Building Filters
Peter Wolter Microline AC 530-F double-disc fine sanding machine
used
- Manufacturer: Micro Line
Technical specifications Mass: Approx. 260 kg | Operating voltage: 400V + 6% -10% , 3- | Frequency: 50 Hz | Control voltage: 230 / 24 V | Total output: 27.9 kVA | Max. fuse: 100 A gl. | Compressed air: 6 bar | Ai...
Zuchwil, SwitzerlandCitizen M32-V sliding headstock automatic lathe
used
- Manufacturer: Citizen
- Model: M32V
Technical specifications Max. machining diameter: / 32 mm | Max. machining length: / 320 mm per chuck | Max. diameter for frontal drilling: / 12 mm | Max. diameter for frontal thread cutting: / M10 | Diameter spi...
Zuchwil, SwitzerlandCitizen M20-C CNC automatic lathe
used
- Manufacturer: Citizen
- Model: M20
Technical specifications Max. machining diameter: / / 20 mm | Max. machining length: / / 320 mm / chuck | Max. drilling diameter: / / 10 mm | Max. tapping diameter: / / M8 | Through-hole diameters: / / 24 mm21 mm...
Zuchwil, Switzerland
Tsguami BS18DE(S)-III CNC automatic lathe
used
Technical specifications Number of axes: 6 | Number of spindles: 2 | Main spindle, diffuser: 18 mm | Traversing distance: 210 mm | Number of revolutions: 8`000 rpm | C -axis: 1 | Against spindle: 18 mm | Toolhold...
Zuchwil, Switzerland
Takisawa NEX-908 CNC lathe
used
- Manufacturer: Takisawa
Technical specifications Capacity: Main Spindle / 2nd Spindle | Swing: 670 mm / 670 mm | Max. turning diameter: 330 mm / 330 mm | Max. turning length: 551 mm / 551 mm | Bar work: 52 (65) mm / 35 (52) mm | Spindle...
Zuchwil, Switzerland
Tsugami BS12-III automatic lathe
used
- Manufacturer: Tsugami
- Model: BS12
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
Tsugami BS18DE(S)-III CNC automatic lathe
used
- Manufacturer: Tsugami
- Model: BS18
Technical data No responsibility is taken for the correctness, completeness and up-to-dateness of the information.
Zuchwil, Switzerland
Mori Seiki NMV3000DCG CNC machining center
used
- Manufacturer: Mori Seiki
- Model: NMV-3000DCG
Technical specifications X axis: / 500 mm | Y-axis: / 350 mm | Z-axis: / 510 mm | B-axis: / +160 ° - -180° | C -axis: / 360 ° | Distance between table surface and floor: / 850 mm | Table size: / 350 mm | Max. wor...
Zuchwil, Switzerland
Brother TC-22A machining center
used
- Manufacturer: Brother
- Model: TC-22A
Technical specifications Number of axes: / 5 | X axis: / 500 mm | Y-axis: / 410 mm | Z-axis: / 610 mm | Spindle speed: / 12`000 rpm | Spindle nose: / BT30 | Tool changer, number: / 26 | Tool change time: / 0.7 se...
Zuchwil, Switzerland
YCM NSV102A CNC machining center
used
Technical specifications Spindle speed: 12`000 rpm | Spindle nose: BT40 | X axis: 1020 mm | Y-axis: 600 mm | Z-axis: 600 mm | Distance between spindle nose and worktable: 100-700 mm | Dimensions: 1120 x 650 mm | ...
Zuchwil, Switzerland
Mikron VCE600+ machining center
used
- Control: iTNC Heidenhain 530
Technical specifications X axis: 600 mm | Y-axis: 500 mm | Z-axis: 540 mm | Type of drive: Timing belt | Max. number of revolutions: 10`000 rpm | Tool holder: ISO 40 | Tool spindle power: 12 kW | Torque: 96 Nm | ...
Zuchwil, Switzerland
Hermle C800 CNC machining center
used
- Manufacturer: Hermle
- Model: C 800
Technical specifications Number of revolutions: 0- 18`000 rpm | Spindle nose: HSK-A63 | Feed speed: 1-35 m/min | Feed force: 8000 N | X axis: 800 mm | Y-axis: 600 mm | Z-axis: 500 mm | Dimensions of the machine: ...
Zuchwil, Switzerland
Wahli W90 CNC gear cutting machine
used
- Manufacturer: Wahli
- Model: W-90
SCOPE OF OFFER Totally overhauled and since then unused Wahli W90 CNC gear cutting machine Control: Delta Tau Advantage 400 DOCUMENTATION Operating manual of the machine (German) Operating manual of the control A...
Zuchwil, Switzerland
HR10W DPLASER Rack DYAG marking laser
used
SCOPE OF SUPPLY HR10W DPLASER Rack DYAG Marking Laser TBH Saturation filter system DOCUMENTATION Complete operating instructions (in German language) Physical and electrical characteristics: Characteristics of th...
Zuchwil, Switzerland
STRAUSAK HS 35 EG CNC gear cutting machine
used
- Manufacturer: Strausak
SCOPE OF SUPPLY Strausak HS 35 EG CNC gear cutting machine (year: 2005) Hydraulic aggregate / coolant pump Control system: Siemens Simatic C7-626 DOCUMENTATION Operating manual of the machine Operating instructio...
Zuchwil, Switzerland
