Used threading

Trusted Seller
Ridgid 535 Power Pipe Bolt Threader Universal Die 120 Volt 811A Universal Die
- used
- Manufacturer: Ridgid
- Model: 535
Used, in Good Working Condition, Tested. This unit is missing some parts. Needs the sump strainer and strainer pan. The handle is missing one lever. Has a newer 811A die head. 1/8-2" pipe. Setup for 120V. If this...
$1,402 USD
Millersburg, IN
Trusted Seller
TSUGAMI R15A
- used
- Manufacturer: Tsugami
- Model: R15A
Maximum rolling force: 15 TON (M) | Maximum rolling capacity infeed: 75mm | Maximum thread length (infeed): 150mm | Spindle diameter: 54mm | Spindle speeds: (4 Step) 20, 36,58, 82 RPM | Max thread pitch: 5mm | S...
Ivyland, PA
Trusted Seller
HARTFORD 20-225
- used
- Manufacturer: Hartford
- Model: 20-225
Screw diameter capacity: 1/4" thru 1/2" | Maximum thread length: to 3" | Thread length at max. diameter: 1-1/2" | Maximum shank length: 4" | Production rate: 135 - 225 PPM | Die pocket depth: 3-1/8" | Flat die s...
Ivyland, PA
Trusted Seller
Hypneumat Inc. #S200EHB Drill and Tap Machine
- used
Location San Antonio. TX Lot # 101 System ID # 4230905 End Date Central Standard Time Start Date Central Standard Time Item # 4230906 Leeson 1/2 HP Motor, 230/460 Volt, 50/60HZ
Chicago, IL
Trusted Seller
2008 Fanuc A-T21iFL
- used
- Manufacturer: Fanuc
- Model: A-T21IFL
Renishaw Probing included 21 Tool Capacity Extended X-axis Travel: 27.5" Extended Table Length: 33.4" Coolant tank Spindle Chiller
$36,500 USD
Get financing
Est. $687/mo
Chicago, IL
Ridgid #535 Pipe Threader 1/2'' - 2'' Capacity w/2x Die Heads and Dies on Stand
- used
- Manufacturer: Ridgid
- Model: 535
Rigid #535 pipe threader 2x die heads w/dies 1/2" to 2" capacity on 4 leg stand 1/2 HP, 115 VOLTS, SINGLE PHASE
$1,950 USD
Cedarburg, WI
Trusted Seller
HARTFORD 10-300
- used
- Manufacturer: Hartford
- Model: 10-300
Diameter: #6 thru 5/16" | Maximum production: Variable to 300 PPM | Thread length capacity: 1/8" thru 3" | Blank length maximum: Up to 4" | Electrics: 220V | Equipped with: Check out our full inventory
Ivyland, PA
Trusted Seller
1996 ROLLMAX 5NF
- used
- Manufacturer: ROLLMAX
Production: 1500 PPM | Screw diameter capacity: .050" - .375" | Thread length capacity: 3" | Approx. floor size: 54" W x 66" L x 64" H | Equipped with: 42" Vibratory Bowl
Ivyland, PA
Trusted Seller
HARTFORD 190
- used
- Manufacturer: Hartford
- Model: 190
Screw diameter capacity: #0 (.060") - #10 (.190") | Thread length capacity: 1/8" - 1-1/2" | Maximum speed: 175 PPM | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs
Ivyland, PA
Auction
Guide To Threads,Threading, and Threaded Fasteners
- used
By Woodrow W. Chapman. Modern Machine Shop. Copyright 2004 Hardcover. Fastener Standards. Compiled by Industrial Fasteners Institute Fourth Edition 1965. Simpson's Manual Of Screw Cutting Complete, Third Ed...
Blaine, MN
Visit Auction Website
Trusted Seller
HARTFORD A-190-M
- used
- Manufacturer: Hartford
- Model: A-190-M
Screw diameter capacity: #0 thru #10 | Thread length capacity: 1/8" to 1-1/2" | Maximum speed: 175 PPM | Motor: 3 HP | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs
Ivyland, PA
Trusted Seller
HARTFORD A-190-HM
- used
- Manufacturer: Hartford
Thread length capacity: 1/8" to 1-1/2" | Screw diameter capacity: #0 thru #10 | Motor: 3 HP | Maximum speed: 175 PPM | Approx. floor size: 4' x 5' | Approx. weight: 1,600 lbs
Ivyland, PA
Trusted Seller
HARTFORD 0-500
- used
- Manufacturer: Hartford
- Model: 0-500
Diameter: #2 thru #10 (.093" - .187") | Production: 500 PPM | Blank length maximum: 3" | Thread length (maximum): 2-1/2" | Electrics: 5 HP 480V | Approx. weight: 2,780 lbs | Equipped with: AC Motor & Controls, E...
Ivyland, PA
Trusted Seller
HARTFORD 4-600
- used
- Manufacturer: Hartford
- Model: 4-600
Diameter: through 1/4" | Maximum shank length: 3" | Thread length (maximum): 2" | Production: 200 - 600 PPM | Electrics: 7 1/2 HP AC Motor & Controls | Approx. weight: 5700# | Approx. floor size: 5'2" x 6'8" | E...
Ivyland, PA
Trusted Seller
HARTFORD 4-600
- used
- Manufacturer: Hartford
- Model: 4-600
Diameter: through 1/4" | Maximum shank length: 3" | Thread length (maximum): 2" | Production: 200 - 600 PPM | Electrics: 7 1/2 HP AC Motor & Controls | Approx. weight: 5700# | Approx. floor size: 5'2" x 6'8" | E...
Ivyland, PA
Landis 4291 Threading & Tapping
- used
- Manufacturer: Landis
- Model: 4291
Good condition Landis 4291 Threading & Tappings. Located in USA and other countries. Click request price for more information.
USA