- Auction
2004 Haas TM-1 Toolroom Mill
used
- Manufacturer: Haas
- Model: TM-1
Lot 90 Haas TM-1 CNC Vertical Toolroom Mill, 30"x12"x16" Travels, CT40 Taper, 10 ATC, Rigid Tap, Coolant Equipped With Haas 32 Bit CNC Control, CT 40 Spindle Taper, 10 Station Automatic Tool Changer, Y/Z - Axis W...
Maiden Rock, WIVisit Auction Website 2001 Haas TM-1
used
- Manufacturer: Haas
- Model: TM-1
HAAS TM-1 CNC VERTICAL MACHINING CENTER (2001) HAAS TM-1 CNC Vertical Machining Center from 2001, used and ready for your precision needs. Features include a 30" X, 12" Y, 16" Z, 7.5 hp, 4,000 RPM, CT/BT 40 taper...
- Trusted Seller
2007 Haas TM-1
used
- Manufacturer: Haas
- Model: TM-1
HAAS CNC TOOLROOM-MILL MODEL: TM-1, S/N: 1059385, NEW: 2007 SPECIFICATIONS: TABLE WORKING SURFACE ................. 10.5" X 47.75" MAXIMUM WORK PIECE WEIGHT ON TABLE .... 1000 LBS TRAVELS: LONGITUDINAL(X) ........
- Trusted Seller
2007 Haas TM-1
used
- Manufacturer: Haas
- Model: TM-1
HAAS CNC TOOLROOM-MILL MODEL: TM-1, S/N: 1059043, NEW: 2007 SPECIFICATIONS: TABLE WORKING SURFACE ................. 10.5" X 47.75" MAXIMUM WORK PIECE WEIGHT ON TABLE .... 1000 LBS TRAVELS: LONGITUDINAL(X) ........
2004 HAAS TM1
used
- Manufacturer: Haas
- Model: TM-1
X axis travel: 30" | Y axis travel: 12" | Z axis travel: 16" | Rapid rate x axis: 200 IPM | Rapid rate y axis: 200 IPM | Rapid rate z axis: 200 IPM | Max table load: 1,000 LBS | Spindle motor: 7.5 HP | Spindle s...
- Trusted Seller
2005 Haas TM-1P
used
- Manufacturer: Haas
- Model: TM-1P
No Tool Changer Coolant Pump Kit Flood Coolant System Work Light Full Sheet Metal Enclosure USB Port Interface RS 232 Port Interface Memory Lock Key Switch 15" Color LCD Monitor Vector Drive Spindle Sin...
North Carolina, USA 
2008 HAAS TM1
used
- Manufacturer: Haas
- Model: TM-1
X axis travel: 30" | Y axis travel: 12" | Z axis travel: 16" | Rapid rate x axis: 200 IPM | Rapid rate y axis: 200 IPM | Rapid rate z axis: 200 IPM | Max table load: 1,000 LBS | Spindle motor: 7.5 HP | Spindle s...
- Trusted Seller
HAAS TM-1P CNC Vertical Machining Center (2019)
used
- Manufacturer: Haas
- Model: TM-1P
Model: TM-1P | X-axis: 30" | 762 mm | Y-axis: 12" | 304.8 mm | Z-axis: 16" | 406.4 mm | Power: 7.5 hp | 5.6 kW | Rpm: 6,000 RPM | # atc: 10 | Taper: 40 | Table-width: 10.5" | 266.7 mm | Table-length: 47.75" | 1...
Missouri, USA - Trusted Seller
2017 Haas TM-1P with Haas Probing System, 4th Axis Drive, Rigid Tapping, Coolant System. ONLY 1737 Cutting Hours
used
- Manufacturer: Haas
- Model: TM-1P
WIPS-R Intuitive Probing-Renishaw Rigid Tapping Visual Part Programming System Spindle Orientation Coordinate Rotation & Scaling User Definable Macros 10 Station Tool Changer 15" Color Monitor 1 MB Progra...
Wisconsin, USA - Trusted Seller
2006 Haas TM-1 w/ 4th Axis Drive, Coolant Syst., Single or Three Phase from Tech School
used
- Manufacturer: Haas
- Model: TM-1
4th Axis Drive & Wiring Coolant System with Tank and Pump G Code Compatible Vector Spindle Drive Direct Belt Drive RS-232 Port / DNC Link 3-Phase or Single Phase Capability 208 Volts 3-Phase 25 Amps Full L...
North Carolina, USA - Trusted Seller
2009 Haas TM-1, Wired for 4th Axis, Single or Three Phase Power, 10 Station ATC, Coolant Pump
used
- Manufacturer: Haas
- Model: TM-1
Wired for a 4th Axis 10 Station Tool Changer Rigid Tapping Coolant Tank with Pump Vector Spindle Drive Direct Belt Drive RS-232 Port / DNC Link 3-Phase or Single Phase Capability 208 Volts 3-Phase 25 Amps...
North Carolina, USA - Trusted Seller
2012 Haas TM-1P
used
- Manufacturer: Haas
- Model: TM-1P
Intuitive Programming Coolant Pump Kit USB Port Work Light Machine is like new, 108 Run Time Hours From a School
Alabama, USA 
2006 Haas TM-1 CNC Mill
used
- Manufacturer: Haas
- Model: TM-1
This Haas TM-1 Toolroom Mill is a rare find, featuring exceptionally low hours and outstanding condition. Known for its precision, simplicity, and reliability, the TM-1 is a top choice for job shops, prototyping,...
Miami, FL
2008 HAAS TM1P
used
- Manufacturer: Haas
- Model: TM-1P
Table Size: Dimensions: haas cnc control X axis travel: 30" | Y axis travel: 12" | Z axis travel: 16" | Rapid rate x axis: 400 IPM | Rapid rate y axis: 400 IPM | Rapid rate z axis: 400 IPM | Max table load: 1,000...
Sanford, FL
2006 HAAS TM1
used
- Manufacturer: Haas
- Model: TM-1
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE INTUITIVE PROGRAMMING SYSTEM USB PORT WORK LIGHT SELF-MADE 3/4 GUARDS AND SLIDING DOOR COOLANT PUMP
Haas TM-1 Milling Machine
used
- Manufacturer: Haas
- Model: TM-1
Good condition Haas TM-1 Milling Machines available between 2001 and 2019 years. Located in Italy and other countries. Click request price for more information.
Italy
Tip: Enter manufacturer, model or keyword
