Machine Tools » Grinding machines » Mie

Building Filters

Related Events

Live Now

(New) Industrial Metalworking Equipment From Rogers Corporation

by AllSurplus

Online
Ends Sep 10th, 14:00 CDT
View event
27

Used Grinding Machines in Mie, Japan

  • Precision Surface Grinder [overhaul machine]

    Precision Surface Grinder [overhaul machine]

    • refurbished

    • Manufacturer: Okamoto
    • Model: PSG-52

    [Overhaul machine] ◆Whetstone: Outer diameter 205 x Thickness 19 x Hole diameter 50.8mm ◆Whetstone no-load rotation speed: (50/60Hz) 3000/3600rpm ◆200/220V ◆50/60Hz ※Whetstone rotation inverter stepless cont...

    Mie, Japan
  • 1977 NICCO NSG-550B

    1977 NICCO NSG-550B

    • used

    • Manufacturer: NICCO
    • Weight: 80kg

    â—† Rotation speed (50Hz) 2,800rpm / (60Hz) 3,400rpm â—† Grinding wheel: Diameter 180 x Thickness 6-32 x Hole diameter: 31.75mm

    Mie, Japan
  • Nagase SGH-600

    Nagase SGH-600

    • used

    • Manufacturer: Nagase
    • Weight: 1.5 ton

    Motor 2.2 kW + 1.5 kW + 40 W; 9.8 A + 6.3 A + 0.23 A Electricity 220 V 3 Phase 0.005 Per Up Down Division 0.05 Per Cross Division

    Mie, Japan
  • 1974 Kuroda GS-BM

    1974 Kuroda GS-BM

    • used

    • Manufacturer: Kuroda
    • Model: GS-BM

    ◆ Tiltable permanent magnet chuck GSM-2 ・ 100 × 300 ◆ With dust collector ◆grindstone shaft speed 2800rpm

    Mie, Japan
  • Brown & Sharpe 612 Micromaster

    Brown & Sharpe 612 Micromaster

    • used

    • Manufacturer: Brown & Sharpe
    • Model: Micromaster

    —† table: 350 X 100

    Mie, Japan
  • 1997 Okamoto PSG-52DX

    1997 Okamoto PSG-52DX

    • used

    • Manufacturer: Okamoto
    • Model: PSG-52

    â—† FX power supply, spindle rotating inverter, overhead dress, front and rear axis digital

    Mie, Japan
  • Diapet DP-620

    Diapet DP-620

    • used

    • Manufacturer: Diapet
    • Weight: 450kg

    â—† Tool length (Ball end mill) Total length 235 / (End mill) 300

    Mie, Japan
  • 1995 KENT KGS-410AHD

    1995 KENT KGS-410AHD

    • used

    • Manufacturer: Kent
    • Model: KGS-410AHD
    • Weight: 3800kg

    â—†With magnetic separator â—†full automatic —† table work surface: 1060 × 410 | —† table size: 3020 × 504 | —† grindable area: 1050 × 420 | —† wheel axis rotation speed (60hz): 1740rpm | —† wheel dimensi...

    Mie, Japan
  • 1996 Hitachi GHL-B409NS

    1996 Hitachi GHL-B409NS

    • used

    • Manufacturer: Hitachi
    • Model: GHL-B409NS
    • Weight: 3800kg

    —† table work surface: 900 × 400 | —† wheel axis rotation speed (60hz): 1800rpm | —† machine body weight: 3800kg

    Mie, Japan
  • 1985 Kuroda GS-CHA

    1985 Kuroda GS-CHA

    • used

    • Manufacturer: Kuroda
    • Weight: 1500kg

    â—† XY: Hydraulic feed Z: Automatic cutting —† rated voltage: AC200V | —† table dimensions: 550 × 200 | —† chuck dimensions (flat type): 500 × 200 × 90mm | —† no-load rotation speed: 1800m / min | —† whe...

    Mie, Japan
  • 1977 Nagase SGW-4

    1977 Nagase SGW-4

    • used

    • Manufacturer: Nagase

    â—† Stroke (X, Y, Z): S: X470, Y270 —† rated voltage: AC200V | —† table dimensions: 450 x 200 | —† chuck dimensions (flat type): 450 x 150 | —† notch specifications: XY automatic | —† with or without dresser...

    Mie, Japan
  • 1973 Toyoda GUS-30-50

    1973 Toyoda GUS-30-50

    • used

    • Manufacturer: Toyoda
    • Weight: 2,200kg

    —†swing: 300 | —† center distance: 500 | —†maximum grinding diameter: 280 | —†wheel size: 355 x 50 width x 127 inside diameter | —†center: MT No.4 | —† spindle hole diameter: 27mm | —† spindle speed: 20 ~...

    Mie, Japan
  • 1985 Toyoda GUP32×50

    1985 Toyoda GUP32×50

    • used

    • Manufacturer: Toyoda
    • Model: GUP3250
    • Weight: 2,900kg

    â—† MT No.4 —† swing on the table: 320 | —† distance between centers: 500 | —† whetstone: Outer diameter φ355 x Width 50 x Inner diameter φ127 | —† spindle rotation speed: 16-500rpm | —† required floor are...

    Mie, Japan
  • 1971 Mizuguchi GU-650

    1971 Mizuguchi GU-650

    • used

    • Manufacturer: Mizuguchi

    â—† Rated voltage 200V —† no-load rotation speed: 1750min-1 | —† whetstone dimensions: outer diameter 355φ x width 75 x inner diameter 152.4φ

    Mie, Japan
  • 2000 OKAMOTO PSG-84EN Surface Grinder

    2000 OKAMOTO PSG-84EN Surface Grinder

    • used

    • Manufacturer: Okamoto
    • Model: PSG-84

    chuck:800*400, stroke:X950Y440, Dust collector magnet separator, grinding wheel balancer

    Mie, Japan
12

Overview

Grinding machines are essential tools for metalworking and material finishing. They use abrasive wheels to remove material from a workpiece, providing a high-precision finish. These machines come in various types, including surface, cylindrical, and tool and cutter grinders, making them suitable for a wide range of industrial applications.

FAQ

What should I consider when buying a used grinding machine?

Check the machine's overall condition, the wear on the grinding wheel, and the accuracy of the spindle. Review any maintenance records and ensure the machine meets your specific needs.

How do I ensure the grinding machine is shipped safely to my location?

Use a specialized transport service for heavy machinery, ensure the machine is properly secured, and protect sensitive components during transit.

What is the maintenance schedule for a grinding machine?

Regular maintenance involves checking and replacing the grinding wheel, lubricating moving parts, and inspecting electrical connections. Refer to the manufacturer’s manual for detailed maintenance intervals.