+GF+ - GEORG FISCHER PCR
used
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPCR
used
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PRP
used
- Manufacturer: Georg Fischer
Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PFH / GM-246
used
- Manufacturer: Georg Fischer
for direct reading of the surface hardness of compacted green sand molds
Meinerzhagen, Germany
JANKE & KUNKEL MINI-MR
used
- Manufacturer: Janke & Kunkel
Adjustable stirring frequency, 0 - 2,000 rpm, 1.5 W, 220 V, 50 Hz
Meinerzhagen, Germany
RETSCH EM 2200 T
used
- Manufacturer: Retsch
Hotplate, adjustable temperature and stirring frequency, 230 V, 1850 rpm, 630 W
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPDU
used
- Manufacturer: Georg Fischer
- Model: SPDU
for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPDU
used
- Manufacturer: Georg Fischer
- Model: SPDU
for determining the gas permeability, measuring ranges 0 to 50 or 0 to 500 Gd
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPIT
used
- Manufacturer: Georg Fischer
Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPIT
used
- Manufacturer: Georg Fischer
Connected loads 220 V, 50/60 Hz, 250 W, timer 15 min.
Meinerzhagen, Germany
BNIF plates
used
Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case
$1,262 USDMünster, Germany
Karl Deutsch Pocket Leptoscope 2025
used
Product information "Karl Deutsch Pocket Leptoscope 2025" Karl Deutsch Pocket Leptoscope 2025 (coating thickness gauge); second-hand
$763 USDMünster, Germany
Scrata plates - 48 pieces -
used
Product information "Scrata plates - 48 pieces -" Comparison plates for testing surface quality in accordance with DIN EN 1370 The set is composed as follows:- Surface roughness (1-5) - Surface inclusions (1-5) -...
$3,667 USDMünster, Germany
portable hardness tester novotest T-UD3
used
Product information "portable hardness tester novotest T-UD3" portable hardness tester novotest T-UD3 with one probe (either UCI or Leeb) 1kgf (9.8N),, 5kgf (49N), 10kgf (98N) Leeb probe types D, DC, DL, C, D+15,...
$3,403 USDMünster, Germany
Slip cross magnet 42 volts
used
Product information "Helling cross magnet 42 Volt" Helling cross magnet on rollers completely overhauled // - newly potted - ideal testing device for simultaneous longitudinal and transverse fault testing! requir...
$1,168 USDMünster, Germany
Tip: Enter manufacturer, model or keyword