Used Processing in Louisiana, USA

Process Systems Cooling Tower Water Pump Assembly with Tank and Cooling Water Filtration System

Process Systems Cooling Tower Water Pump Assembly and Cooling Water Filtration System Skid mounted system (2) tower process water pumps- 60 horse power each with 1000 gpm flow at 175’ TDH 450 gallon plastic roto ...

Novatec Model NWB-25 Material Dryer and Novatec Model 60# HPR Insulated Hopper

• Manufacturer: Novatec

Novatec Model NWB-25 Material Dryer and Novatec Model 60# HPR Insulated Hopper Material flow- 25 pounds per hour Water Inlet/Outlet- 3/8” Flow rate- .25 gallons per minute Controls- Novatec Model NovaTouch Color ...

2010 York YCIV 157

• Manufacturer: York

Equipment condition: Rebuilding Process | Voltage and phase: 460 Volt 3 Phase | Condenser type: Air-cooled | Refrigerant type: R-134A

2001 Trane RTAA 70

• Manufacturer: Trane

Reconditioned and comes with a warranty. Equipment condition: In the rebuilding process | Voltage and phase: 460 Volt 3 Phase | Compressor type: Screw | Condenser type: Air Cooled | Refrigerant type: R-407

2012 Trane RTAC155

• Manufacturer: Trane

Equipment condition: In the rebuilding process | Voltage and phase: 460 Volt 3 Phase | Compressor type: Screw | Condenser type: Standard with low ambient | Refrigerant type: R-134

Derrick DE-1000 FHD Centrifuge

• Manufacturer: Derrick

www.VIDAEQ.com 🔥 Derrick DE 1000 FHD Decanter Centrifuge This package was refurbished in October 2023. It has been lightly used since then 👉 Viewing this on Machinio? Then follow this link to view the full Equi...

500 Gal Perry Receiver, 304 S/S, 75/75#

• Manufacturer: Perry Products

500 Gal Perry Receiver, 304 S/S, 75/75# Used 500 gallon Perry Products receiver, 304 stainless steel construction, approximately 48" diameter x 60" straight side, dished top and bottom, rated 75 PSI and full vacu...

2004 Thermal Care (30) ton Water Cooled Chiller

• Manufacturer: Thermal Care

2004 Thermal Care (30) ton Water Cooled Chiller Type- Water cooled Capacity- 30 ton Compressor- (2) 15 horse power Process pump (1) 10 horse power Year- 2004 Condition- very good

Thermal Care Model LQ2W3004 30 Ton Chiller

• Manufacturer: Thermal Care

Thermal Care Model LQ2W3004 30 Ton Chiller Type- Water cooled Serial number- 01721010306 Capacity- 30 Ton Compressor – (2) 15 horse power Process pump- (1) 10 horse power Refrigerant- R-22 Voltage- 460/3/60 Year-...

Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine

• Manufacturer: Siapi

Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine Year- 2005 Number of mold cavities- 2 (can go up to 4) Neck finish- Currently set up for 43 mm Bottles per minute- 30 Currently processing 1-gallon...

Cumberland Model 24B GRAN 3KN (50) Horse Power Granulator

• Manufacturer: Cumberland

Cumberland Model 24B GRAN 3KN (50) Horse Power Granulator Horsepower- 50 Cutting chamber- 15″ x 24″ Cutting Circle- 14″ Feed throat opening- 18″ x 24.” Rotor knives- 3, high sheer Bed Knives- 2 Airveyor discharge...

Uniloy Model 350 R4 (6) Head Reciprocating Screw Blow Molding Machine

• Manufacturer: Uniloy

Uniloy Model 350 R4 (6) Head Reciprocating Screw Blow Molding Machine (Complete Line) Serial number- 4134 Machine has side shift capability that enables the machine to produce off set center neck finishes Head co...

Uniloy Model 350 R3 (6) Head Reciprocating Screw Blow Molding Machine

• Manufacturer: Uniloy

Uniloy Model 350 R3 (6) Head Reciprocating Screw Blow Molding Machine Head configuration- 6 heads with 8″ center distances between heads Heads are programmable Extruder diameter- 3.75″ Extruder horse power- 125 N...

Uniloy Model 122-3 Injection Blow Molding Machine

• Manufacturer: Uniloy

Uniloy Model 122-3 Injection Blow Molding Machine Year- 2006 Clamp force total- 122 tons Clamp force blow side- 19 tons Clamp force injection side- 103 tons Maximum stack height- 22″ Maximum die set width- 38″ Ma...

Tech-Long Model CPX8 (8) Cavity PET Reheat Stretch Blow Molding Machine

Tech-Long Model CPX8 (8) Cavity PET Reheat Stretch Blow Molding Machine Type system- linear oven/rotary wheel Date of manufacture- 2017 Number of oven spindles- 174 Bottle size capability- 200 ml to 2.5 liter Bot...