Used Processing in Japan

Tokuju Kosakusho 1000φ
- Manufacturer: Tokuju Corporation
Frame only No tray bowl, etc. *Please check compatibility with other companies' sieves. Measure the edge diameter of the frame and if it is close to the model you are considering, it may be compatible. *Compatibi...
Hiroshima, Japan
Shinko Electric FH-33 BDT
- Manufacturer: Shinko
Remarks No controller Material: SUS | Quantity saved: One | Size: External dimensions: 800W x 2000L x 700H Trough internal dimensions: 610W x 1067L
Hiroshima, Japan
Dalton 1001
- Manufacturer: Dalton
Screening frame diameter: φ1000, 1 stage, 2 types Motor 1.5kw cassette screen With casters There are dents on the frame and the discharge port.
Hiroshima, Japan
Mitsubishi / Maki Shinko WEX 80
- Manufacturer: Mitsubishi
MOTOR: Mitsubishi 0.75kw/4p 1400rpm/50Hz RATIO: 1/20
Hiroshima, Japan
1997 Lhasa Industry ATS 600 DS
- Manufacturer: Lhasa Industry
Argyre shifter Material of powder contact part: SUS Motor: 0.4kw The oscillating mechanism is more efficient than the vibrating type. The sifting particles do not bounce on the mesh surface as they do in the vibr...
Hiroshima, Japan
1992 Tokuju Kosakusho GS-C2
- Manufacturer: Tokuju Corporation
排出口2ヵ所。予備網あり。 [メーカー商品ページURL] Power: 0.75Kw 200V | Material: Gluing section SUS | Quantity saved: 1
Hiroshima, Japan
Tokujyo Corporation GS-B 2
- Manufacturer: Tokujyo Corporation
Material of powder contact parts: SUS 3 outlet ports No screen frame
Hiroshima, Japan
Shintaku Kogyo SKR-12R
- Manufacturer: Shintaku Kogyo
Purchasing area: 60Hz | Material: SUS + resin | Quantity saved: １
Hiroshima, Japan
hot melt
- Manufacturer: Daiichi Bussan Co.
Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
[NDR] Ram Press
- Manufacturer: Daiichi Bussan Co.
Maximum pressure: 6.9 MPa Power: 0.75 Kw / 200 V | Purchasing area: 60Hz | Material: Wetted part SUS · Other SS | Quantity saved: 1
Hiroshima, Japan
1995 Ryosei RD200-2-2.2M
- Manufacturer: 了生
Air volume: 200 m3/min Static pressure: 30 mmAq Shaking type
Kure, Japan
1974 Electric guillotine
Width: 550mm × Stroke: 800mm (Effective: 750mm) There is a pain in the blade.
Kure, Japan
1998 Ebara Corporation ML-320 type
- Manufacturer: 荏原工機
Made of steel, 1 stage, 2 kinds of division Eurus motor Tilting type
Kure, Japan
Joint oil machine KH-2 type
- Manufacturer: KYOD
Pressing pressure: 100TON 2 units 150TON 1 unit 200TON 1 unit Electric heater & steam heating type with hydraulic system Stroke: 500mm Upward moving type
Kure, Japan
Trusted Seller
‘SUMITOMO’ Coil Preparation Line
- Manufacturer: Sumitomo
The Coil Preparation Line, built in 1987 by Sumitomo Heavy Industries, represents a robust solution for processing low-carbon steel with high accuracy and efficiency. This line delivered reliable performance for ...
Japan
Niigata NR282 Injection Molding
- Manufacturer: Niigata
- Model: NR282
Good condition Niigata NR282 Injection Moldings manufactured in 2010. Located in Japan and other countries. Click request price for more information.
Japan