Used test instrumente in Dublin, Ireland

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

EMCO 3115

• Manufacturer: Emco

Details The Emco 3115 Antenna is a linearly polarised broadband double ridged guide antenna covering 1 GHz to 18 GHz. It offers excellent gain, stable VSWR, and supports up to 300 W continuous power with 500 W pe...

Schaffner CDN110

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN110 is a single-phase surge coupling/decoupling network designed for use with the NSG651 High Energy Pulse Generator. It enables coupling of pulses up to 6.6 kV (1.2/50 µs waveform) or su...

Schaffner NSG 651

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG651 Telecom Surge Generator delivers hybrid pulses of 1,2/50 µs up to 6,6 kV and 8/20 µs up to 3,3 kA, addressing IEC 801-5, ANSI‑IEEE C62.45 and VDE 0109 requirements. It also provides t...

Keysight Technologies U2004A

• Manufacturer: Agilent - Keysight

Details The Keysight (Agilent) U2004A USB Power Sensor offers an extensive frequency range from 9 kHz to 6 GHz and a wide dynamic range of -60 to +20 dBm. Its internal zeroing capability removes the need for exte...

Teseq NSG4070C-35

• Manufacturer: Teseq - Schaffner

Details The Teseq NSG4070C-35 Test System For Conducted And Radiated Immunity is a versatile immunity test system designed for precise conducted and radiated immunity testing across various frequency ranges. It s...

Schaffner NSG 203A

• Manufacturer: Teseq - Schaffner

Details The Keysight (Agilent) Teseq Schaffner NSG203A plug‑in module is engineered to precisely simulate short‑term line voltage variations and complete failures. When shifting from a high voltage (e.g. 150 V) t...

Teseq (Schaffner) NSG 3060

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-3060 is a modular, expandable immunity test system capable of generating surge voltages up to 6.6 kV for overtesting. It integrates IEC and ANSI coupling methods and features a 7″ ...

Huntron PROTRACK

• Manufacturer: Huntron

Details The Huntron ProTrack is a modular test platform that integrates advanced analog signature analysis with PC-based control, offering precise and repeatable diagnostics. Its design supports automation with r...

Teseq NSG3040

• Manufacturer: Teseq - Schaffner
• Model: NSG 3040

Details The Teseq NSG3040 Immunity Test Multifunction Generator is a modular, expandable EMC system designed for high-precision immunity testing. Capable of surge voltages up to 4.4 kV, EFT/Burst up to 4.8 kV, an...

Rohde & Schwarz FSET22

• Manufacturer: Rohde & Schwarz

Details The Rohde & Schwarz FSET22 Test Receiver offers a frequency range from 100Hz to 22GHz, delivering high sensitivity and precise spectrum analysis for advanced testing applications. It supports wide dynamic...

Rohde & Schwarz ESRP7

• Manufacturer: Rohde & Schwarz
• Model: ESRP

Details The Rohde & Schwarz ESRP7 EMI Test Receiver offers a frequency range from 9 kHz to 7 GHz, designed for efficient and precise electromagnetic interference (EMI) measurements. It supports fast precompliance...

Solar 9354-1

Details The Solar 9354-1 is a precision transient limiter engineered to safeguard EMI receivers and spectrum analyzers from damaging conducted disturbances during compliance testing. Designed for use with LISNs, ...

Haefely AXOS8

• Manufacturer: Haefely

Details The Haefely AXOS8 is an advanced EMC test generator designed to combine surge, EFT/Burst, dips, and harmonics in a single modular platform. With compliance to IEC/EN 61000-4 standards, it ensures reliable...