Seller
SCHWABE 25 TON
- Manufacturer: Herman-Schwabe
- Capacity: 25,000 kg
25 TON SCHWABE HYDRAULIC CLICKER PRESS Model D 3 HP 1725 RPM 115/230/1/60 motor pressure control Dual trigger pushbuttons Weight approx. 3300 lbs. Overall dimensions approx. 40" L-R x 60" F-B x 78" H
Valley Cottage, NY - Trusted Seller
SCHWABE 25 TON
- Manufacturer: Herman-Schwabe
- Capacity: 25,000 kg
25 TON SCHWABE HYDRAULIC CLICKER PRESS Model D 3 HP 1725 RPM 115/230/1/60 motor pressure control Dual trigger pushbuttons Weight approx. 3300 lbs. Overall dimensions approx. 40" L-R x 60" F-B x 78" H
Valley Cottage, NY - Trusted Seller
SCHWABE SR 230
- Manufacturer: Herman-Schwabe
- Capacity: 230,000 kg
MAX. CAPACITY 230 TONS STROKE APPROX. 12″ RAM ADJUSTMENT __ MAX. DAYLIGHT APPROX. 12″ BED AREA 91″ X 45″ (RL X FB) RAM AREA 88″ X 45″ (RL X FB) FLOOR TO BED HEIGHT 33.75″ PRESS CONTROLS ALLEN-BRADLEY MICROLOGIX 1...
Valley Cottage, NY - Trusted Seller
SCHWABE SR-110
- Manufacturer: Herman-Schwabe
- Capacity: 110,000 kg
- Stroke length: 203.2 mm
Used Schwabe SR 110 Press 32” x 64” Platen Size Model SR-110 110 ton capacity Sliding Table 8” Stroke 10” daylight It was being used to die cut foam.
Valley Cottage, NY - Trusted Seller
SCHWABE SR-115
- Manufacturer: Herman-Schwabe
- Capacity: 115,000 kg
- Stroke length: 203.2 mm
SCHWABE SR-115 Used Hydraulic Press Tonnage: 115 T, Stroke:8 inches, Bed Width:32" x63 " inches, dual shuttle tables deal for various industrial applications. 32”x 64” dual sided dshuttle tables, 115 tons
Valley Cottage, NY 
30T 48″X48″, 40″ DAYLIGHT, 20″ STROKE, SCHWABE
- Manufacturer: Herman-Schwabe
MODEL 4PHS. SERIAL #30006. NOMINAL BED AREA IS 48” L TO R X 48” F TO B; HOWEVER THE PRESS IS SET UP WITH A PNEUMATICALLY OPERATED SLIDE-OUT PLATE THAT HAS SEVERAL CUT-OUT AREAS (18” X 12” FRONT-CENTER; ETC…). THE...
Grand Rapids, MI- Trusted Seller
Double grinding stand from Schwabe - EK4/4 30615
- Manufacturer: Herman-Schwabe
Double sanding stand, double sanding machine, stand sanding machine, stand sanding stand
Wiefelstede, Germany 
GSW Schwabe AG LHM 150/800 #6903
- Manufacturer: Herman-Schwabe
Uncoiler, Sheet Metal Decoiler, Used machine Overall dimensions: 860 x 740 x 1430 mm | Load capacity: 150 kg | Sheet width: 150 mm
Tatabánya, Hungary
GSW Schwabe AG LHM 150/800 #6902
- Manufacturer: Herman-Schwabe
Uncoiler, Sheet Metal Decoiler, Used machine Overall dimensions: 860 x 740 x 1430 mm | Load capacity: 150 kg | Sheet width: 150 mm
Tatabánya, Hungary
GSW-SCHWABE MHM 1,5/1250
- Manufacturer: Herman-Schwabe
- Manual spreading - motor-driven - pressure roller - new lacquering
Schmölln, Germany
1987 GSW SCHWABE LHM 80/650
- Manufacturer: Herman-Schwabe
motorized reel Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: 80 kg | Outer coil diameter: 650 mm | Thorn height: 1000 mm | Expansion area: ...
Schmölln, Germany
Tip: Enter manufacturer, model or keyword