- Trusted Seller
2017 Goodway GS-2000YS
- Manufacturer: Goodway
- Model: GS-2000YS
MACHINE EQUIPPED WITH Chip conveyor Oil chiller Parts catcher Renishaw tool setter HPMA Goodway 12 station built-in motor live tooling turret CS-axis with disk brake on main & sub spindles (live sub spindle) Live...
Chicago, IL - Trusted Seller
2017 Goodway GS-2000YS
- Manufacturer: Goodway
- Model: GS-2000YS
Chip conveyor Oil chiller Parts catcher Renishaw tool setter HPMA Goodway 12 station built-in motor live tooling turret CS-axis with disk brake on main & sub spindles (live sub spindle) Live Y-Axis Bar feeder int...
Chicago, IL - Trusted Seller
2018 Goodway GLS-3000YS LESS THAN 100 CUT HOURS
- Manufacturer: Goodway
GOODWAY (YAMA SEIKI) GLS-3000YS NEW: 12/2018 ***** UNDER 100 CUT HOURS OF USE *****
Harrison, NJ - Trusted Seller
2016 Goodway GLS-200 CNC Lathe ()
- Manufacturer: Goodway
Imperial Metric Goodway GLS-200 CNC Lathe (2016) Max swing diameter: 19.685" | Swing over saddle: 12.205" | Max turning diameter: 11.024" | Max turning length: 19.685" | Standard chuck size: 203.2 mm | Standard b...
Elk Grove Village, IL - Trusted Seller
Elk Grove Village, IL 2021 Goodway GA-3300M
- Manufacturer: Goodway
- Model: GA-3300M
CNC Lathe Used Goodway GA-3300M (2021) CNC Lathe for Sale. This pre-owned Goodway CNC lathe is located in The United States and available to be seen under power for an inspection. If you have any questions rega...
USA- Trusted Seller
GOODWAY GW-1440 #85526
- Manufacturer: Goodway
- Model: GW-1440
- Spindle bore: 38.1 mm
Swing over bed: 14 inches | Swing in gap: 23 inches | Swing over cross slide: 8.25 inches | Distance between centers: 40 inches | Spindle bore: 1.5 inches | Spindle speeds: (12) 83 to 1,800 RPM | Spindle nose: D...
Ames, IA 
2020 GOODWAY GLS3300Y
- Manufacturer: Goodway
FANUC 0i-TF Chip Conveyor Tool Presetter Tailstock Parts Catcher Live Tooling Y Axis FANUC 0i-TF G-LINK 350 SOFTWARE 19'' COLOR LCD OIL SKIMMER COOLANT PUMP 7 BAR 12'' (3 JAW) CHUCK WITH 1 SET EACH OF SOFT & HARD...
,- Trusted Seller
Goodway GW- 1640
- Manufacturer: Goodway
16"/24" x 40" goodway GW- 1640, Used #A5996 Capacity: 16"/24" x 40" | Swing over bed: 16" | Swing in gap: 24" | Swing over cross slide: 10" | Distance between centers: 40" | Spindle speeds (12): 55- 1,800 RPM | ...
- Trusted Seller
Goodway GW- 1640
- Manufacturer: Goodway
16"/ 24" x 40" Used Goodway Engine Lathe, Mdl. GW- 1640, 4 Jaw Chuck, Steady Rest, Tool Post, Coolant System, Horsepower: 5, Foot Brake, #9517
2007 Goodway GA-2800 CNC Lathe
- Manufacturer: Goodway
Swing diameter: 580 mm; Swing over saddle: 400 mm Speed range 35–3,500 rpm 11 kW continuous power (15 kW peak) Features & Construction Turret: 12-station AC-servo indexing; optional live tooling (ER32, up to 4 kW...
Poole, United Kingdom- Trusted Seller
2018 Goodway GLS-150
- Manufacturer: Goodway
This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM a...
Germany - Trusted Seller
Goodway - GTS 150-MMX
- Manufacturer: Goodway
- Spindle bore: 33 mm
Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Double Chuck 168 mm ?
Babberich, Netherlands - Trusted Seller
2015 Goodway GTZ-2600Y
- Manufacturer: Goodway
- Model: GTZ-2600Y
- Spindle bore: 76 mm
Equipped with: LNS Alpha short bar loading magazine. 3-jaw chuck. Hainbuch collet chuck. Renishaw tool measurement for both turrets. Tool holder package. Coolant system. High pressure coolant pumps made by Grundf...
Celle, Germany - Trusted Seller
2016 GOODWAY SW 42
- Manufacturer: Goodway
- Model: SW 42
Control: FANUC Series 31i-MODEL B | Max. turning diameter: 42 mm | Workpiece length max.: 110 mm | From: 500 t/min | Up to: 6000 t/min | C axis (spindle,resolution): 0.01 ° | Number of tools: 5 | Number of drive...
Brügg, Switzerland
Tip: Enter manufacturer, model or keyword
