Used threading tools

MANVILLE #70 1000-C

• Manufacturer: Manville

Maximum thread diameter: 1-1/4" | Depth of die pockets: 6-1/8" | Strokes per minute: Approx. 40 | Length of moving die: 20" | Length of stationary die: 19" | Distance between top of die block & bottom of tie rod...

TESKER 840

• Manufacturer: TESKER

Diameter: Max Diameter 15" (380mm) | Rolling pressure: 500,000 LBS Continuous / 600,000 Intermittent | Spindle diameter: 5 1/2" (139mm) | Die face (maximum): 15" (380mm) | Die diameter (maximum): 16" (400mm) | S...

KINEFAC MC-4 CNC 2- Roll

• Manufacturer: KINEFAC

Spindle diameter: 1-1/2" (40mm) | Maximum die width: 2-5/8" (115mm) | Die diameter range: 3 - 4 - 3/8" (75mm - 110mm) | Minimum diameter in or thrufeed: 1/32" (1mm) | Maximum diameter thru feed: 3/4" (20mm) Unli...

1984 WARREN INDUSTRIES WT-1000

• Manufacturer: Warren
• Model: WT-1000

Die requirement: "0" or "00" | Screw diameter capacity: #2 to #12 (1/4") | Speed range: 90 to 1000 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4500 lbs | Approx. floor size: 56"...

HARTFORD 312

• Manufacturer: Hartford
• Model: 312

Production: 33 - 150PPM | Screw diameter capacity: No. 6 ( .138 ) through 5/16" | Thread length capacity: 1/8" - 2-1/2" | Approx. floor size: 4' x 6' | Approx. weight: 4,750 lbs. | Die pocket depth: 2-5/8" | Equ...

ASSEMBLY STATION TO INCLUDE SPEEDYCUT CORP MODEL ST-O TAPPING MACHINE; S/N JOV2-1197, PIAB AIR

• Manufacturer: Piab

ASSEMBLY STATION TO INCLUDE SPEEDYCUT CORP MODEL ST-O TAPPING MACHINE; S/N JOV2-1197, PIAB AIR BLOCK, PALM BUTTON CONTROL, AIR REGULATORS, AIR TANK, WORK BENCH NOT INCLUDED - For convenience, the loading fee of $...

WATERBURY #0

• Manufacturer: Waterbury Farrel

Maximum production: 145 - 175 PPM | Maximum thread length: 1-1/2" | Maximum thread diameter: 3/16" | Die pocket depth: 1-5/8" | Length of stationary die: 2-3/4" | Approx. floor size: 38" W x 61" l | Equipped wit...

1990 HARTFORD #30/40-180

• Manufacturer: Hartford

Capacity: 5/16" thru 5/8" Diameter | Maximum thread length: to 4-1/2" (at max Dia. 2") | Maximum shank length: 6" | Production rate: 90 to 180 PPM Standard #30 | Die pocket depth: 4-5/8" | Approx. floor size: 7...

Tap And Die Set

, location: Bristol, VA

Regal Cutting Tools 015712AS 1-1/4" Pipe Tap

• Manufacturer: Regal

Regal Cutting Tools 015712AS 1-1/4" Pipe Tap 1-1/4-11 BSPP 55DEG M0 D 5FL PIPE

Flexarm FAV-14-30 #6376

• Manufacturer: Flexarm

Flexarm 19″ – 37″ Assembly Arm Inventory # 6376 (Assembly Arm Only – Tooling Not Included) Made in USA These vertical assemblers can withstand motor torque up to 30-foot pounds, for use at various angles, a swive...

Flexarm FAV-14 #6375

• Manufacturer: Flexarm

Flexarm 19″ – 37″ Assembly Arm Inventory # 6375 (Assembly Arm Only – Tooling Not Included) Made in USA These vertical assemblers can withstand motor torque up to 10 foot pounds, for use at various angles, a swive...

Flexarm CVA-10 #6377

• Manufacturer: Flexarm

Flexarm 8″ – 28″ Assembly Arm Inventory # 6377 (Assembly Arm Only – Tooling Not Included) Made in USA These vertical assemblers can withstand motor torque up to 10-foot pounds, for use at various angles, a swivel...

BRANDT HK-3 Model HK-3 (3Ton) Two Die Cylindrical Thread Rolling Machine

• Manufacturer: Brandt

Equipped With > The HK series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head. > All machines equipped with AC Variable Speed Drives, & Swivel spindles for both infeed/t...