Used Processing in British Columbia, Canada

1989 36" 200psi Sweet Vertical Compressor start Gas Separator 2 Phase

• Manufacturer: Sure Weld Industries

Vessel mounted in compressor building. Service type: Sweet | Pasc condition rating: B | Skidded: No | Housed: Yes | Connection status: Connected | Vessel only: Yes | Separator type: Compressor start Gas | Diamete...

1989 30" 100psi Sweet Vertical Surge Drum Separator 2 Phase

• Manufacturer: Sure Weld Industries

Service type: Sweet | Pasc condition rating: B | Skidded: No | Housed: No | Connection status: Connected | Vessel only: Yes | Separator type: Surge Drum | Diameter: 30" | Diameter(unit of measure): inches | Sepa...

2000 48" 1370psi Sour Horizontal Inlet Separator 3 Phase

• Manufacturer: Plains oil Ltd.

Skid welded to piles. Condensate conditioner mounted in building.

1990 30" 1400psi Sweet Vertical Start Gas Make-up Separator 3 Phase

• Manufacturer: Nusco

Vessel mounted in compressor building. Mounted on concrete.

1989 24" 230psi Sweet Vertical 1st stage suction scrubber Separator 2 Phase

• Manufacturer: Sure Weld Industries

Vessel mounted in compressor building. Mounted on concrete.

1989 36" 200psi Sweet Vertical Compressor start gas Separator 2 Phase

• Manufacturer: Sure Weld Industries

Service type: Sweet | Pasc condition rating: B | Skidded: No | Housed: No | Connection status: Connected | Vessel only: Yes | Separator type: Compressor start gas | Diameter: 36" | Diameter(unit of measure): inc...

MUNTERS 30564-01

• Manufacturer: Munters
• Phase type: Single-phase

Technical Specifications PDF Operating and Maintenance Manual PFD

2 Saw Valley Trimmer

• Manufacturer: Valley

- 8' to 20' lug loader - Lugged transfer deck - Near end trim saw - Cross over rollcase - Valley push back roll - Far end trim saw - Still installed

MPM Scanner System - Two (2) Systems

• Manufacturer: MPM

- Originally designed for log sorting - Two (2) Hermary Opto combination scanners - Two (2) scanner frames - Two (2) scanner interface panels - Two (2) computers - Two (2) PLC cabinets (Modicon) Not Included: - ...

Sharp Chain Reducer Twin Bandmill System

• Manufacturer: Sharp

- To handle logs up to 18" in diameter x 20 feet long - VK log singulator - Sprocket style log turner c/w centering arms and overhead holddown rolls - 3" wide Sharp Chain c/w hydraulic drive - USNR reducer module...

Tanguay Model 460 Grapple Loader

• Manufacturer: Tanguay

Tanguay Model 460 Grapple Loader - Pedestal mounted on a side shift rail - Electric/hydraulically operated - Operator's cab and controls - Dismantled and ready to load onto trucks

Optimatic (Simonds) Model KRO970 Vertical Circle Saw Leveler

• Manufacturer: Optimatic (Simonds)

- Built in 2005 - Model KRO970 - 150mm min. diameter, 810mm maximum saw diameter - 1mm to 4mm flat thickness - Suitable for splined and slotted saw blades - 1155 hours - 480/3/60 - Dismantled and stored in a buil...

Hanchett Circular Saw Sharpener

• Manufacturer: Hanchett

- Model 724 - Serial #7731 - Good condition

84" SWING SAW - TWO (2) AVAILABLE

• Manufacturer: Canadian Mill Equipment

- 84" swing saw c/w 100 HP drive motor, 460/3/60 - Fabricated support frame - Hydraulic cylinder activated (no HPU) - Two (2) saw blades - Dismantled ready to load

Wood Fired Industrial Steam Plant

- Built in 1996, shut down in 2004 - Boiler capacity of 80,000 lbs/hour of steam at 450 psi - Could be retrofitted to cogeneration to produce 5 to 7 mega watts - Designed to burn hog fuel (estimated consumption u...