Used Materials Testing in Shandong, China

High Temperature Clip-On Gages (700 °C) – Model 7641

These COD gages use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7...

High Temperature Transverse Extensometers (700 °C) – Model 7675

These transverse extensometers use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testi...

Long Gauge Length Axial Extensometers – Model 3542L

• Manufacturer: Epsilon

Long gauge length extensometers with gauge lengths greater than 2 inches (50 mm) for tensile and compression testing. These units have been specially designed for long gage length applications where low level str...

570HAD Digital Multi-functional Hardness Tester

Testing force（n）: Initial Testing Force | Total testing force: 588.4（60kg） | Indenter: Diamond Vickers Indenter | Scales: HBW1/30 | Max height of samples: 175mm | Hardness scale: Value of Hardness Block | Hra: ...

HPS-20 automatic plaster hardness tester with software c

Item: Quantity | Host: 1 | Test anvil: 1 | Instrument case: 1 | Data software: 1

Circumferential Extensometers – Model 3544

Circumferential extensometers measure the change in circumference as the sample is compressed. This is considered by many researchers to be a more accurate way to determine diametral strain, since the measurement...

HBRV-187.5 Motorized Brinell Rockwell & Vickers Hardness

• Manufacturer: Vickers

Hardness scale: Displayed Value of Hardness Test Block | Hra: 20～≤75HRA | >75～≤88hra: ±1.5HRA | Hrb: 20～≤45HRB | >45～≤80hrb: ±3HRB | >80～≤100hrb: ±2HRB | Hrc: 20～≤70HRC | Hardness value of standard testing blo...

HBV-30A BRINELL & VICKERS HARDNESS TESTER

• Manufacturer: Vickers

DX-400 Gauging Length Instrument of Tensile Specimen

• Manufacturer: JINAN LIANGONG TESTING TECHNOLOGY

1. Overview DX-400 Manual Tensile Specimen Gauge Length Meter is the specialized equipment which is designed and made according to national standard GB/T228-2010. Gauge length is correct, high-efficient and easy ...

Knife Edges for Extensometers

• Manufacturer: jinan testing equipment ie

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: TE

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: jinan testing equipment ie

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HR-150A Rockwell Hardness Tester

• Manufacturer: Wilson Rockwell

Use HR-150A Rockwell hardness tester is the most popular Rockwell hardness tester, widely used to measure the Rockwell hardness of ferrous metals, non-ferrous metals, non-metallic materials, quenching and quenchi...