Used Processing in Utrecht, Netherlands

Rannie 50.79 Blue Top Milieu

• Manufacturer: Rannie

2 stage, manual pressure control, 3 pistons, Piston diameter: 50mm, stroke: 79mm, Stainless steel cladded in sound proof box ＜80dB, Connections: 2" Din, current motor power: 37KW and maximum pressure in curren...

1988 Stork Sterideal

• Manufacturer: Stork
• Model: STERIDEAL

Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10,0 bar, design temperature: -10/110°C, test pressure (Gauge): 13.0 bar

1997 Schröder WK250/2000-xz

• Manufacturer: Schroeder

Reconditioned Scraped Surface Heat Exchanger, only the tube still has to be renewed, cannot be repaired anymore. 1 Cylinder to heat the product (± 35°C-＞85°C) by steam. Steam directly on jacket with steam regulat...

1995 Ampack Ammann RM 3/2

• Manufacturer: Ammann

Rotary filler, with 6 Heads, cup size rectangular 6-pack: 146 x 195 mm. Format per cup rectangular: 73 x 65mm. Could also run a 4 pack with this format. Stations: Cup destacking, Pre-doser (100-400ml), Main-doser...

Transport conveyor

Transport conveyor: Belt length 125 cm / width 20 cm / height 96 cm - Total dimensions 128 x 49 x 100cm.

N.N. Belt conveyor

• Manufacturer: N.N.

Double conveyor belt on top of each other, length.. Width…, type of belt…., built in engine.

2007 GTI Suez

• Manufacturer: GTI

Sterile / Aseptic designed tank, with a magnetic (no seal) propellor agitator, 0.55 kW speed: n2 175 rpm, work pressure in tank up to 3 bars, (protected by break plate on 3.15bar), thank tank is insulated on top,...

Insulated tank

Insulated tank with 'U' shaped agitator - 0.75 kW - 28 rpm - 2.2 A. Flat to the side, product Outlet DIN. With pneumatic valve on top, pneumatic bottom valve, outlet height: . On top of the tank a pt-100 temp sen...

2008 Tetra Pak MS10-SR

• Manufacturer: Tetra Pak
• Model: MS10SR

Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.

Ampack Ammann pre doser 4-line

• Manufacturer: Ammann

Pre doser for of Ampack Ammann AA4 filling machine, pneumatic driven ± 20-80cc

Cryovac Onpac 2000

• Manufacturer: Cryovac

Vertical Form, fill, seal, machine, for big pouches/bags for hot fill, model number RC2000B, DIAG number PEHOE026, serial number 0067, 3 phase, 230 volts, 60 Hz, air 30 CFM, 90 PSI, 5000 Amps, all stainless steel...

Air Solution Industrial AS400

Air solution system for clean air inside the machine. Used for cleaning air inside Ampack Ammann KF1 / 3 cup filling and sealing machine.

Hamba KVS

• Manufacturer: Hamba

Main doser, 8-head, previously used on a Hamba 8-line cup filling machine. Volume of dosing per stroke: 200-500 ml. Heart-heart distance between nozzles: 100,1mm (4"). Negative filling nozzle. Total dimensions (L...

Handtmann

• Manufacturer: Handtmann

Hopper, inner dimensions or hopper diameter top diameter 750mm, height 450mm down flange connection outer diameter 222mm inner diameter 145mm used on a handman vacuumfiller