Andre Hauer beslag
- Manufacturer: Hauer
passer til case IH cx ok McCormick cx med hydraulik ventil og joystick
$1,013 USDTjele, Denmark
2010 Hauer HSh 3000
- Manufacturer: Hauer
Used Hauer snowplow blade Hsh 3000 MM, Category II three-point linkage, Elastic wheels, Rubber fabric strip, Clearing width in angled position 2600 mm, Overload protection.
$4,058 USDBad Lauterberg, Germany
2023 Hauer HSh 2800
- Manufacturer: Hauer
3-point linkage, Clearing width 2430 mm at angle, Blade height center/outer 750/850 mm, Rubber/fabric blade HS/SK 2800 200/40, Elastic wheels HS, Hydraulic side shift with 2 cylinders, Overload release device wit...
2023 Hauer HSh 2800
- Manufacturer: Hauer
3-point linkage, Clearing width 2430 mm at angle, Blade height center/outer 750/850 mm, Rubber/fabric blade HS/SK 2800 200/40, Elastic wheels HS, Hydraulic side shift with 2 cylinders, Overload release device wit...
Hauer PG 1100
- Manufacturer: Hauer
Hauer Pallet Fork PG Tines adjustable Tine length 1100mm Euro 8 mounting
Rickenbach, Switzerland
2024 Frontladergeräte Hauer
- Manufacturer: Hauer
Schaufel 2400.- Hauer - Leichtgutschaufel lang verstärkt 2600 mm Breite 2600mm, Höhe/Tiefe 800 / 1000, Inhalt 1,34m³, Gewicht 365 kg, Aufnahme SWE Euro 8 Die Schaufeln haben eine Schürfleiste aus Hochleistungssta...
Effretikon, Switzerland
2024 Hauer HS 2800
- Manufacturer: Hauer
- Model: HS 2800
Snow plow single-piece, width 2800mm 4 retractable springs for impact protection Hydraulic side adjustment 3-point mounting for front hydraulics Cat. 2 Height-adjustable glide sole, pendulum balance lockable Scre...
Rickenbach, Switzerland
Hauer front / rear weight
- Manufacturer: Hauer
Front/Rear weight 3-point hitch Steel tub filled with concrete Weight 450 kg, 700 kg, 1000 kg, 1500 kg
Rickenbach, Switzerland
Hauer toolbox with ballast weight
- Manufacturer: Hauer
Front weight with underrun protection Front weight 450kg filled with concrete Tool box with 380 liter filling volume Width 1334mm, depth 846mm, height 802mm Divider wall centered Underrun protection on the side F...
Rickenbach, Switzerland
Hauer KM 2200
- Manufacturer: Hauer
Record Kat.2 2 Stroke cylinder, tipping angle 92° Width 2200mm Inside depth 1250mm Useful load tipping capacity 4500kg 4 contact points on the floor, rear wall pendulable and pivotable on request with extension d...
Rickenbach, Switzerland
2024 Hauer Kippmulde 2200
- Manufacturer: Hauer
Serienausstattung: • Dreipunktaufnahme Kat. 2 • pendelbare Rückwand • vier Anschlagpunkte für Zurrgurte in der Kippmulde • Reflektorstreifen • Kippmulde Graphitgrau RAL 7024 und Rückwand Hauer orange (optional al...
Effretikon, Switzerland
2023 Hauer HAUER HS 2800
- Manufacturer: Hauer
- Model: HS 2800
- Hours: 1 h
Hauer HS2800 + Anbaurahmen HS 3-Punkt Cat. 1/2 ohne Pendelausgleich + min. Durchfahrtsbreite bei 29 Grad: 2540 mm + hydraulische Seitenverstellung mit zwei Zylindern + abgesichert durch ein Doppelschockventil + e...
Hauer VS-L2800
- Manufacturer: Hauer
Hauer V-Blade Snow Plow Two-part plowshare, laterally raised Hydraulic blade adjustment Spring flaps plowshare safety 2-fold 3-point mounting, pendulum balance Professional control with control element Elastic wh...
Rickenbach, Switzerland
2025 Hauer SBS bale cutter
- Manufacturer: Hauer
Hauer round bale cutter with film holder 4 tines Length: 1.1 m 2 double-acting hydraulic cylinders Maximum opening range: 1,520 mm Maximum operating pressure: 200 bar, Weight: 440 kg Bale weight: max. 1,800 kg F...
Rickenbach, Switzerland
Tip: Enter manufacturer, model or keyword