Used processing

2004 Feldmeier Tube in Tube

• Manufacturer: Feldmeier

Feldmeier tube in tube pasteurizer/heat exchanger, 22 Feet long x 5 feet wide, Last heated product to 190ºF, Hold time of 25 seconds at 150 Gallons/Minute with extended holding tubes, heat extraction hood, Balanc...

2017 Flex Rite 3 Inch Product Transfer Hose – 7 Feet Long

• Manufacturer: Flex Rite

Stainless Steel Interior Last used for pumping HFCS Sugar at Beverage Plant

Filamatic Filler, Model DAB-Z-5-4

• Manufacturer: Filamatic

Filamatic Filler, Model DAB-Z-5-4 Used Filamatic filler, model DAB-Z-5-4, 4 pump design less pistons, 115 volt, serial# C005566.

2015 KHS Pasteurizer

• Manufacturer: KHS

Setup for Juice, 50 Gallons/Minute, Incoming Product Temperature 65ºF minimum – incoming product temperature max is 85ºF, Target Hold Time 15 seconds, 460 Volts, 3PH, 60HZ, Water 40 PSIG, Air 80 PSIG, Steam PSIG,...

Single Gallon Piston Filler, Rigging/ Removal Fee: $50

Single Gallon Piston Filler, Rigging/ Removal Fee: $50

Dual-Gallon Piston Filler, Rigging/ Removal Fee: $50

Dual-Gallon Piston Filler, Rigging/ Removal Fee: $50

- IPP# 220442

• Manufacturer: RNS (R & S) Corp

Impulse Sealer 600Watt AC 220-240V

1990 KRACK - LOW TEMP #PC53H-6010-3-5-RBA-HGU

• Manufacturer: KRACK

Used Krack Corp Ammonia Coil Refrigeration Heat Exchanger - LOW TEMP TWO UNITS AVILABLE Used Krack Corp Ammonia Coil Refrigeration Heat Exchanger 30 Ton Air Flow 55600 CFM Fan Speed 1750 RPM Three 5hp Fans ...

2000 KRACK CORP - MED TEMP #BTRS-418-RBA-HGC

• Manufacturer: KRACK CORP

Used Krack Corp Ammonia Coil Refrigeration Heat Exchanger - MED TEMP - SEVEN UNITS AVILABLE Used Krack Corp Ammonia Coil Refrigeration Heat Exchanger 15 Ton Air Flow 21600 CFM Fan Speed 1175 rpm Four .5hp Fa...

GEI Turbo MUL4 ARC Piston Filler 4 Head Piston Style Liquid Filler Bottle Can

• Manufacturer: GEI Turbo

Used I bought this out of a warehouse and I do not know its history. I did not power it up. I do not know how to operate this machine or if it has something missing parts so I am listing it for parts not working....

Aerosol Can Bottle Rotary Puck Inserter/Remover for Bottle Filling Capper Line

Not sure if this unit is complete, it appears to have some components removed. The drive is tested and works. 63"x63" cabinet. 67" height. 30" feed wheel dia. 230/460V 3PH drive. If this item ships as Flat Rate ...

Morrison Bottle Filling Screw Feeder Puck/Capper 10-Head Rotary Unit

• Manufacturer: Morrison

Unit is untested. Includes screw feeder and 10-head rotary unit. Control panels look mostly complete. 1/2Hp 230/460V drive motor. 36"x 42" x 82" height cabinet. Includes everything pictured. If this item ships as...

2010 Sullair C25MA

• Manufacturer: Sullair

500 hp Sullair ammonia compressor Rebuilt by M and M refrigeration. approx 2010 460/3/60 Elec Control panel and soft starter 14’L X 5’W X 8 1/2’ Ht