Used Processing in Ontario, Canada

PFS Plastic Film Sealer

• Manufacturer: PFS

-Shipping dimensions: Height - 13" x Width - 18" x Length - 4" -Power: 150-300-400-650W (IMPULSE) -Source: AC110V/60Hz

Cone Mixer

• Manufacturer: SEW-Eurodrive

-Cone container with top mount mixer -Steel stand -SEW-EURODRIVE motor: 230/460 V, 60 Hz, 8.60/4.30 amp, 3 HP, 1700 RPM -Rapport ratio: 62.18:1 -Pos. Montage. Mtg: H5

7 1/2 HP Blower

-Shipping dimensions: Height - 30" x Width - 22" x Length - 42" -Brook Cromptom motor: HP 7.5, 3480 RPM, 575 V, 7.6 A, Type TEFV, 3 PH,

Stainless Auger

• Manufacturer: Rossi Motoriduttori

-Shipping dimensions: 102" L x 22" W x 28" H Rossi Motoriduttori: -3 kW -n2: 175 min

Mixing tank

• Manufacturer: Nord

- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" - 4 legs are 23" - Stainless steel - Chemical use - Dome bottom

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping Dimensions: 12" length x 12" width x 12" height -Input/output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

DAF System

• Manufacturer: DAF

Aer-O-Flo DAF System Leeson motor: -model C4T17FH3B -RPM: 725 -Volt: 575 -Hz: 60 -HP: 1/2 -Cont duty Baldor Motor: -Frame: 145TC -HP: 2 -Volts: 575 -Amps: 2 -RPM: 1750 -HZ: 60 -3 Phase -Class F

Mixing Tank

- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" -4 legs are 23" - Stainless steel - Chemical use - Dome bottom

Neutro-Vac

• Manufacturer: Simco

-Shipping dimensions: 30" L x 24" W x 52 1/2" H -Intake: 2" -208 V -60 Hz -3 Phase -1 Hp -Model: DC 550

Jacketed Stainless steel Tank with a Steam Heating Coil

-Diameter: 84" -Height of tank: 144" -24" side mounted inspection hatch -Distance from the bottom outlet to the ground: 10" -Jacketed -Has steam heating coil -Three viewing ports with LED lights on top of tank -7...

Gandus Saldatrici Tb - 3 Grease line heat Sealer

• Manufacturer: Gandus

-Shipping dimensions: Height - 20" x Width - 29" x Length - 16" -115 V -50/60Hz -Comes with case

Above Ground Steel Tank for Fuel/Oil

• Manufacturer: Hassco industries inc

-Shipping dimensions: length 36" x width 26" x height 60" -Double wall, ULC rated -227 L -2.5mm thick primary tank

Stainless-steel Holding Tank

-Diameter: 40" -Height: 40" -2" fill and discharge ports -Distance from the ground to the bottom outlet: 13.5" -22" top hatch -Cone bottom -Flange connections -Total dimensions: Height: 69" -Width: 40" -Approxima...

Stainless Steel Tank

-Supported with 4 legs -dome bottom -flat top -304 stainless steel -7069 IMP Gallons -Tank is 232" tall with the legs it is 273" tall

Jacketed Stainless Steel Mixing Tank w/ pneumatic mixers

• Manufacturer: ADM Stainless Inc

-3 Legs at 14" tall -Dome bottom -1" drain on the bottom with shut off valve -Pneumatic Lightnin mixer: model XJA-33 -Half removable lid on top -Jacketed -Shipping: 79" tall x 42" wide -Tank dimensions: 41" tall ...