- Trusted Seller
2006 FRYER EASY TURN ET-14 CNC MANUAL COMBINATION LATHE, 14" x 40"cc, NEW VERY GOOD CONDITION FROM UNIVERSITY
used
- Manufacturer: Fryer
- Model: ET-40
FRYER EASY TURN MODEL ET-14 CNC MANUAL COMBINATION LATHE, 14" x 40"cc, NEW 2006 VERY GOOD CONDITION FROM UNIVERSITY AML Stock #002976 MODEL ET-14 FRYER CNC / MANUAL COMBINATION LATHE, 14" x 40"cc WITH TOUCH 2000 ...
- Trusted Seller
2013 Doosan Puma 300C
used
- Manufacturer: Doosan
- Model: PUMA 300C
Machine type: CNC Lathes | Machine location: Upon Request | Stock #: 377929 | Control: Fanuc Oi Control | Spindle: A2-11 | Spindle motor: 35 hp | Max rpm: 2,800 RPM | Turret: 12 -station turret | Bed type: 45-de...
- Trusted Seller
2013 Samsung SL-20
used
- Manufacturer: Samsung
- Model: SL20
Equipped With: Fanuc 0i-TD Chip Conveyor Tool Presetter Tailstock Parts Catcher
- Trusted SellerAuction
2017 DMG Mori Mdl. NLX2500 700 CNC Lathe
used
- Manufacturer: DMG Mori
- Model: NLX 2500
2017 DMG Mori NLX2500/700 CNC Lathes, 14.4” Maximum Workpiece Diameter, 27.9” Maximum Workpiece Length, 4.1” Bar Diameter, Travels: X-10.2”, Y-4.7”, Z-31.3”, 6,000 RPM Spindle Speeds, Complete with Live Tooling, ...
McHenry, ILVisit Auction Website - Trusted Seller
2011 Hardinge GS-51
used
- Manufacturer: Hardinge
- Model: GS 51
Equipped With: Fanuc Oi-TD Control C Axis Live Tooling Big Bore Spindle Air Chuck Parts Catcher Chip Conveyor Tailstock
- Trusted Seller
1999 Leadwell LTC-30BPL
used
- Manufacturer: Leadwell
- Model: LTC30BPL
Rapid Feed Rate: X-axis: 393 Ipm Rapid Feed Rate: Z-axis: 472 Ipm Equipped With: Fanuc OT Control Tailstock Tool Setter Chip Conveyor Long Bed
- Trusted Seller
1999 Takahashi Microstar TNC-LO2-NCL
used
- Manufacturer: Takahashi
Specifications (subject to buyer verification): Equipped With: Manuals Makino Linear Pallet Pool System (MMC2) -24 pallet pool system -3 setup stations
- Trusted Seller
2013 Haas ST-10
used
- Manufacturer: Haas
- Model: ST-10
Equipped With: Haas CNC Control Tool Presetter Chip Auger All Service Reports
- Trusted Seller
2008 Okuma Mac Turn 550W
used
- Manufacturer: Okuma
Equipped With: Okuma OSP-P200L Control Full Contouring B-Axis Universal Head 15″ Chuck Available Manuals Magnetic Chip Conveyor Multiple sets of misc Jaws Misc sets of different size collets Tool Holders with Too...
- Trusted SellerAuction
Okuma LB35-II CNC Lathe
used
- Manufacturer: Okuma
- Model: LB35 II
Okuma LB35-II CNC Lathe, w/ 12-Position Turret, Approximately 12" Chuck, Tailstock, Chip Conveyor, OSP U100L Controls, S/N: 0694
Mount Pocono, PAVisit Auction Website - Trusted Seller
2011 Hurco TM8
used
- Manufacturer: Hurco
- Model: TM8
EQUIPPED WITH: WinMax CNC Control Conversational Programming Tailstock 10 Position Tool Turret All Available Manuals Under 500 Hours Very Clean & Light Use- From Individually Owned Shop
- Trusted Seller
1999 Mori Seiki CL203
used
- Manufacturer: Mori Seiki
- Model: CL-203
Equipped With: Chip Conveyor Machine type: CNC Lathes | Machine location: Ohio | Stock #: 132101 | Bar capacity: 2.559″ | Chuck size: 8″ | Spindle speed: 3,500 RPM | Spindle motor: 15 HP | X axis travel: 9.25″ | ...
- Trusted Seller
2005 Daewoo Puma 240
used
- Manufacturer: Daewoo
- Model: Puma 240
Equipped with: Chip Conveyor Tailstock Machine type: CNC Lathes | Machine location: Canada | Stock #: 128134 | Chuck size: 10″ | Spindle speed: 4,500 RPM | Spindle motor: 25 / 20 HP | Through bore: 2.6″ | X axis ...
- Trusted Seller
2005 Okuma Okuma
used
- Manufacturer: Okuma
Equipped with: OSP E100L Chip Conveyor Tailstock 2x 24″ 4 Jaw Nobel Chucks Steady Rest
- Trusted Seller
2016 Jyoti TS 120
used
- Manufacturer: Jyoti
Slides Main Spindle No. of spindles 2 Spindle Motor Power – Siemens kw 8.3/5.5 Spindle Motor Power – Fanuc kw 7.5/5.5 Spindle Speed Range rpm 50-4500 Spindle Nose A2-5 Turret Number of Turret 2[16(8+8)] Capacity ...
Tsugami MB38SY CNC Lathe
used
- Manufacturer: Tsugami
- Model: MB38SY
Good condition Tsugami MB38SY CNC Lathes manufactured in 2005. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
