Processing » Granulators & Pelletizers

Search By Manufacturer

Search By Country

Building Filters

6756

Used processing

  • PALLMAN 4-7.5 RUBBER GRANULATOR 18882

    PALLMAN 4-7.5 RUBBER GRANULATOR 18882

    • Manufacturer: Pallmann

    Pallman “Ultra-Granulator” type PS, series C knife mill. Model 4-7.5. 20″ x 29.5″ feed throat entrance (510 mm x 750 mm). 400 mm diameter guillotine style rotor with three (3) rotating knives and two (2) fixed be...

    Elk Grove Village, IL
  • GALA #5 PELLETIZING SYSTEM 18892

    GALA #5 PELLETIZING SYSTEM 18892

      One used Gala Underwater Model 5 Pelletizing system. S/N 880286. Includes #5DMUP cutter head with die and water box, free standing panel with controls and 20 GPM water system with Model 8.2 spin dryer. Manufactur...

      Elk Grove Village, IL
    • CUMBERLAND 1456i CUTTING CHAMBER ONLY

      CUMBERLAND 1456i CUTTING CHAMBER ONLY 18871

      • Manufacturer: Cumberland

      One used Cumberland model 1456i cutting chamber only. S/N 84000-02001. 14″ x 56″ feed throat. Three (3) knife twin shear rotor having six (6) fly knives and four (4) bed knives. Solid v-belt pulley mounted on the...

      Elk Grove Village, IL
    • REDUCTION ENGINEERING PULVERIZER 18836

      REDUCTION ENGINEERING PULVERIZER 18836

      • Manufacturer: Reduction Engineering

      One (1) used Reduction Engineering model 75 single mill Pulverizer. S/N 235. Driven by a 30 HP 230/460-VOLT 3530 RPM motor. Includes Eriez vibratory feed, cyclone with 6″ inlet, and 2.5 HP 36″ Midwestern model MR...

      Elk Grove Village, IL
    • REBUILT RAPID 400-60 DUAL FEED

      REBUILT RAPID 400-60 DUAL FEED 18842

        Rapid model 400/60 granulator. S/N RA-650.242239.10.1. 14″ x 24″ feed throat. 5 knife open rotor with 3 bed knives. 25 HP 460-volt 1800 RPM drive motor. Pre-cut type cutting chamber. Dual Rapid RFL18 feed roll in...

        Elk Grove Village, IL
      • CUMBERLAND 1524B GRANULATOR 18793

        CUMBERLAND 1524B GRANULATOR 18793

        • Manufacturer: Cumberland

        Cumberland model 1524B granulator. S/N 58500-802. 15″ x 24″ cutting chamber. 3 knife steep angle rotor with 2 bed knives. 40 HP 230/460-volt 1775 RPM motor. Top feed box hopper with blow in. 6″ OD airveyor discha...

        Elk Grove Village, IL
      • ORENDA LAB PULVERIZER 18622

        ORENDA LAB PULVERIZER 18622

        • Manufacturer: Orenda

        One (1) used Orenda laboratory pulverizer having two (2) 10″ diameter double faced discs. S/N 10273. Single mill design. Eriez model 15A vibratory feeder. S/N 203560. 110/1/60. 7.5 HP belt drive on mill.. Base me...

        Elk Grove Village, IL
      • CUMBERLAND 184 GRANULATOR 5531

        CUMBERLAND 184 GRANULATOR 5531

        • Manufacturer: Cumberland

        Cumberland model 184 granulator, S/N 235150-85555. 8″ x 10″ feed throat, 3 knife open rotor, 2 bed knife, 5HP 230/460V motor. Insulated hopper and body panels, tray feed hopper, bin discharge. Mounted on casters ...

        Elk Grove Village, IL
      • CUMBERLAND 2050H HOG GRANULATOR 18724

        CUMBERLAND 2050H HOG GRANULATOR 18724

        • Manufacturer: Cumberland

        Cumberland model 2050H granulator. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. No in-feed hopper. 160mm rotor bearings with air purge. Belt d...

        Elk Grove Village, IL
      • CUMBERLAND 1456i GRANULATOR W/FEED ROLLS

        CUMBERLAND 1456i GRANULATOR W/FEED ROLLS 18718

        • Manufacturer: Cumberland

        One (1) used Cumberland model 1456i granulator. S/N 8400-81004. 14″ x 56″ feed throat. Three (3) knife twin shear rotor with two (2) bed knifes. Rotor is belt driven by a 75 HP motor. 68″ wide in feed pull rolls ...

        Elk Grove Village, IL
      • CUMBERLAND #6 PELLETIZER 18624

        CUMBERLAND #6 PELLETIZER 18624

        • Manufacturer: Cumberland

        One (1) Used 6″ Cumberland “Quietizer” pelletizer. 16 knife rotor with bolt on blades. Sound deadening hood. Air actuated nip rolls. 5 HP 230/460-volt inverter duty A/C motor with Automation Direct inverter. Poly...

        Elk Grove Village, IL
      • SEM / NELMOR G1220M1P GRANULATOR

        SEM / NELMOR G1220M1P GRANULATOR 18498

        • Manufacturer: Nelmor

        SEM model 22 granulator (Nelmor G1220M1P S/N 9301-32391) 12″ x 20″ feed throat. 3 knife solid rotor, 2 bed knife. 20 HP 208-230/460-volt motor. Tray feed hopper with sound enclosure. 4″ OD right hand airveyor dis...

        Elk Grove Village, IL
      • CALIFORNIA PELLET MILL CONDITIONER 17333

        CALIFORNIA PELLET MILL CONDITIONER 17333

        • Manufacturer: California Pellet Mill

        One (1) California Pellet Mill conditioner for use with a pellet mill. Mixing section measures approximately 28″ in diameter x 8′ long. Unit is belt driven by approximately a 15 HP motor through a gear reducer

        Elk Grove Village, IL
      • REBUILT NELMOR G3030HD GRANULATOR 18484

        REBUILT NELMOR G3030HD GRANULATOR 18484

        • Manufacturer: Nelmor

        Nelmor model G3030HD granulator. S/N 9606-37721. 30″ x 30″ feed throat. 5 knife rotor with knife carriers, 2 bed knife. Dual Fly-wheels. Tangential cutting chamber. 100 HP 230/460-volt 1181 RPM motor. Insulated l...

        Elk Grove Village, IL
      • CUMBERLAND SIZE 8 PELLETIZER 18477

        CUMBERLAND SIZE 8 PELLETIZER 18477

        • Manufacturer: Cumberland

        One (1) used 8″ Cumberland “Quietizer” pelletizer having a forty eight (48) knife helical rotor. S/N 264550-98005. Factory sound suppression enclosure. Air actuated top rubber roll. Rotor and pull rolls are belt ...

        Elk Grove Village, IL
      4041424344

      Overview

      Granulators and pelletizers are essential machines in the plastics and recycling industry. They are used to transform waste plastic and other materials into small, uniform granules or pellets that can be easily reprocessed or utilized in manufacturing new products. These machines help in reducing waste, improving material handling, and increasing the efficiency of recycling processes.

      FAQ

      What should I consider when buying a used granulator or pelletizer?

      Consider the machine's age, condition, capacity, and the type of materials it can process. Check for maintenance records and look for signs of wear or damage.

      How do I ensure the granulator or pelletizer is shipped safely to my location?

      Use a reputable transport service that specializes in heavy machinery. Ensure the machine is properly secured and protected during transit to prevent any damage.

      What is the maintenance schedule for a granulator or pelletizer?

      Regular maintenance includes checking and replacing blades or cutting tools, lubricating moving parts, and inspecting the machine for any wear or damage. Consult the manufacturer’s manual for detailed maintenance intervals.