Used Tanks & Kettles in Germany

1600 liter tank, Aisi 304

notice: some residues of previous content, Metallic discolouration inside remarks: tank with a protective coating outside; dents and smaller cut-offs in the insulation jacket; handhole DN 250; Outlet with flanged...

8640 liter tank, Aisi 304

• Manufacturer: Behälter KG

notice: some residues of previous content, pipe end cut flush remarks: agitator shaft cut off; weldet screws on the tank surface outside (see pictures); 1 pipeline inside; manhole cylinder appr. 340 x 440 mm

1700 liter tank, Aisi 304

remarks: Adhesions and metallic discoloration inside the tank; lower bottom with smaller dents

6000 liter tank, Aisi 304

remarks: Manhole diameter approx. 425 mm; 1 height-adjustable screw of the feet is missing; pipes on the tank (partially cut off); internal fixtures (see photos)

3500 liter tank, Aisi 304

remarks: Diameter manhole appr. 455 mm; smaller dents in the inner cylinder; insulation cover of the lower bottom by plate of mild steel; tank 7061-2 with dents in the insulation jacket and an outlet DN 65 11851

1220 liter tank, Aisi 304

max. allowable working temperature: 60 °C remarks: 2 loose, height-adjustable bearing shells, Aisi 304; 1 manhole approx. 345 x 440 mm in the front bottom; partially 1 lifting eyelet on top of the tank; Inner len...

1000 liter tank, Aisi 304

remarks: 1 foot bent; tank with serveral dents; former connections were welded up by the previous operator; internal fittings in the container (see photos)

1200 liter tank, Aisi 304

remarks: Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos)

600 liter tank, Aisi 304

remarks: Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos)

600 liter tank, Aisi 304

remarks: Frame Fe, lacquered (corrosion); hand hole diameter approx. 330 mm (the handhole cover is missing on 1 tank)

6000 liter tank, Aisi 304

manhole: in the cylinder (appr. 340 x 440 mm), in the upper bottom remarks: Diameter manhole upper bottom approx. 410 mm; slight metallic discoloration inside the tanks

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

5000 liter tank, Aisi 304

• Manufacturer: Behälter KG Bremen

remarks: Frame, Aisi 304 (currently 4 wooden blocks are screwed under; see photos); Manhole approx. 345 x 440 mm

2500 Liter tank, Aisi 304

remarks: 1 manhole approx. 310 x 410 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new r...

1585 liter tank, Aisi 304

remarks: 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; Inner length: approx. 1,650 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm; the spout is slightly dented;...