Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Illinois

Building Filters

148

Used Shell And Tube Heat Exchangers in Illinois, USA

  • Tranter GmbH Horizontal Spiral Heat

    Tranter GmbH Horizontal Spiral Heat Exchanger

    • Manufacturer: TranterTranter

    53326001 Unused- Tranter GmbH Horizontal Spiral Heat Exchanger, Total Surface Area 194.9 Square Meter (Effective area 1,980 Square Feet), Carbon Steel. Shell & coil each rated Full Vacuum/24.5 bar (355 psi) at -4...

    Belvidere, IL
  • Trusted Seller
    GOE General Oil Equipment Heat

    GOE General Oil Equipment Heat Exch Tube in Tube 133 GAL

    • Manufacturer: GOE General Oil Equipment

    General Oil Equipment, 133 gallon, stainless steel holding loop. Equipped with 389¾ ft of 3" stainless steel tubing with 3½" OD / 3" ID Tri-clamp style inlet and outlets. Mounted on a stainless steel frame. For a...

    Carol Stream, IL
  • Trusted Seller
    AAN GmbH Type FP-16-3.5/30-EV Vertical

    AAN GmbH Type FP-16-3.5/30-EV Vertical Condenser Heater

    • Manufacturer: AAN GmbH

    AAN GmbH Type FP-16-3.5/30-EV Vertical Condenser Heater Operating temp min/max: Tube side 120C. Shell side 99C. Operating pressure min/max: Tube side 2bar. Shell side 2 bar. Volume: Tube side 103 lt. Shell side 1...

    Illinois, USA
  • Shell & Tube Heat Exchanger,

    Shell & Tube Heat Exchanger, U Tube

    • Manufacturer: Ilsung CorporationIlsung Corporation

    48291061 Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long...

    Belvidere, IL
  • Ellett Industries Shell & Tube

    Ellett Industries Shell & Tube Heat Exchanger.

    • Manufacturer: Ellet MfgEllet Mfg

    50420004 Used Ellett Industries Shell & Tube Heat Exchanger, 930 Square Foot. Horizontal. Single pass. (237) Zirconium (SB-523) 3/4" diameter x 20' long tubes rated 165 psi / FV at -20 to 550 degrees F. 304L Stai...

    Belvidere, IL
  • Southern Heat Exchanger 8500 Sq.

    Southern Heat Exchanger 8500 Sq. Ft. 304L Stainless Horizontal Heat Exchanger – 51" x 26', Built 2019

      53267102 Used Southern Heat Exchanger 8500 Sq. Ft. 304L Stainless Horizontal Heat Exchanger . 51" diameter X 26' face to face length. 304L Shell rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to...

      Belvidere, IL
    • P.X. Engineering U Tube Heat

      P.X. Engineering U Tube Heat Exchanger

      • Manufacturer: PX EngineeringPX Engineering

      31729 Unused- PX Engineering U Tube Heat Exchanger, 4611 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (668) 5/8'' Diameter x 252'' long 304 stainless steel tubes rated 75 psi at 212...

      Belvidere, IL
    • Doyle & Roth 1,824 Sq

      Doyle & Roth 1,824 Sq Ft. Heat Exchanger

      • Manufacturer: Doyle & RothDoyle & Roth

      52052015 Used Doyle & Roth Shell & Tube Heat Exchanger, 1,824 Square Feet. (929) 304 stainless steel .75" diameter x 10' long Tubes rated 86 psi/ FV at 400 degrees F. Carbon steel Shell rated 150 psi at 150 degre...

      $4,500 USD
      Belvidere, IL
    • Ilsung Single Pass Shell &

      Ilsung Single Pass Shell & Tube Heat Exchanger

      • Manufacturer: Ilsung CorporationIlsung Corporation

      48291049 Unused- Single Pass Shell & Tube Heat Exchanger, Approximate 8254 Square Feet, Tema Type AEL, Horizontal. Carbon steel shell rated 527psi/Full Vacuum at 230 degrees F. (1952) 3/4" diameter x 264" long 22...

      Belvidere, IL
    • 2,400 Square Feet Alfa Laval

      2,400 Square Feet Alfa Laval Spiral Heat Exchanger

      • Manufacturer: Alfa-Laval
      • Model: 1-H

      45655006 Used Alfa Laval Thermal Horizontal Spiral Heat Exchanger, 2400 Square Feet, Model 1-H. 316 Stainless steel product contact areas. Hot and cold side rated 125 psi at 250 degrees F. Carbon steel removable ...

      Belvidere, IL
    • Doyle and Roth Vertical Shell

      Doyle and Roth Vertical Shell and Tube Heat Exchanger.

      • Manufacturer: Doyle & RothDoyle & Roth

      52862012 Used Doyle and Roth Approximate 20.2 Square Feet Vertical Shell and Tube Heat Exchanger. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes...

      $6,500 USD

      Get financing

      Est. $128/mo

      Belvidere, IL
    • Cataract Steel Industries Shell and

      Cataract Steel Industries Shell and Tube Heat Exchanger

        52862014 Used Cataract Steel Industries Shell and Tube Heat Exchanger, Model SG-33006-SETT, Approximate 21.2 Square Feet. Carbon steel shell rated 60 psi at -20 to 300 degrees F. (27) 3/4" diameter x 48" long 316...

        $4,500 USD
        Belvidere, IL
      • Groen DR1218 Scraped Surface Heat

        Groen DR1218 Scraped Surface Heat Exchanger/ Evaporator

        • Manufacturer: Groen

        52304001 Used Groen Scraped Surface Heat Exchanger/ Evaporator, Model DR 1218, 304 Stainless Steel. Approximate heat surface area 9.5 square feet. Approximate 12" diameter x 18" long, with (3) scrapers. Internal ...

        Belvidere, IL
      • Trusted Seller
        Vertical Condenser Heater

        Vertical Condenser Heater

        • Manufacturer: Unknown

        Vertical Condenser Heater Calentador De Condensador Vertical

        Illinois, USA
      • Industrial Process Equipment Corp Shell

        Industrial Process Equipment Corp Shell & Tube Heat Exchanger.

        • Manufacturer: Industrial ProcessIndustrial Process

        52046002 Used Industrial Process Equipment Corp Shell & Tube Heat Exchanger, Model 4ST14-72, 316 Stainless Steel. Approximate 129.6 square foot. 316 Stainless steel shell rated 50 psi/FV at -20 to 250 degrees F. ...

        Belvidere, IL
      34567

      Overview

      Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

      FAQ

      What factors should I consider when purchasing a heat exchanger?

      Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

      How can I ensure my heat exchanger is shipped safely?

      Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

      What maintenance is required for a heat exchanger?

      Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.