Used Processing in Wallonia, Belgium

Pneumatic needle hammer

Small dust collector, 1,1 kW

• Manufacturer: ERNST SCHMIDT

Filter surface ± 2m² Intake manifold, Ø 100mm With switch With dust drawer

Core sand mixer VOGEL + SCHEMANN, 50 l

• Manufacturer: Vogel & Schemann

External dimensions: length 900mm, width 650mm, height 1140mm For charges of 50 l = 75 kg max. With manuel door and protections Extra charge for pneumatic door

2008 Dust collector LÜHR, ± 15 000 m³/h

• Manufacturer: Lühr

Type Df2,1/1,5/1,5 With exhauster and silencer Pneumatic filter cleaning Filter surface, ± 90m² 198 flat filter elements With new feet, cone and flap New platform New control board

Magnetic manuel crack detector TIEDE

• Manufacturer: Tiede

With cable and plug Weight: ± 5 kg | External dimensions: length 300mm, width 45mm, height 180mm | Useful dimensions: length 165mm, height 120mm | Motor: 220 V single-phased

Magnetic manuel crack detector TIEDE

• Manufacturer: Tiede

With cable and plug Weight: ± 5 kg | External dimensions: length 300mm, width 45mm, height 180mm | Useful dimensions: length 165mm, height 120mm | Motor: 220 V single-phased

Permeability tester GF, type PDU

Weight: ± 5 kg | Dimensions: length 410mm, width 235mm, height 480mm

2008 Treatment ladle FOUNDRY SERVICE, 2 t

External dimensions: length 2150mm, width 1550mm, height 2650mm Treatment ladle with planetary gearbox With heat protection With excellent lining With special spout

2 complet turbines for shot blast with motor G+F, Ø 495mm

• Manufacturer: GF WHEELABRATOR

With motor With 7 slots Weight: ± 400 kg/pc | Motor: 2x 15 kW, 400 V | Output: ± 230 kg shot per turbine and minute

KUKA robot, CE

• Model: KR 240

First arm length 1250mm Second arm length 1000mmm With control board With protective grids With roller conveyor With gripper

1989 Automatic core sand mixing line STEFFENS

core send mixing plant for cold box smal vibrating convoyor for additifs and intensity regulations Volume testing device Storrge hopper ±250l Pneumatic discharge flap with inspection window and filling level prob...

2008 Treatment ladle FOUNDRY SERVICE, 1 t

Dimensions: largeur 1583mm, upper Ø 850 mm, lower Ø 700mm, total height 2465mm Planetary gearbox RSD80V, n° 42791/0001 Dimensions: - Ø 850/700mm - height 1250mm - total height 2465mm Lining is as good as new (unu...

2006 Green sand mixer WEBAC with accessory, 28 t/h

• Manufacturer: Webac

The capacity depends on the quality of the bentonite and of the sand Three-phase-motor, type 280M4 2 mixing runners Accessories: -water control SENSOR CONTROL FRS-M -sand scale -elevator -injection system

Overband magnet, width 800mm, 2,2 kW

• Manufacturer: Wagner

220 V-DC 2200 W cold / 1600 W warm 10 A cold / 7,1 A warm Between axles 1700mm Drum Ø 310mm Drive over 3 V-belts With one new cleated belt

Induction furnace INDUCTOTHERM VIP350, 500 kg

• Manufacturer: Inductotherm

Internal dimensions (without refractory): Depth: 730mm; Ø620mm With hydraulic unit Without cooling tower With water pump With 2 crucibles for alternative working With copper rails One crucible without lining