Used Processing in Flanders, Belgium

Atlas-Copco GA18 + FD506

• Manufacturer: Atlas-Copco
• Model: GA 18+

Motor: 18.5 kW Start Amps: 84.9 Amps / Full load: 36.4 Amps

Atlas-Copco GA90VSD + FD230

• Manufacturer: Atlas-Copco
• Model: GA 90

tank 2000 liter capacity: 16,2 m3/min pressure: 7,5 bar power: 90 kW with FD230 air dryer

Andouart Ø 26 mm

• Manufacturer: Andouart

Extrusion of plastic tubes max Ø 26 mm screw Ø 60 11 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here S...

Andouart Ø 26 mm

• Manufacturer: Andouart

extrusion of plastic tubes or profiles Max Ø 26 mm Screw Ø 60 14 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81...

Future Controls Ms-101 Injection mold-testing device

• Manufacturer: Future Controls Ms-101

Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould. mounted on mobile table incl accessories pressure: 4-6kg/cm2

Netstal N235-90MP injection moulding

• Manufacturer: Netstal

klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap

SALVAMAC COMPACT ECO 4 XL ATEX Stand-alone dust extractor

• Manufacturer: Salvamac
• Model: Compact

Fully enclosed pressure filter for indoor use Capacity: 6000 m3/h Motor 5,5 kW Sleeves: 16 Length x diameter of the sleeves: 1500 x 180 mm Collection in plastic bags, 4 x diam. 500 mm Inlet of 250 mm diameter ATE...

EXS-600 Packaging equipment

Semi-automatic Year of construction: Tension: 220V 50Hz 1Ph

2006 X.PAUCHARD X 3965 Air compressor

Volume: 2000l Gas: air Max pressure: 10.7 bar Max temp: -15/55°C Tension:

2008 ATLAS COPCO GA30 VSD Air compressor

• Manufacturer: Atlas-Copco
• Model: GA 30

Max pressure: 12.8 bar Max flow rate: 4.58 m³/min /76.4l/s Engine power: 30kW Engine speed: 7200 r/min Last maintenance: 04/10/24 with 20717 running hours

2022 BAUGER KS500K30E Air compressor

Power: 7.5 HP Sucked flow rate: 850L/min Max pressure: 11 bar Dryer: DRYLPE-54 R134a TS: 10-120°C

1999 NOVOPAC ANL 070 Packaging equipment

Max opening width: 660mm Table height: 850mm Max packing height: 380mm Motor + Shrink Tunnel BM1407 Inlet tunnel: 700mm

2011 AREA RING 40 Packing machine

Ring diameter: 400mm Maw winding speed: 300rpm Automatic film applying and removing

2016 CONTIMAC DRYER 950 Air compressor

Air flow rate: 950 l/min Nominal air inlet pressure: 7 bar Nominal inlet air temperature (max): 35°C Max inlet air pressure: 16 bar Pressure drop: 0.09 bar Connections (inlet-outlet): G1/2'' Refrigerant type: R13...

NAZZARENO COSTRUZIONI FORCE... Briquetting press

• Manufacturer: Kracht

Compact briquetting press in with silo incorporated Capacity: 150 to 200 kg/hour Briquette sizes: 70 mm diameter Main motor: 2 x 11 kW Silo diameter: 900 mm. Total power installed: 26,5 kW Overall sizes: 2,10 x 2...