- Trusted Seller
1968 HAEUSLER VRM-HY-3000x12 #0302618
- Manufacturer: Haeusler
- Model: VRM-HY
SPECIFICATIONS: 10' x 1/2" Haeusler Initial Double Pinch Plate Bending Roll Hertz, 3 Phase. Hydraulic Drop End Front & Rear Pressure Gauges E-Stop Controller Stationary
Toledo, OH - Trusted Seller
1978 HAEUSLER VRM-HY 12X1.5 #2000420
- Manufacturer: Haeusler
- Model: VRM-HY
SERIAL WO10554 NEW 1978 MODEL VRM12/3 CAPACITY 1.5" LENGTH 144" ROLLS 4 HYDRUALIC
Toledo, OH 1978 Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
1 1/2" x 12' Four Roll Plate Roll Haeusler VRM-HY Capacity: 1.5" | Overall length of rolls: 12' | Number of rolls: 4 | Top & bottom roll diameter: 23-1/2" | Side rolls diameter: 19" | Plate bending diameter: 28" ...
USA- Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Width between upper and lower roll 200 mm Power 180 kW
Babberich, Netherlands - Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3000 mm | Rolling thickness 3x toproll ø: 120 mm | Rolling thickness 5x toproll ø: 150 mm | Rolling thickness prebending: 100 mm | Top roll ø: 910 + 820 + 740 mm | Bottom roll ø: 940 mm | Si...
Babberich, Netherlands - Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3050 mm | Rolling thickness 3x toproll ø: 60 mm | Rolling thickness 5x toproll ø: 70 mm | Rolling thickness prebending: 50 mm | Top roll ø: 630 mm | Bottom roll ø: 600 mm | Side roll ø: 500 ...
Babberich, Netherlands - Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3000 mm | Rolling thickness 3x toproll ø: 130 mm | Rolling thickness 5x toproll ø: 140 mm | Rolling thickness prebending: 120 mm | Top roll ø: 950 mm | Bottom roll ø: 850 mm | Side roll ø: 1...
Babberich, Netherlands - Trusted Seller
Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
2 rolls are mechanically driven with driveshafts = no slip possible of workpiece Hydraulic upper lower movement of rolls and support bearing
Deinze, Belgium - Trusted Seller
Haeusler VRM HY L4000x6
- Manufacturer: Haeusler
- Model: VRM-HY
Roller roller plate roller, roller Incl. conical bending Incl. hydraulic retraction assist. Videos available for dismantling
Wijchen, Netherlands - Trusted Seller
Haeusler VRM-HY-N 3100 x 20 mm CNC
- Manufacturer: Haeusler
- Model: VRM-HY
Directe 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie.
Deinze, Belgium - Trusted Seller
Haeusler 4RM-hy VRM-hy-1 2000x5
- Manufacturer: Haeusler
- Model: VRM-HY
SN WO 092-N010/1507 Working width 2000 mm Sheet thickness 5 mm Automatic sheet feeding with vacuum suction system and automatic ejection for the rounded sheets
Laucha an der Unstrut, Germany - Trusted Seller
Haeusler Plate Roll Cap. 3000 x 35 mm
- Manufacturer: Haeusler
- Model: VRM-HY
Haeusler Plate Roll Cap. 3000 x 35 mm Max. Plate Thickness by Capacity at a Yield Point Adjustment of the Rolls Top Side: 0-700 mm/Min
Europe - Trusted Seller
HAEUSLER CALENDAR - VRM-HY product code: 31408
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 1,032 times! Don't miss out! HAEUSLER CALENDER - VRM-HY Rolling width: 3050 mm Rolling thickness: 3 top rolls, Ø 60 mm Rolling thickness: 5 top rolls, Ø 70 mm Rolling t...
Mogliano Veneto, Italy - Trusted Seller
HAEUSLER CALENDAR - VRM-HY product code: 31409
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 1,052 times! Don't miss out! HAEUSLER CALENDER - VRM-HY Rolling width 3000 mm Rolling thickness 3x top roll Ø 130 mm Rolling thickness 5x top roll Ø 140 mm Rolling thic...
Mogliano Veneto, Italy - Trusted Seller
HAEUSLER 4-roller calender - VRM-HY product code: 34045
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 244 times! Don't miss out! HAEUSLER 4-Roller BENDING MACHINE - VRM-HY HAEUSLER - VRM-HY Technical Specifications Lamination width 3000 mm Lamination thickness 3x upper ...
Mogliano Veneto, Italy 
Haeusler VRM-HY Sheet Metal Processing
- Manufacturer: Haeusler
- Model: VRM-HY
Good condition Haeusler VRM-HY Sheet Metal Processing available between 1968 and 2007 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
