Dual Melter
new
- Manufacturer: Balti AG
Dual systems are used for the processing of two identical or different adhesives with sometimes different containers. E.g. two different reactive hotmelt or one of them non-reactive etc. The big advantage, in con...
Baar, Switzerland
Bag Melter
new
- Manufacturer: Balti AG
The balti bag melters were developed especially for reactive adhesives. Thanks to absolute tightness from the melting plate to the outlet at the application head, the sensitive adhesive is protected from external...
Baar, Switzerland
Coating Systems
new
Coating with hotmelt in a continuous process of continuous material from a roll is called balti, restricting and not quite correct, a coating plant. More information about coating with roller or spray process wit...
Baar, Switzerland
Laminating Systems
new
- Manufacturer: Balti AG
A laminating line is basically an extended coating line. In most cases, a second unwinding roll is used to laminate a further material directly after the adhesive application. By means of a laminating roller with...
Baar, Switzerland
Slot Nozzle
new
- Manufacturer: Balti AG
Adhesive is applied to a substrate with a slotted nozzle. The big advantage of a slot nozzle is its closed, hermetically sealed system, which is especially advantageous for reactive Holtmelt. Mostly on webs in a ...
Baar, Switzerland
Foaming
new
- Manufacturer: Balti AG
Up to 100-800% (adhesive dependent) Inert gas (mostly N2) in the form of small, compressed air bubbles is homogeneously mixed into the pressurized hotmelt in a controlled dosing and mixing unit (dynamic). Those e...
Baar, Switzerland
Static Mixer
new
- Manufacturer: Balti AG
With the use of "high-end" steel mixing elements, hotmelt can be mixed in-line as efficiently as possible. Depending on the material properties and requirements, the mixing elements are installed directly on the ...
Baar, Switzerland
Dynamic Mixer
new
- Manufacturer: Balti AG
For very demanding applications (e.g. extreme differences in viscosity), a dynamic mixing head is used for temperatures up to 200°C.
Baar, Switzerland
Roller Coater
new
Beschichten mit der Walzenauftragstechnik ist weit verbreitet. balti hat sich in den letzten Jahren einen ausgezeichneten Namen erarbeitet mit einem umfassenden und qualitativ auf höchstem Niveau operierenden Hot...
Baar, Switzerland
Tank Melter
new
The balti tank melters are built to the highest quality level and come in many variants for practically every application thanks to their modular design. For melting and conveying of meltable, non-reactive, self-...
Baar, Switzerland
Coloration
new
- Manufacturer: Balti AG
Special color is added in quantities of 0.5 to 3%, usually with a static mixer (color mixer - FM). Ideally, the color is added as close as possible to the nozzle to reduce waste during color change.
Baar, Switzerland
Tip: Enter manufacturer, model or keyword